journal article·2019-02

Phase stability and structural comparison of phases in the Cu-Zn-Sn-S system using solid-state NMR

Elizabeth A. Pogue, Andre Sutrisno, Nicole E. Johnson, Melissa B. Goetter, Zhelong Jiang, Nicole E. Johnson, Daniel P. Shoemaker, Angus A. Rockett

Publisher page

Abstract

Abstract Phases in the Cu-Zn-Sn-S system are of interest to the solar and thermoelectrics communities because all elements are earth-abundant and non-toxic. A better understanding of the structures of these phases and the equilibria between them is necessary to guide device manufacturers. This work reviews all the phases reported in this system and reports which phases form and are stable at 200 °C and 400 °C. In this work, the stable phases in the Cu-Zn-Sn-S system ( Cu 4 Sn 7 S 16 , Cu 4 SnS 4 , Cu 2 ZnSnS 4 , and Cu 2 SnS 3 ) are synthesized and their structures are investigated using solid-state NMR, X-ray diffraction, and Raman spectroscopy. The existing Cu-Sn-S and Cu-Zn-Sn-S phase diagrams are revised based on our synthesis results. Cu 3 SnS 4 and Cu 2 ZnSn 3 S 8 are removed from the quaternary and ternary phase diagrams because we did not observe either phase. Prior reports (in thin films and nanocrystals) of Cu 3 SnS 4 may be related to trace amounts of In or large surface areas. Monoclinic Cu 2 SnS 3 is not stable at 400 °C and, at this temperature, a disordered tetragonal phase is stable. At lower temperatures (room-temperature and 200 °C ), this same (disordered) tetragonal phase is stable at compositions that are Cu-rich and Sn-poor from Cu 2 SnS 3 . Cu 4 SnS 6 was added to the phase diagram at 400 °C. Significant differences in reaction rate when forming Cu 4 SnS 4 from either elemental or binary sulfide precursors are noted and explained. The NMR results are generalized to aid in distinguishing octahedral versus tetrahedral Sn4+ coordinations.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Advanced Thermoelectric Materials and Devices · Phase-change materials and chalcogenides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. Secondary phase formation during monoclinic Cu2SnS3 growth for solar cell application10.1016/j.solmat.2016.04.039 ↗
2. Cu2SnS thin-film solar cells fabricated by sulfurization from NaF/Cu/Sn stacked precursor10.7567/APEX.8.042303 ↗
3. Fabrication of Cu2SnS3 thin-film solar cells with power conversion efficiency of over 4%10.7567/JJAP.54.08KC06 ↗
4. Synthesis and optimized sulfurization time of Cu2SnS3 thin films obtained from stacked metallic precursors for solar cell application10.1016/j.matlet.2015.08.028 ↗
5. Eco-friendly p-type Cu2SnS3 thermoelectric material: crystal structure and transport properties10.1038/srep32501 ↗
6. Crystal structure, electronic structure and thermoelectric properties of Cu4Sn7S1610.1016/j.jallcom.2005.09.030 ↗
7. Effects of disorder on carrier transport in Cu2SnS310.1103/PhysRevApplied.4.044017 ↗
8. Stability of naturally relevant ternary phases in the Cu-Sn-S system in contact with an aqueous solution10.3390/min6030079 ↗
9. The relatives of stannite in the light of new data
10. Phase equilibria in the Cu2S-ZnS-SnS2 system10.1016/j.jallcom.2003.08.084 ↗
11. Phase relations and optical properties of semiconducting ternary sulfides in the system Cu-Sn-S10.1016/S0022-3697(03)00172-0 ↗
12. Copper-tin sulphides in the system Cu-Sn-S10.1180/minmag.1986.050.356.20 ↗
13. Discrimination and detection limits of secondary phases in Cu2ZnSnS4 using X-ray diffraction and Raman spectroscopy10.1016/j.tsf.2014.08.028 ↗
14. J.J. Scragg, Copper Zinc Tin Sulfide Thin Films for Photovoltaics, Ph.d, University of Bath, UK (2011).10.1007/978-3-642-22919-0 ↗
15. E. Pogue, A. Rockett, Phase stability of Cu2ZnSnS4-SnS2 interfaces: Cu2ZnSn3S8. in: Proceedings of the 43rd Photovoltaic Specialist Conference (PVSC), IEEE Portland, 2016, pp. 0471–0475.10.1109/PVSC.2016.7749638 ↗
16. A new phase in the Cu-Sn-Zn-S photovoltaic system10.1016/j.matlet.2015.01.048 ↗
17. Raman analysis of monoclinic Cu2SnS3 thin films10.1063/1.4712623 ↗
18. The role of secondary phase precipitation on grain boundary electrical activity in Cu2ZnSnS4 (CZTS) photovoltaic absorber layer material10.1063/1.4769738 ↗
19. Structure cristalline du sulfure de cuivre et detain CuSn3.75S810.1107/S0567740882002027 ↗
20. Baranowski · 2015
21. Identifying short-range disorder in crystalline bulk Cu2SnS3 phases: a solid-state NMR investigation10.1021/acs.chemmater.8b01182 ↗
22. A low-temperature order-disorder transition in Cu2ZnSnS4 thin films10.1063/1.4863685 ↗
23. Solid-state NMR and Raman spectroscopy to address the local structure of defects and the tricky issue of the Cu/Zn disorder in Cu-poor, Zn-rich CZTS materials10.1021/ic5012346 ↗
24. CASINO V2.42-A fast and easy-to-use modeling tool for scanning electron microscopy and microanalysis users10.1002/sca.20000 ↗
25. K. Eichele, WSolids1: Solid-state NMR Spectrum Simulation Version 1.21.3 (2015).
26. Modelling one- and two-dimensional solid-state NMR spectra10.1002/mrc.984 ↗
27. Haeberlen · 1976
28. Multinuclear (67Zn, 119Sn and 65Cu) NMR spectroscopy-an ideal technique to probe the cationic ordering in Cu2ZnSnS4 photovoltaic materials10.1039/c3cp51320c ↗
29. Band tailing and efficiency limitation in kesterite solar cells10.1063/1.4820250 ↗
30. Copper(II) sulfide?10.1016/j.mineng.2005.09.003 ↗
31. CaCu2O3 a nonstoichiometric compound: structural disorder and magnetic properties10.1016/S0025-5408(01)00656-0 ↗
32. Substitutional disorder in the system Mg1−xCu2+xO3:cu2+ in a compressed octahedral environment
33. Synthesis and crystal structure of Mg1−xCu2+xO3 (0.130≤x≤0.166)10.1006/jssc.2001.9233 ↗
34. A study of ternary Cu2SnS3 and Cu3SnS4 thin films prepared by sulfurizing stacked metal precursors10.1088/0022-3727/43/21/215403 ↗
35. Occurrence of sulphides on the bornite-idaite join from Vielsalm, Stavelot Massif, Belgium10.1127/0935-1221/2003/0015-1063 ↗
36. Preparation of monoclinic Cu2SnS3 single crystal by chemical vapor transport with iodine10.1016/j.matlet.2016.02.039 ↗
37. A review of defects and disorder in multinary tetrahedrally bonded semiconductors10.1088/0268-1242/31/12/123004 ↗
38. U. Chalapathi, Y.B. Kishore Kumar, S. Uthanna, V.S. Raja, Growth and characterization of Cu3SnS4 thin films by spray pyrolysis, in: Proceedings of the AIP Conference Proceedings, Vol. 1447, American Institute of Physics, 2012, pp. 649–650.10.1063/1.4710170 ↗
39. Kuramite Cu3SnS4 and mohite Cu2SnS3 nanoplatelet synthesis using covellite CuS templates with Sn(II) and Sn(IV) sources10.1021/acs.chemmater.6b05428 ↗
40. Raman scattering study of Cu3SnS4 colloidal nanocrystals10.1021/jp509035f ↗
41. Extended antisite defects in tetrahedrally bonded semiconductors10.1103/PhysRevB.92.201204 ↗
42. Entropy-driven clustering in tetrahedrally bonded multinary materials10.1103/PhysRevApplied.3.034007 ↗
43. Kuramite, Cu3SnS4, a new mineral of the stannite group10.1080/00206818109455070 ↗
44. A hybrid functional study of native point defects in Cu2SnS3: implications for reducing carrier recombination10.1039/C7CP06891C ↗
45. Phase stability of the Cu-Sn-S system and optimal growth conditions for earth-abundant Cu2SnS3 solar materials10.1016/j.solener.2017.07.017 ↗
46. Crystal structure and physical properties of ternary phases around the composition Cu5Sn2Se7 with tetrahedral coordination of atoms10.1021/cm501899q ↗
47. New insights into the structure, chemistry, and properties of Cu4SnS410.1016/j.jssc.2017.05.033 ↗
48. High temperature saturated vapour pressure of sulphur and the estimation of its critical quantities10.1016/S0021-9614(73)80089-8 ↗
49. Control of doping in Cu2SnS3 through defects and alloying10.1021/cm501339v ↗
50. The phase equilibria in the quasi-ternary Cu2S-CdS-SnS2 system10.1016/S0925-8388(98)00656-2 ↗
51. Reaction kinetics of Cu2−xS, ZnS, and SnS2 studied using differential scanning calorimetry10.1557/adv.2017.384 ↗
52. Cuivre-Etain-Soufre Cu4SnS4, Acta Crystallogr., Sect. B: struct. Sci
53. Structural dependence of quadrupole coupling constant e2qQ/h for 27Al and crystal field parameter D for Fe3+ in aluminosilicates
54. Oxygen-induced ordering in bulk polycrystalline Cu2ZnSnS4 by Sn removal10.1021/acs.inorgchem.7b01777 ↗
55. The materials project: a materials genome approach to accelerating materials innovation10.1063/1.4812323 ↗
56. Etude du ternaire Cu-Sn-S. Diagrammes dequilibre des systemes Cu2S-SnS, Cu2S-Sn2S3 et Cu2S-SnS2, etude crystallographique des composes Cu4SnS4, Cu2SnS3, Cu2Sn4S9, et Cu4Sn3S8
57. Synthesis, electrical conductivity, and crystal structure of Cu4Sn7S16 and structure refinement of Cu2SnS310.1006/jssc.1998.7822 ↗
58. Low thermal conductivity in ternary Cu4Sn7S16 compound10.1016/j.actamat.2015.06.046 ↗
59. In air synthesis of SnS2 nanoplates from tin, sulfur and ammonium chloride powders10.1016/j.matchemphys.2008.07.119 ↗
60. Preparation, crystal structure and electrical properties of Cu4SnS610.1016/S0025-5408(99)00013-6 ↗
61. The crystallisation of Cu2ZnSnS4 thin film solar cell absorbers from co-electroplated Cu-Zn-Sn precursors10.1016/j.tsf.2008.11.019 ↗
62. The constitution of aqueous tin(IV) chloride and bromide solutions and solvent extracts studied by 119Sn NMR and vibrational spectroscopy10.1016/S0277-5387(00)83148-4 ↗
63. Sn119 nuclear magnetic resonance spectra10.1021/ja01463a016 ↗