journal article·2022-01

Investigation of laser doping and plating process for cost-effective PV metallization

Yuan-Chih Chang, Sisi Wang, Rong Deng, Shaoyuan Li, Jingjia Ji, CheeMun Chong

Publisher page

Abstract

Abstract Plating has long been recognized as a promising alternative to screen printing in commercial PV metallization due to its cost-saving and scaling-up potential. In this paper, we investigated the laser doping effects on plated contact formation. Critical parameters, such as laser power, focal position, and scanning speed, have been systematically analyzed by comparing their impacts on surface morphology, electrical properties, and plating results. Moreover, it was found the LD openings made by different laser resources would need different plating strategies. We have also successfully developed a baseline procedure integrating laser doping and hydrogenation passivation for bifacial plated PERC solar cells. Despite severe technical challenges in experimental conditions, up to 20.4% cell efficiency has been achieved, which evidentially demonstrates the commercial potential of plated contacts.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Photovoltaic System Optimization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Solar cell efficiency tables (version 56)10.1002/pip.3303 ↗
2. Taylor
3. Garside · 2020
4. Review—research needs for photovoltaics in the 21st century10.1149/2162-8777/abd377 ↗
5. Review of the potential of the Ni/Cu plating technique for crystalline silicon solar cells10.3390/ma7021318 ↗
6. Evolution of metal plating for silicon solar cell metallisation10.1002/pip.2221 ↗
7. Crystalline silicon solar cells with nickel/copper contacts
8. Toledo PV plant 1 MWp - 20 Years of operation
9. Challenges facing copper-plated metallisation for silicon photovoltaics: insights from integrated circuit technology development10.1002/pip.3062 ↗
10. Plated Ni/Cu/Ag for TOPCon solar cell metallization
11. Improved LDSE processing for the avoidance of overplating yielding 19.2% efficiency on commercial grade crystalline Si solar cell10.1016/j.solmat.2011.07.030 ↗
12. Geisler · 2015
13. Optimizing adhesion of laser structured plated Ni-Cu contacts with insights from micro characterization
14. The importance of surface roughness in the adhesion of electroless-plated metal in inkjet printed grooves
15. Ni/Cu/Ag plated contacts: a study of resistivity and contact adhesion for crystalline-Si solar cells, Electron
16. Budi Santoso Tjahjono · 2010
17. Advanced passivation of laser-doped and grooved solar cells10.1016/j.solmat.2019.01.025 ↗
18. Molpeceres · 2012 · 847308
19. Design rules for solar cells with plated metallization10.1016/j.egypro.2015.03.291 ↗
20. Sugianto · 2011
21. Selective emitter solar cell through simultaneous laser doping and grooving of silicon followed by self-aligned metal plating10.1016/j.solmat.2017.05.018 ↗
22. The effect of different laser wavelengths on bificial plated laser doped selective emitter solar cells
23. Advanced hydrogenation of dislocation clusters and boron-oxygen defects in silicon solar cells
24. Plated contacts for solar cells with superior adhesion strength to screen printed solar cells10.1007/s11708-016-0428-4 ↗
25. Investigation of emitter homogeneity on laser doped emitters10.1016/j.egypro.2011.06.129 ↗
26. Doping profile measurement on textured silicon surface10.1051/epjpv/2018001 ↗
27. 532 nm laser treated selective emitter profiles study with SIMS and ECV technics
28. Spectral mismatch and solar simulator quality factor in advanced LED solar simulators10.7567/JJAP.56.08MB24 ↗
29. 18.9% efficient laser doped selective emitter solar cell on industrial grade p-type Czochralski wafer
30. Development of advanced hydrogenation processes for silicon solar cells via an improved understanding of the behaviour of hydrogen in silicon