Anodic oxidations: Excellent process durability and surface passivation for high efficiency silicon solar cells
Source abstract
Abstract
We investigate the versatility of anodically grown silicon dioxide (SiO2) films in the context of process durability and exceptional surface passivation for high efficiency (>23%) silicon solar cell architectures. We show that a room temperature anodic oxidation can achieve a thickness of ~70 nm within ~30 min, comparable to the growth rate of a thermal oxide at 1000 °C. We demonstrate that anodic SiO2 films can mask against wet chemical silicon etching and high temperature phosphorus diffusions, thereby permitting a low thermal budget method to form patterned structures. We investigate the saturation current density J0 of anodic SiO2/silicon nitride stacks on phosphorus diffused and undiffused silicon and show that a J0 of <10 fA cm−2 can be achieved in both cases. Finally, to showcase the anodic SiO2 films on a device level, we employed the anodic SiO2/silicon nitride stack to passivate the rear surface of an interdigitated back contact solar cell, achieving an efficiency of 23.8%.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Integrated Circuits and Semiconductor Failure Analysis · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Injection-level dependent recombination velocities at the Si−SiO2 interface for various dopant concentrations10.1063/1.356399 ↗
2. Very low bulk and surface recombination in oxidized silicon wafers10.1088/0268-1242/17/1/306 ↗
3. Etch rates for micromachining processing-Part II10.1109/JMEMS.2003.820936 ↗
4. Nicollian · 1982
5. Potential induced degradation of solar cells and panels
6. SiO2 surface passivation layers – a key technology for silicon solar cells10.1016/j.solmat.2018.04.029 ↗
7. A review on low temperature chemically formed silicon dioxide for solar cell applications
8. Tunnel oxides formed by field-induced anodisation for passivated contacts of silicon solar cells10.3390/coatings8020081 ↗
9. Low surface recombination velocity on (100) silicon by electrochemically grown silicon dioxide annealed at low temperature10.1109/LED.2010.2052780 ↗
10. Zhang · 2001
11. Anodic formation of oxide films on silicon10.1149/1.2428542 ↗
12. Silicon surface passivation by anodic oxidation annealed at 400°C10.1149/2.009402jss ↗
13. Low surface recombination velocities achieved by silicon dioxide grown electrochemically in nitric acid
14. Defects at the Si/SiO2 interface: their nature and behaviour in technological processes and stress10.1016/0168-9002(96)00205-7 ↗
15. Effective surface passivation of p-type crystalline silicon with silicon oxides formed by light-induced anodisation10.1016/j.apsusc.2014.08.028 ↗
16. Light-induced anodisation of silicon for solar cell passivation10.1063/1.4829701 ↗
17. High-level silicon surface passivation by anodically grown silicon dioxide and silicon nitride stacks10.1109/JPHOTOV.2015.2422577 ↗
18. The evolution of silicon wafer cleaning technology10.1149/1.2086825 ↗
19. A chemical/microwave technique for the measurement of bulk minority carrier lifetime in silicon wafers10.1149/1.2095849 ↗
20. Photoluminescence imaging of silicon wafers10.1063/1.2234747 ↗
21. Inter-laboratory study of eddy-current measurement of excess-carrier recombination lifetime10.1109/JPHOTOV.2013.2284375 ↗
22. Lehmann · 2002
23. Theoretical model of the anodic oxidation growth kinetics of Si at constant voltage10.1149/1.2096759 ↗
24. Grant · 2012
25. The concept of Fermi level pinning at semiconductor/liquid junctions. Consequences for energy conversion efficiency and selection of useful solution redox couples in solar devices10.1021/ja00531a001 ↗
26. Design, fabrication and characterisation of a 24.4% efficient interdigitated back contact solar cell10.1002/pip.2556 ↗
27. Measurement of the emitter saturation current by a contactless photoconductivity decay method
28. On effective surface recombination parameters10.1063/1.4886595 ↗
29. Light enhanced hydrofluoric acid passivation: a sensitive technique for detecting bulk silicon defects
30. Evaluation of the bulk lifetime of silicon wafers by immersion in hydrofluoric acid and illumination10.1149/2.003202jss ↗
31. A freeware 1D emitter model for silicon solar cells
32. Improved quantitative description of Auger recombination in crystalline silicon10.1103/PhysRevB.86.165202 ↗
33. Taking monocrystalline silicon to the ultimate lifetime limit10.1016/j.solmat.2018.05.040 ↗
34. Exceptional silicon surface passivation by an ONO dielectric stack10.1016/j.solmat.2018.05.061 ↗
35. Thermal activation and deactivation of grown-in defects limiting the lifetime of float-zone silicon10.1002/pssr.201600080 ↗
36. Permanent annihilation of thermally activated defects which limit the lifetime of float-zone silicon10.1002/pssa.201600360 ↗
37. Minimising bulk lifetime degradation during the processing of interdigitated back contact silicon solar cells10.1002/pip.2928 ↗
38. Optical loss analysis of PV modules
39. Fell · 2013 · vol. 60 · 733