Significantly different mechanical properties and interfacial structures of Cu2ZnSn(S,Se)4 films prepared from metallic and sulfur-contained precursors
Source abstract
Abstract
Abstract To fill in the gap of experimental studies on the adhesion and mechanical properties of Cu 2 ZnSn(S,Se) 4 (CZTSSe) films, mechanical measurements such as nano-indentation and scratch were performed on CZTSSe films prepared from metallic and partially sulfurized precursors on Mo substrates. Surprisingly and interestingly, obviously better film adhesion and elastic modulus values close to the theoretical predictions were achieved in the sample prepared using sulfur contained precursors, in comparison with the samples prepared using metallic precursors. Detailed characterization and analysis reveal that this better performance is attributed to a significantly improved CZTSSe/Mo interface when sulfur contained precursors are used. Mechanisms of the impacts of sulfur incorporation on the adhesion and mechanical properties of CZTSSe films and the suppression of the growth of unwanted Mo(S,Se) 2 are analyzed and discussed, for potentially benefiting device performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Semiconductor materials and interfaces · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Compositional dependence of structural and electronic properties of Cu2ZnSn(S,Se)4 alloys for thin film solar cells10.1103/PhysRevB.83.125201 ↗
2. Photoluminescence and Raman study of Cu2ZnSn(SexS1−x)4 monograins for photovoltaic applications10.1016/j.tsf.2010.12.099 ↗
3. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
4. On the formation mechanisms of Zn-rich Cu2ZnSnS4 films prepared by sulfurization of metallic stacks10.1016/j.solmat.2013.01.015 ↗
5. Temperature dependent conductivity of polycrystalline Cu2ZnSnS4 thin films10.1063/1.4731875 ↗
6. Optical characterization of Cu2ZnSnSe4 grown by thermal co-evaporation10.1016/j.tsf.2011.01.142 ↗
7. Study on phase formation mechanism of non- and near-stoichiometric Cu2ZnSn(S,Se)4 film prepared by selenization of Cu–Sn–Zn–S precursors10.1021/cm403423e ↗
8. Structural, energetic and elastic properties of Cu2ZnSn(SxSe1−x)4 (x=1, 0.75, 0.5, 0.25, 0) alloys from first-principles computations,10.1016/j.solener.2014.01.015 ↗
9. Characterization of vibrational and mechanical properties of quaternary compounds Cu2ZnSnS4 and Cu2ZnSnSe4 in kesterite and stannite structures10.1103/PhysRevB.84.205201 ↗
10. A detrimental reaction at the molybdenum back contact in Cu2ZnSn (S, Se)4 thin-film solar cells10.1021/ja308862n ↗
11. On the kinetics of MoSe2 interfacial layer formation in chalcogen-based thin film solar cells with a molybdenum back contact10.1063/1.4794422 ↗
12. Thermally evaporated Cu2ZnSnS4 solar cells10.1063/1.3499284 ↗
13. Enhancing the Cu2ZnSnS4 solar cell efficiency by back contact modification: inserting a thin TiB2 intermediate layer at Cu2ZnSnS4/Mo interface10.1063/1.4863736 ↗
14. Inhibiting the absorber/Mo-back contact decomposition reaction in Cu2ZnSnSe4 solar cells: the role of a ZnO intermediate nanolayer10.1039/c3ta11419h ↗
15. Control of an interfacial MoSe2 layer in Cu2ZnSnSe4 thin film solar cells: 8.9% power conversion efficiency with a TiN diffusion barrier10.1063/1.4740276 ↗
16. Characterization of Cu2ZnSnS4 thin films prepared by vapor phase sulfurization10.1143/JJAP.40.500 ↗
17. Influence of precursor sulfur content on film formation and compositional changes in Cu2ZnSnS4 films and solar cells10.1016/j.solmat.2011.10.019 ↗
18. Investigating the role of grain boundaries in CZTS and CZTSSe thin film solar cells with scanning probe microscopy10.1002/adma.201103470 ↗
19. Phase composition of selenized Cu2ZnSnSe4 thin films determined by X-ray diffraction and Raman spectroscopy10.1016/j.tsf.2011.01.388 ↗
20. Calculation of the lattice dynamics and Raman spectra of copper zinc tin chalcogenides and comparison to experiments10.1063/1.4704191 ↗
21. Elastic and optical properties of Cu2ZnSn(SexS1 −x)4 alloys: density functional calculations10.1088/0268-1242/27/11/115001 ↗
22. Composition dependence of structure and optical properties of Cu2ZnSn(S,Se)4 solid solutions: an experimental study10.1016/j.jallcom.2011.08.099 ↗
23. Failure mode maps in the thin film scratch adhesion test10.1016/S0301-679X(97)00012-1 ↗
24. Fischer-Cripps · 2011
25. CuIn(Ga)Se2-based devices via a novel absorber formation process10.1016/S0927-0248(00)00066-0 ↗
26. Development of thin-film Cu(In,Ga)Se2 and CdTe solar cells10.1002/pip.527 ↗
27. A review of nanoindentation continuous stiffness measurement technique and its applications10.1016/S1044-5803(02)00192-4 ↗
28. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology10.1557/jmr.2004.19.1.3 ↗