Microstructure beneath screen-printed silver contacts and its correlation to metallization-induced recombination parameters
Source abstract
Abstract
Abstract In this work, we present an approach to model metallization-induced recombination losses j0,met of screen-printed fire-through metallization pastes, which are used e.g. for the contacts on the front side of passivated emitter and rear cells (PERC). Modelling is based on the local phosphorus emitter doping profile and the local microstructure of the interface between metal contact and silicon surface, which is characterized during a quantitative microstructural analysis using the scanning electron microscope (SEM). By comparing the modelled j0,met to measured j0,met results determined at the same position of both, the microstructural analysis and emitter doping profile, we find that in most cases recombination is dominated by the etch back of the emitter by the glass frit rather than by penetration of crystallites into the doped region. However, for crystallites protruding deep into the emitter or rather up to the junction, recombination at the crystallites becomes significant as well. Our modelled results yield indications that the etch depth into the emitter doping profile by the glass frit contained in the metallization paste, is sensitive to the emitter doping profile itself.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Integrated Circuits and Semiconductor Failure Analysis · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. 2020
2. Metamodelling of numerical device simulations to rapidly create efficiency optimization roadmaps of monocrystalline silicon PERC cells
3. Analysis of the losses of industrial-type PERC solar cells
4. A roadmap toward 24% efficient PERC solar cells in industrial mass production10.1109/JPHOTOV.2017.2749007 ↗
5. Passivated emitter and rear cell—devices, technology, and modeling10.1063/5.0005090 ↗
6. Physical understanding of printed thick-film front contacts of crystalline Si solar cells—review of existing models and recent developments10.1016/j.solmat.2006.03.040 ↗
7. Silver thick-film contacts on highly doped n -type silicon emitters: structural and electronic properties of the interface10.1063/1.1562338 ↗
8. Current transport mechanism in printed AG thick film contacts to an n-type emitter of a crystalline silicon solar cell
9. Current transport in thick film Ag metallization: direct contacts at Silicon pyramid tips?10.1016/j.egypro.2011.06.179 ↗
10. Effect of Pb–Te–O glasses on Ag thick-film contact in crystalline silicon solar cells10.1016/j.solmat.2015.08.025 ↗
11. Two-dimensional modeling of the metallization-induced recombination losses of screen-printed solar cells10.1109/JPHOTOV.2014.2365453 ↗
12. Microscopic origin of the aluminium assisted spiking effects in n-type silicon solar cells10.1016/j.solmat.2014.05.036 ↗
13. Towards understanding the characteristics of Ag–Al spiking on boron-doped silicon for solar cells10.1016/j.solmat.2015.11.032 ↗
14. Numerical simulations of photoluminescence for the precise determination of emitter contact recombination parameters10.1109/JPHOTOV.2019.2938400 ↗
15. Spatially resolved determination of metallization-induced recombination losses using photoluminescence imaging10.1109/JPHOTOV.2020.3038336 ↗
16. Photoluminescence imaging of silicon wafers10.1063/1.2234747 ↗
17. Review and recent development in combining photoluminescence- and electroluminescence imaging with carrier lifetime measurements via modulated photoluminescence at variable temperatures
18. Kimmerle · 2015
19. Thermal donor formation and annihilation at temperatures above 500 °C in Czochralski-grown Si10.1063/1.368586 ↗
20. Doping profile Analysis in Si by electrochemical capacitance‐voltage measurements10.1149/1.2044101 ↗
21. Schubert · 2006
22. Insight into metal induced recombination losses and contact resistance in industrial silicon solar cells
23. The concept of skins for silicon solar cell modeling10.1016/j.solmat.2017.05.012 ↗
24. Numerical modeling of highly doped Si:P emitters based on Fermi–Dirac statistics and self-consistent material parameters10.1063/1.1501743 ↗
25. Comprehensive analysis of advanced solar cell contacts consisting of printed fine-line seed layers thickened by silver plating10.1002/pip.855 ↗
26. Simulating the interface morphology of silver thick film contacts on n-type Si-(100) and Si-(111)10.1063/1.4752228 ↗
27. Microscopic homogeneity of emitters formed on textured silicon using in-line diffusion and phosphoric acid as the dopant source10.1016/j.solmat.2008.11.061 ↗
28. Abnormal dopant distribution in $\hbox{POCl}3$-Diffused $\hbox{N}+$ emitter of textured silicon solar cells10.1109/LED.2010.2098840 ↗
29. Controllable growth of silver nanostructures by a simple replacement reaction and their SERS studies10.1016/j.solidstatesciences.2009.03.001 ↗
30. NIH Image to ImageJ: 25 years of image analysis10.1038/nmeth.2089 ↗
31. Hörteis · 2009
32. Mette · 2007