journal article·2021-03

Pulsed rapid thermal process for tailoring the surface sulfurization of CIGSe thin film at low temperature

Jinlian Bi, Jianping Ao, Liyong Yao, Guozhong Sun, Wei Liu, Fangfang Liu, Wei Li, Yi Zhang

Publisher page

Abstract

Abstract Surface sulfurization is an effective way for CIGSe thin film to implement front graded bandgap. The controllable high S content with shallow diffusion depth into the film is key for the sulfurization. However, the degree of the sulfurization is closely related to the reaction temperature, thus it is difficult to control the diffusion depth of S into the CIGSe thin film effectively with high S content in such shallow depth. In this study, a pulsed sulfurization process is employed to realize a surface sulfurization as well as a high S content in a shallow diffusion depth of S into CIGSe at low substrate temperature, which provides an important way to fabricate double graded bandgap films prepared by post-selenization process. Structural analysis confirms the feasibility of the pulsed rapid thermal processing sulfurization. The device with surface sulfurization has the EA of N1 defects shifted to shallow position from 54 meV to 143 meV down to about 26 meV and 110 meV, respectively. The Voc, FF, and Jsc are improved obviously. Finally, the efficiency of CIGSSe thin film solar cell, based on the electrodeposition and selenization, increases by 20% with the improvement of Voc and FF.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. 2019
2. Time‐resolved investigation of Cu (In, Ga) Se2 growth and Ga gradient formation during fast selenisation of metallic precursors
3. Structure and properties of electrodeposited films and film stacks for precursors of chalcopyrite and kesterite solar cells10.1134/S1063782614040150 ↗
4. Cu(In,Ga)(S,Se)2 thin film solar cell with 10.7% conversion efficiency obtained by selenization of the Na-doped spray-pyrolyzed sulfide precursor film10.1021/am507684x ↗
5. Broussillou · 2015 · 1
6. Effects of heavy alkali elements in Cu(In,Ga)Se2 solar cells with efficiencies up to 22.6%10.1002/pssr.201600199 ↗
7. Progress in thin film CIGS photovoltaics Research and development, manufacturing, and applications10.1002/pip.2811 ↗
8. Bandgap optimization of submicron‐thick Cu(In,Ga)Se2 solar cells10.1002/pip.2543 ↗
9. Properties of Cu(In,Ga)Se2 solar cells with new record efficiencies up to 21.7%10.1002/pssr.201409520 ↗
10. A new approach to high-efficiency solar cells by band gap grading in Cu(In,Ga)Se2 chalcopyrite semiconductors10.1016/S0927-0248(00)00274-9 ↗
11. Impact of varied sulfur incorporation on the device performance of sequentially processed Cu(In,Ga)(Se,S)2 thin film solar cells10.1002/pssa.201228705 ↗
12. Enhancing photocurrent of Cu(In,Ga)Se2 solar cells with actively controlled Ga grading in the absorber layer10.1016/j.nanoen.2019.05.052 ↗
13. Pre-incorporation of Na into flexible Cu(In,Ga)Se2 thin film solar cells10.1016/j.solener.2018.08.048 ↗
14. Three-step vapor Se/N2/vapor Se reaction of electrodeposited Cu/In/Ga precursor for preparing CuInGaSe2 thin films10.1016/j.solmat.2016.09.026 ↗
15. Elemental redistributions at structural defects in Cu(In,Ga)Se2 thin films for solar cells
16. Gallium gradients in Cu(In,Ga)Se2 thin‐film solar cells10.1002/pip.2485 ↗
17. Solution-processed Cu(In,Ga)(S,Se)2 absorber yielding a 15.2% efficient solar cell10.1002/pip.1253 ↗
18. Surface engineering in Cu(In,Ga)Se2 solar cells10.1002/pip.1229 ↗
19. Three-step H2Se/Ar/H2S reaction of Cu-In-Ga precursors for controlled composition and adhesion of Cu (In, Ga)(Se, S)2 thin films10.1063/1.4704390 ↗
20. Ga homogenization by simultaneous H2Se/H2S reaction of Cu-Ga–In precursor10.1016/j.solmat.2010.04.050 ↗
21. Phases, morphology, and diffusion in CuInxGa1-xSe2 thin films10.1063/1.366122 ↗
22. Incongruent reaction of Cu(InGa) intermetallic precursors in H2Se and H2S10.1063/1.2787151 ↗
23. Properties of Cu(In,Ga)(S,Se)2 thin films prepared by selenization/sulfurization of metallic alloys10.1016/j.tsf.2006.12.055 ↗
24. Role of incorporated sulfur into the surface of Cu(InGa)Se2 thin-film absorber10.1016/S0927-0248(00)00288-9 ↗
25. Band gap engineering in polycrystalline Cu(In,Ga)(Se,S)2 chalcopyrite thin films10.1016/j.mseb.2003.10.109 ↗
26. Optical functions and electronic structure of CuInSe2, CuGaSe2,CuInS2, and CuGa210.1103/PhysRevB.63.075203 ↗
27. Structural regulation of electrochemically deposited copper layers for fabrication of thin film solar cells with a CuInS2 photoabsorber10.1016/j.jnoncrysol.2011.12.043 ↗
28. Predicted reaction paths for the formation of multinary chalcopyrite compounds10.1002/pssa.200669561 ↗
29. Impacts of surface sulfurization on Cu(In1-x,Gax)Se2 thin‐film solar cells10.1002/pip.2554 ↗
30. High photo-conversion efficiency in double-graded Cu(In,Ga)(S,Se)2 thin film solar cells with two‐step sulfurization post‐treatment10.1002/pip.2833 ↗
31. Adjusting the Ga grading during fast atmospheric processing of Cu(In,Ga)Se2 solar cell absorber layers using elemental selenium vapor10.1002/pip.2865 ↗
32. Composition and bandgap control in Cu(In,Ga)Se2-based absorbers formed by reaction of metal precursors
33. Band gap optimization in Cu(In1-xGax)(Se1-ySy)2 by controlled Ga and S incorporation during reaction of Cu-(In,Ga) intermetallics in H2Se and H2S10.1016/j.tsf.2008.10.127 ↗
34. Advanced characterization of electrodeposition-based high efficiency solar cells: non-destructive Raman scattering quantitative assessment of the anion chemical composition in Cu(In,Ga)(S,Se)2 absorbers10.1016/j.solmat.2015.06.056 ↗
35. Process monitoring of chalcopyrite photovoltaic technologies by Raman spectroscopy: an application to low cost electrodeposition based processes10.1039/C0NJ00794C ↗
36. Studies on sulfur diffusion into Cu(In,Ga)Se2 thin films10.1002/(SICI)1099-159X(200003/04)8:2<227::AID-PIP308>3.0.CO;2-G ↗
37. Composition dependence of defect energies and band alignments in the Cu(In1-xGax)(Se1-ySy)2 alloy system10.1063/1.1432126 ↗
38. Influence of the Ga-content on the bulk defect densities of Cu(In,Ga)Se210.1016/S0040-6090(00)01710-7 ↗
39. A temporary barrier effect of the alloy layer during selenization: tailoring the thickness of MoSe2 for efficient Cu2ZnSnSe4 solar cells10.1002/aenm.201402178 ↗