Modification of high temperature radiation absorption properties of solid particles with surface coating
Source abstract
Abstract
The coatings with different thermodynamic and optical properties can adjust and improve the overall performance of solid particles in solid particle solar receivers (SPSRs). In this work, the manganese iron black (PBK26) coating is prepared by water bath method and comprehensive performance of the coating is found to be the best when Fe/Mn molar ratio in PBK26 is 4:1. The high temperature radiation absorption performances of different solid particles coated by PBK26 are investigated. The results show that the spectral absorptivity of particles can be greatly improved by coating. The average spectral absorptivity of quartz sand, bauxite and mullite increases by 25.9%, 20.8% and 16.2%, respectively. However, the coated quartz sand appears coating shedding phenomenon at high temperatures, and the coating on bauxite is not complete. Only the coated mullite shows excellent coating effect and thermal stability. After long-period high temperature thermal stability experiments at 900 °C and cyclic thermal stability experiments of 30 cycles, the maximum mass loss of coated mullite is less than 0.4% and the spectral absorptivity is almost unchanged. In the wear resistance experiments the surface debris of the coated mullite increases. And there is a mass loss of 8.244% with a coating thickness loss of 27% and a spectral absorptivity decrease of 3.88% after 10 h of wear at 900 rpm. The results imply good high temperature thermal stability and acceptable wear resistance of PBK26 coated mullite, which provide an option for high temperature radiation improvement of solid particles.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solar Thermal and Photovoltaic Systems · Heat Transfer Mechanisms · Nanofluid Flow and Heat Transfer
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. A novel approach to high temperature solar receivers with an absorbing gas as heat transfer fluid and reduced radiative losses10.1016/j.solener.2019.03.004 ↗
2. An overview of thermal energy storage systems10.1016/j.energy.2017.12.037 ↗
3. Thermal energy storage technologies for concentrated solar power - a review from a materials perspective10.1016/j.renene.2019.10.127 ↗
4. High temperature systems using solid particles as TES and HTF material: a review10.1016/j.apenergy.2017.12.107 ↗
5. Energy analysis of a particle suspension solar combined cycle power plant10.1016/j.enconman.2018.02.067 ↗
6. A comprehensive review on solid particle receivers of concentrated solar power10.1016/j.rser.2019.109463 ↗
7. Receiver with light-trapping nanostructured coating: a possible way to achieve high-efficiency solar thermal conversion for the next-generation concentrating solar power10.1016/j.renene.2021.12.026 ↗
8. High-temperature ceramic coatings for energy saving applications
9. Solar absorptive coating: a thermally stable spinel pigment based coating with inorganic binder for waterborne paint10.1108/PRT-06-2020-0065 ↗
10. Solar selective reflector materials: another option for enhancing the efficiency of the high-temperature solar receivers/reactors10.1016/j.solmat.2021.110995 ↗
11. Bose · 2018 · 199
12. Green organic films and coatings: developments and future challenges10.2174/1570193X18666210225121946 ↗
13. A high-temperature thermal stability and optical property study of inorganic coatings on ceramic particles for potential thermal energy storage applications10.1016/j.solmat.2022.111679 ↗
14. Structurally improved, TiO2-incorporated, CaO-based pellets for thermochemical energy storage in concentrated solar power plants10.1016/j.solmat.2021.111076 ↗
15. Performance test and heat resistance of physical and chemical coated iron oxide black pigment10.1142/S0218625X22500068 ↗
16. Thermodynamic and kinetic investigation of a technical grade manganese-iron binary oxide for thermochemical energy storage10.1016/j.solener.2017.05.045 ↗
17. Vogler · 2021 · I
18. Formation, structure, and optical properties of copper chromite thin films for high-temperature solar absorbers10.1016/j.mtla.2021.101156 ↗
19. High-efficiency, air-stable manganese-iron oxide nanoparticle-pigmented solar selective absorber coatings toward concentrating solar power systems operating at 750°C
20. Characterization of Pyromark 2500 paint for high-temperature solar receivers10.1115/1.4024031 ↗
21. A study of metallic coatings on ceramic particles for thermal emissivity control and effective thermal conductivity enhancement in packed bed thermal energy storage10.1016/j.solmat.2021.111458 ↗
22. Assessment and improvement of optical properties of particles for solid particle receiver10.1016/j.solener.2020.02.076 ↗
23. New coloured coatings to enhance silica sand absorbance for direct particle solar receiver applications10.1016/j.renene.2020.01.053 ↗
24. A high-temperature thermal stability and optical property study of inorganic coatings on ceramic particles for potential thermal energy storage applications10.1016/j.solmat.2022.111679 ↗
25. The development of direct absorption and storage media for falling particle solar central receivers10.1115/1.4030069 ↗
26. Mullite ceramic foams with tunable pores from dual-phase sol nanoparticle-stabilized foams10.1016/j.jeurceramsoc.2021.12.008 ↗
27. Optimization of sol-gel combustion synthesis for calcium looping CO2 sorbents, part I: effects of sol-gel preparation and combustion conditions
28. Synthesis of bismuth ferrite by sol-gel auto combustion method: impact of citric acid concentration on its physicochemical properties10.1016/j.matchemphys.2022.125983 ↗
29. Review of the spectrally selective (CSP) absorber coatings, suitable for use in SHIP10.1016/j.solmat.2022.111625 ↗
30. Particles in a circulation loop for solar energy capture and storage10.1016/j.partic.2018.01.009 ↗
31. Physical property design of multi-component particle systems as heat transfer medium for directly irradiated solar receiver10.1016/j.applthermaleng.2022.119470 ↗
32. Optical properties and thermal stability of Cu spinel oxide nanoparticle solar absorber coatings10.1016/j.solmat.2019.02.032 ↗