journal article·2023-10

Validation of methodology to determine the contact resistivity of ECA-based bonds grounded on end–contact resistance measurements using redundant and modified TLM test structures

M. Ignacia Devoto, Karl Wienands, Dominik Rudolph, Tudor Timofte, Andreas Halm, Ralph Gottschalg, Daniel Tune

Publisher page

Abstract

Accurate determination of the contact resistivity between electrically conductive adhesives (ECAs) and solar metallization paste is a key component of optimizing the electrical performance of bonds based on ECAs, such as shingled joints. This work proposed and validates a methodology that accounts for non–negligible inhomogeneities of test structures based on ECAs and silver screen-printed metallization, such as changes in width of the ECA, to improve the accuracy in the calculation of the contact resistivity. The proposed validation uses statistical theory based on the central limit theorem and the law of large numbers showing that the contact resistivity of bonds based on two different commercially available ECAs can be clearly differentiated with a minimum confidence level of 95% and a maximum error margin of 5%. Moreover, the necessary sample size to achieve such requirements is calculated and shown to be equal to 24 test structures. The validation was done using an acryl-based adhesive loaded with silver flakes (∼10 −4 Ω cm), which was compared to an epoxide-based ECA filled with silver–coated copper particles (∼10 −3 Ω cm). The validated methodology indicates that the contact resistivity when using the acrylic conductive adhesive is 0.1791 ± 0.0766 mΩ cm 2 while when using the epoxide-based adhesive is 0.5025 ± 0.1218 mΩ cm 2 . Additionally, it is shown that the standard deviation of the contact resistivity is highly dependent on the composition of the conductive adhesive. Hence, the sample size varies depending on the ECA. It is expected that the presented methodology will be a powerful instrument for developers and researchers in the improvement and optimization of ECAs and ECA bonding processes.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Integrated Circuits and Semiconductor Failure Analysis · Electronic Packaging and Soldering Technologies · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Influence of micro– and macrostructure when determining the contact resistivity of interconnects based on electrically conductive adhesives10.1016/j.solmat.2023.112490 ↗
2. How to assess the electrical quality of solar cell interconnection in shingle solar modules
3. Metal/semiconductor contact resistivity and its determination from contact resistance measurements10.1016/S0920-2307(88)80006-9 ↗
4. Electrical modelling of Kelvin structures for the derivation of low specific contact resistivity
5. Kelvin test structure modeling of metal-silicide-silicon contacts10.1557/PROC-514-363 ↗
6. Accurate contact resistivity extraction on Kelvin structures with upper and lower resistive layers10.1109/16.848288 ↗
7. An evaluation of test structures for measuring the contact resistance of 3-D bonded interconnects
8. Contact resistivity of ECA bonded joints10.1063/5.0055980 ↗
9. Contact resistivity of ECA bonded joints: how to extrapolate it?
10. Measuring the contact resistivity of ECA-based joints
11. Improved measurements of the contact resistivity of ECA-based joints
12. Shockley · 1964
13. Contact resistance on diffused resistors
14. Contact resistance and contact resistivity10.1149/1.2404240 ↗
15. Models for contacts to planar devices10.1016/0038-1101(72)90048-2 ↗
16. Obtaining the specific contact resistance from transmission line model measurements10.1109/EDL.1982.25502 ↗
17. Statistical modeling of transmission line model test structures. I. The effect of inhomogeneities on the extracted contact parameters10.1109/16.62287 ↗
18. Statistical modeling of transmission line model test structures. II. TLM test structure with four or more terminals: a novel method to characterize nonideal planar contacts in presence of inhomogeneities10.1109/16.62288 ↗
19. Limited by our limitations10.1007/S40037-019-00530-X ↗
20. Snedecor · 1989
21. Inferences for two or more means