Effect of bismuth oxide on the thermal storage performance of carbonate/magnesium oxide composite
Source abstract
Abstract
Abstract As high temperature thermal energy storage materials, Na2CO3/MgO composites have been investigated extensively. However, theirs thermophysical properties, especially thermal conductivities, need improvements to satisfy the requirements for further efficiency in energy storage system. In this paper, Bi2O3 was tried and doped into the Na2CO3/MgO composites and the possible influence of Bi2O3 on the thermal properties of the composites was investigated for the first time. Our purpose is to achieve thermal performance optimization of these composites. Depending upon SEM, DSC techniques, a detailed analysis on possible relations between thermal properties, including both thermal enthalpy and conductivity, and sintering technique was carried out in this paper. The obtained results suggested that Bi2O3 is an effective additive, which can enhance thermal conductivities of the composites significantly. With the added amount of Bi2O3 as 1-3 wt%, the thermal conductivity value could be increased from 2 to 3.5 W/(m·K) with variety in enthalpy value controlled less than 5% for the sample prepared at 830–840 °C with the ratio of Na2CO3 to MgO as 50:50.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Thermal Expansion and Ionic Conductivity
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Preparation and characterization of CA-MA eutectic/silicon dioxide nanoscale composite phase change material from water glass via sol-gel method10.1007/s11595-017-1709-4 ↗
2. CaCl2·6H2O/Expanded graphite composite as form-stable phase change materials for thermal energy storage10.1007/s10973-013-3311-0 ↗
3. Recent developments in phase change materials for energy storage applications: a review10.1016/j.ijheatmasstransfer.2018.09.126 ↗
4. Thermal properties and thermal stability of the ternary eutectic salt NaCl-CaCl2-MgCl2 used in high-temperature thermal energy storage process10.1016/j.apenergy.2017.03.096 ↗
5. Fabrication of Al2O3-NaCl composite heat storage materials by one-step synthesis method10.1007/s11595-016-1473-x ↗
6. Assessment of a novel ternary eutectic chloride salt for next generation high-temperature sensible heat storage10.1016/j.enconman.2018.04.100 ↗
7. Eutectic composition-dependence of latent heat of binary carbonates (Na2CO3/Li2CO3)10.1016/j.solmat.2017.11.015 ↗
8. Composite salt/ceramic media for thermal energy storage applications
9. Thermal stability of Na2CO3-Li2CO3 as a high temperature phase change material for thermal energy storage10.1016/j.tca.2017.01.002 ↗
10. etc. Steam reforming of methane using double-walled reformer tubes containing high-temperature thermal storage Na2CO3/MgO composites for solar fuel production10.1016/j.energy.2014.01.107 ↗
11. Thermal conductivity improvement of liquid Nitrate and Carbonate salts doped with MgO particles10.1016/j.egypro.2017.12.064 ↗
12. The effect of humidity, impurities and initial state on the corrosion of carbon and stainless steels in molten HitecXL salt for CSP application10.1016/j.solmat.2017.08.026 ↗
13. Migration and phase change phenomena and characteristics of molten salt leaked into soil porous system10.1016/j.ijheatmasstransfer.2017.04.002 ↗
14. Corrosion resistance of HR3C to a carbonate molten salt for energy storage applications in CSP plants10.1016/j.solmat.2016.08.014 ↗
15. Latent thermal energy storage for solar process heat applications at medium-high temperatures - a review10.1016/j.solener.2018.06.101 ↗
16. A eutectic salt high temperature phase change material: thermal stability and corrosion of SS316 with respect to thermal cycling10.1016/j.solmat.2017.05.047 ↗
17. Preparation and characterization of sodium sulfate/silica composite as a shape-stabilized phase change material by sol-gel method10.1016/S1004-9541(14)60047-1 ↗
18. Carbonate salt based composite phase change materials for medium and high temperature thermal energy storage: a microstructural study10.1016/j.solmat.2019.03.035 ↗
19. Enhanced thermal properties of Li2CO3-Na2CO3–K2CO3 nanofluids with nanoalumina for heat transfer in high-temperature CSP systems10.1007/s10973-016-6050-1 ↗
20. Form-stable ternary carbonates/MgO composite material for high temperature thermal energy storage10.1016/j.solener.2019.01.002 ↗
21. High-temperature carbonate/MgO composite materials as thermal storage media for double-walled solar reformer tubes10.1016/j.solener.2008.05.011 ↗
22. Double-walled reformer tubes using high-temperature thermal storage of molten-salt/MgO composite for solar cavity-type reformer10.1016/j.ijhydene.2009.06.047 ↗
23. Multi-walled carbon nanotubes added to Na2CO3/MgO composites for thermal energy storage10.1016/j.partic.2013.05.001 ↗
24. Effects of MgO particle size and density on microstructure development of MgO based composite phase change materials10.1016/j.egypro.2019.01.759 ↗
25. Fabrication and characterization of the novel shape-stabilized composite PCMs of Na2CO3-K2CO3/MgO/glass10.1016/j.solener.2019.07.064 ↗
26. Thermal performance of a binary carbonate molten eutectic salt for high-temperature energy storage applications10.1016/j.apenergy.2019.114418 ↗
27. Li
28. Low-temperature sintering and microstructure evolution of Bi2O3-doped YSZ10.1016/j.ceramint.2017.10.039 ↗
29. Effects of Bi2O3 additive on sintering process and dielectric, ferroelectric, and piezoelectric properties of (Ba0.85Ca0.15)(Zr0.1Ti0.9)O3 lead-free piezo-ceramics10.1016/j.jeurceramsoc.2016.05.033 ↗
30. Thermal runaway, flash sintering and asymmetrical microstructural development of ZnO and ZnO–Bi2O3 under direct currents10.1016/j.actamat.2015.04.018 ↗
31. Low-temperature sintering and ferromagnetic properties of Li0.35Zn0.30Mn0.05Ti0.15Fe2.15O4 ferrites co-fired with Bi2O3-MgO mixture10.1016/j.jallcom.2019.05.102 ↗
32. Preparation, characterization and photocatalytic activity of Bi2O3-MgO composites10.1016/j.matchemphys.2010.09.013 ↗
33. Stacking faults modulation for scattering optimization in GeTe-based thermoelectric materials