journal article·2020-01Open access

Efficiency gain in plated bifacial n-type PERT cells by means of a selective emitter approach using selective epitaxy

María Recamán Payo, Yuandong Li, Richard Russell, Sukhvinder Singh, Izabela Kuzma Filipek, Filip Duerinckx, Jozef Szlufcik, Jef Poortmans

Abstract

Abstract This work evaluates the potential of selective epitaxy to mitigate the recombination losses at the p-type contact regions of plated bifacial n-type PERT cells. Following the growth of a 500 nm, 2.5 1019 cm−3 boron doped epitaxial layer at the emitter contact regions defined by laser ablation of the passivating dielectrics, both an increase in Voc (+6 mV) and FF (+1% absolute) are measured in the final cells compared to the reference with a homogeneous diffused emitter. These results come with an average efficiency gain of 0.3 and 0.5% absolute for front and rear side illumination, respectively. If the diffused, blanket emitter in the passivated regions is replaced by a thicker, lowly doped epitaxial profile (3 μm, 5 1018 cm−3) to further reduce recombination, an additional rise in implied Voc after metallization of 10 mV is estimated. This increase would be the result of a reduction in J0,pass, emitter (down to 6 fA/cm2) and J0,plated, emitter (down to 1967 fA/cm2).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Integrated Circuits and Semiconductor Failure Analysis · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Simultaneous fabrication of n & p contacts for bifacial cells by a novel co-plating process
2. Feldmann · 2015
3. High-efficiency n-type HP mc silicon solar cells10.1109/JPHOTOV.2017.2714139 ↗
4. Evaluation of TOPCon technology on large area solar cells
5. BBr3 emitter passivation by ultra-thin boron doped LPCVD polysilicon layers
6. Industrial, screen-printed double-side contacted POLO cells
7. n-Type Si solar cells with passivating electron contact: identifying sources for efficiency limitations by wafer thickness and resistivity variation10.1016/j.solmat.2017.05.042 ↗
8. Material properties of LPCVD processed n-type poly-Si passivating contacts and application in PERpoly industrial bifacial solar cells10.1016/j.egypro.2017.09.250 ↗
9. Laser contact openings for local poly-Si-metal contacts enabling 26.1%–efficient POLO–IBC solar cells10.1016/j.solmat.2018.06.020 ↗
10. Passivating contacts for crystalline silicon solar cells: from concepts and materials to prospects10.1109/JPHOTOV.2018.2797106 ↗
11. Ion implantation for poly-Si passivated back-junction back-contacted solar cells10.1109/JPHOTOV.2014.2382975 ↗
12. Dopant diffusion from p+-poly-Si into c-Si during thermal annealing
13. In-situ doping and local overcompensation of high performance LPCVD polysilicon passivated contacts as approach to industrial IBC cells10.1016/j.egypro.2016.07.123 ↗
14. Passivating contacts for silicon solar cells based on boron-diffused recrystallized amorphous silicon and thin dielectric interlayers10.1016/j.solmat.2016.03.033 ↗
15. On the recombination behavior of p+-type polysilicon on oxide junctions deposited by different methods on textured and planar surfaces10.1002/pssa.201700058 ↗
16. Junction resistivity of carrier-selective polysilicon on oxide junctions and its impact on solar cell performance10.1109/JPHOTOV.2016.2614123 ↗
17. Study of screen printed metallization for polysilicon based passivating contacts10.1016/j.egypro.2017.09.242 ↗
18. Screen-printed metallization for p-type poly-Si passivated contacts formed by LPCVD
19. Silicon solar cells by "DESIJN" (deposited silicon junctions)
20. Front/back poly-Si/SiO2 passivated contact device with Voc >720 mV
21. Recamán Payo, M. et al. Method for Forming Patterns of Differently Doped Regions. Patent WO 2013/020868 A1.
22. Boron-doped selective silicon epitaxy: high efficiency and process simplification in interdigitated back contact cells10.1002/pip.2427 ↗
23. Opportunities for silicon epitaxy in bulk crystalline silicon photovoltaics
24. Advanced doping profiles by selective epitaxy in n-type PERT cells
25. Process simplification and improvement of rear side of IBC cells by means of PECVD SiOx and epitaxy
26. Integration processes for nPERT Si solar cells using single-side emitter epitaxy and front side laser doping10.1016/j.egypro.2015.07.075 ↗
27. The use of silicon epitaxy in advanced n-type PERT and IBC silicon solar cell designs
28. Recamán Payo, M. et al. Method for Fabricating Crystalline Photovoltaic Cells. Patent US 2016/072001 A1.
29. Optical and electrical performance of rear side epitaxial emitters for bifacial silicon solar cell application10.1016/j.solmat.2019.01.051 ↗
30. Investigation of laser ablation induced defects in crystalline silicon solar cells10.1016/j.egypro.2014.08.040 ↗
31. Characterization of Al2O3 thin films prepared by thermal ALD10.1016/j.egypro.2015.07.080 ↗
32. Comparison of the thermal stability of single Al2O3 layers and Al2O3/SiNx stacks for the surface passivation of silicon10.1016/j.egypro.2011.06.141 ↗
33. Status and prospects of Al2O3-based surface passivation schemes for silicon solar cells10.1116/1.4728205 ↗
34. Thermally induced damages of PECVD SiNx thin films10.1557/jmr.2011.236 ↗
35. Russell, R. Methods for Forming Metal Electrodes on Silicon Surfaces of Opposite Polarity. Patent WO 2016/193409 A1.
36. Measurement of the emitter saturation current by a contactless photoconductivity decay method
37. Improved quantitative description of Auger recombination in crystalline silicon10.1103/PhysRevB.86.165202 ↗
38. Injection dependent emitter saturation current density measurement under metallized areas using photoconductance decay
39. Excess carrier density variations in test structures for photoconductance-based contact recombination current measurements10.1109/JPHOTOV.2015.2397594 ↗
40. Shockley Research Laboratory · 1964
41. Obtaining the specific contact resistance from transmission line model measurements10.1109/EDL.1982.25502 ↗
42. Contact resistance and methods for its determination10.1016/0040-6090(83)90577-1 ↗
43. Contact resistance and Schottky barriers
44. Selective epitaxy as contact passivation approach in bifacial n-type PERT solar cells
45. Duerinckx · 1999
46. PECVD SiNx induced hydrogen passivation in string ribbon silicon
47. 'Just-clean-enough': optimization of wet chemical cleaning processes for crystalline silicon solar cells10.4028/www.scientific.net/SSP.255.344 ↗
48. Co-optimisation of the emitter region and the metal grid of silicon solar cells10.1002/1099-159X(200011/12)8:6<603::AID-PIP333>3.0.CO;2-M ↗
49. Phosphorus emitter and metal-grid optimization for homogeneous (n+p) and double-diffused (n++n+p) emitter silicon solar cells10.1590/S1516-14392009000100006 ↗