High resolution characterization of grain boundaries in Cu2ZnSnSe4 solar cells synthesized by nanoparticle selenization
Source abstract
Abstract
Abstract We report a novel fabrication and multiple high resolution characterizations of Cu 2 ZnSnSe 4 solar cells. The fabrication is based on nanoparticle precursor production by liquid-phase pulsed laser ablation (LP-PLA), electrophoretic deposition of precursor thin film under ambient condition, and selenization. Columnar grain boundaries are studied using spatially mapped Raman spectroscopy and scanning probe microscopy for their compositional and electrical properties. We observe high electrical conductivity near columnar grain boundaries, and propose poor Cu composition as the cause of the enhancement of the collection of minority carriers. We also study horizontal grain boundaries using cross-sectional scanning transmission electron microscopy (STEM). Combining with the device I-V and quantum efficiency, we suggest that the horizontal grain boundaries act as barriers to the transportation of minority carriers. CZTSe cells with efficiencies of 4.77% and 2.20% are compared.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Optical designs that improve the efficiency of Cu2ZnSn(S, Se)4 solar cells10.1039/C3EE42541J ↗
2. Thermally evaporated Cu2ZnSnS4 solar cells10.1063/1.3499284 ↗
3. Detection of a ZnSe secondary phase in coevaporated Cu2ZnSnSe4 thin films10.1063/1.3558706 ↗
4. Thin film solar cell with 8.4% power conversion efficiency using an earth-abundant Cu2ZnSnS4 absorber10.1002/pip.1174 ↗
5. Cu2ZnSnS4-type thin film solar cells using abundant materials10.1016/j.tsf.2006.12.103 ↗
6. Enhanced conversion efficiencies of Cu2ZnSnS4-based thin film solar cells by using preferential etching technique10.1143/APEX.1.041201 ↗
7. Cu2ZnSn(S1−xSex)4 based solar cell produced by selenization of vacuum deposited precursors10.1016/j.solmat.2012.02.016 ↗
8. High-efficiency solar cell with earth-abundant liquid-processed absorber10.1002/adma.200904155 ↗
9. Device characteristics of a 10.1% hydrazine-processed Cu2ZnSn(Se,S)4 solar cell10.1002/pip.1160 ↗
10. Low band gap liquid-processed CZTSe solar cell with 10.1% efficiency10.1039/c2ee00056c ↗
11. Beyond 11% efficiency: characteristics of state-of-the-art Cu2ZnSn(S,Se)4 solar cells
12. Fabrication of a Cu2ZnSn(S,Se)4 photovoltaic device by a low-toxicity ethanol solution process10.1021/am402558a ↗
13. Earth abundant element Cu2Zn(Sn1−xGex)S4 nanocrystals for tunable band gap solar cells: 6.8% efficient device fabrication10.1021/cm2002836 ↗
14. Enhancing the performance of CZTSSe solar cells with Ge alloying10.1016/j.solmat.2012.05.039 ↗
15. Fabrication of 7.2% efficient CZTSSe solar cells using CZTS nanocrystals10.1021/ja108427b ↗
16. Cu2ZnSnS4 thin film solar cells from electroplated precursors: novel low-cost perspective10.1016/j.tsf.2008.11.061 ↗
17. Phase composition of selenized Cu2ZnSnSe4 thin films determined by X-ray diffraction and Raman spectroscopy10.1016/j.tsf.2011.01.388 ↗
18. Dickerson · 2012
19. Liquid-phase pulsed laser ablation and electrophoretic deposition for chalcopyrite thin-film solar cell application10.1021/am3022976 ↗
20. Numerical simulation of grain boundary effects in Cu(In, Ga)Se2 thin-film solar cells10.1016/j.tsf.2004.11.043 ↗
21. Grain-boundary recombination in Cu(In, Ga)Se2 solar cells10.1063/1.2133906 ↗
22. Anomalous grain boundary physics in polycrystalline CuInSe2: the existence of a hole barrier10.1103/PhysRevLett.91.266401 ↗
23. Electrically benign behavior of grain boundaries in polycrystalline CuInSe2 films10.1103/PhysRevLett.99.235504 ↗
24. Effects of Na on the electrical and structural properties of CuInSe210.1063/1.370534 ↗
25. Grain-boundary physics in polycrystalline CuInSe2 revisited: experiment and theory10.1103/PhysRevLett.96.205501 ↗
26. Evidence for a neutral grain-boundary barrier in chalcopyrites10.1103/PhysRevLett.97.146601 ↗
27. Local built-in potential on grain boundary of Cu(In, Ga)Se2 thin films10.1063/1.1737796 ↗
28. Does the local built-in potential on grain boundaries of Cu(In, Ga)Se2 thin films benefit photovoltaic performance of the device?10.1063/1.1793346 ↗
29. Kelvin probe force microscopy for the nano scale characterization of chalcopyrite solar cell materials and devices10.1016/S0040-6090(03)00267-0 ↗
30. Direct observation of copper depletion and potential changes at copper indium gallium diselenide grain boundaries10.1063/1.1906331 ↗
31. Direct evidence for a reduced density of deep level defects at grain boundaries of Cu(In, Ga)Se2 thin films10.1103/PhysRevLett.105.116802 ↗
32. Grain boundaries in Cu(In, Ga)(Se, S)2 thin-film solar cells10.1007/s00339-008-4978-0 ↗
33. Defect physics of the kesterite thin-film solar cell absorber Cu2ZnSnS410.1063/1.3275796 ↗
34. Low band gap liquid-processed CZTSe solar cell with 10.1% efficiency10.1039/c2ee00056c ↗
35. Raman scattering and disorder effect in Cu2ZnSnS410.1002/pssr.201307073 ↗
36. The electrical properties of polycrystalline silicon films10.1063/1.321593 ↗
37. Compositionally induced valence-band offset at the grain boundary of polycrystalline chalcopyrites creates a hole barrier10.1063/1.2132537 ↗
38. S.S. Schmidt, Microscopic properties of grain boundaries in Cu(In, Ga)2 and CuInS2 thin-film solar cells studied by transmission electron microscopy, 2011.
39. On microscopic compositional and electrostatic properties of grain boundaries in polycrystalline CuIn1–xGaxSe210.1116/1.2209995 ↗
40. Piezoresistive sensitivity, linearity and resistance time drift of polysilicon nanofilms with different deposition temperatures10.3390/s90201141 ↗