journal article·2023-01

High performance inorganic all-solid-state electrochromic devices based on Si3N4 ion conducting layer

Jiuyong Li, Youxiu Wei, Weiming Liu, Junjie Luo, Yue Yan

Publisher page

Abstract

In electrochromic devices (ECDs), ion conducting layer has the vital function of conducting ions and blocking electrons. However, the limited electron blocking ability and preparation technology of conventional ion conducting materials hinder the commercial application of all-solid-state ECDs. In this work, a novel ion conducting material Si 3N 4 film was deposited by pulsed direct current (p-DC) reactive magnetron sputtering with a Si target, and shows promising potential due to its ultrahigh transparency, anti-reflection effect and remarkable electron blocking ability. An ECD with the structure of glass/ITO/WO 3/Li/Si 3N 4/NiO/ITO has been fabricated by magnetron sputtering, in which Si 3N 4 film was used as ion conducting layer for the first time. The ECD presents much less leakage current density (<35 μA cm −2), large optical transmittance modulation (72.3% at 625 nm), fast response (1.3 s for bleaching and 13.1 s for coloring), high coloration efficiency (94.46 cm 2 C −1) and excellent cycle stability (91.4% retention of the maximum optical modulation after 10,000 cycles). This work not only demonstrates the great prospect of Si 3N 4 film as an ion conducting layer in ECDs, but also provides a new idea in the selection of ion conducting materials for developing high-performance inorganic all-solid-state ECDs.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Transition Metal Oxide Nanomaterials · Ga2O3 and related materials · Gas Sensing Nanomaterials and Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Electrochromic properties and performance of NiOx films and their corresponding all-thin-film flexible devices preparedby reactive DC magnetron sputtering10.1016/j.apsusc.2016.04.154 ↗
2. Tantalum oxide film deposited by vacuum cathodic arc plasma with improved electrochromic performance10.1016/j.solmat.2018.02.034 ↗
3. High performance and excellent stability of all-solid-state electrochromic devices based on a Li1.85AlOz ion conducting layer10.1021/acssuschemeng.9b04501 ↗
4. Electrochromics for smart windows: oxide-based thin films and devices10.1016/j.tsf.2014.02.002 ↗
5. Properties, requirements and possibilities of smart windows for dynamic daylight and solar energy control in buildings: a state-of-the-art review10.1016/j.solmat.2009.08.021 ↗
6. Lithiation of WO3 films by evaporation method for all-solid-state electrochromic devices10.1016/j.electacta.2020.136817 ↗
7. Enhanced electrochromic performance on anodic nickel oxide inorganic device via lithium and aluminum co-doping10.1016/j.jallcom.2019.153365 ↗
8. All solid state electrochromic devices based on the LiF electrolyte10.1039/D0CC00697A ↗
9. Charge-transfer kinetics and cyclic properties of inorganic all-solid-state electrochromic device with remarkably improved optical memory10.1016/j.solmat.2017.09.012 ↗
10. Influence of cycling temperature on the electrochromic properties of WO3//NiO devices built with various thicknesses10.1016/j.solmat.2017.05.070 ↗
11. Life-cycling and uncovering cation-trapping evidence of a monolithic inorganic electrochromic device: glass/ITO/WO3/LiTaO3/NiO/ITO10.1039/C8NR02267D ↗
12. Electrochemical studies of silicon nitride electron blocking layer for all-solid-state inorganic electrochromic device10.1016/j.electacta.2017.08.177 ↗
13. Reactively sputtered Ta2O5 solid electrolyte layers in all thin film electrochromic devices10.1016/j.jallcom.2021.158931 ↗
14. Tantalum oxide film prepared by reactive magnetron sputtering deposition for all-solid-state electrochromic device10.1016/j.tsf.2011.08.046 ↗
15. Studies of ZrO2 electrolyte thin-film thickness on the all-solid thin-film electrochromic devices10.1007/s10008-014-2600-2 ↗
16. Mechanical and electrical properties of DC magnetron sputter deposited amorphous silicon nitride thin films10.1016/j.tsf.2015.05.028 ↗
17. Silicon nitride and related materials10.1111/j.1151-2916.2000.tb01182.x ↗
18. Broadband anti-reflection coating using dielectric Si3N4 nanostructures. Application to amorphous-Si-H solar cells10.1016/j.optcom.2016.12.062 ↗
19. 1990
20. Efficiency of Li doping on electrochromic WO3 thin films10.1016/S0040-6090(00)01424-3 ↗
21. Hole doping in Al-containing nickel oxide materials to improve electrochromic performance10.1021/am302097b ↗
22. Electro-optical performance of inorganic monolithic electrochromic device with a pulsed DC sputtered LixMgyN ion conductor10.1007/s10008-017-3742-9 ↗
23. Electron transfer governed crystal transformation of tungsten trioxide upon Li ions intercalation10.1021/acsami.6b06581 ↗
24. Nickel vacancy behavior in the electrical conductance of nonstoichiometric nickel oxide film10.1063/1.4742993 ↗
25. In-situ transmission electron microscopy imaging of formation and evolution of LixWO3 during lithiation of WO3 nanowires10.1063/1.4950968 ↗
26. Analysis of the kinetics of ion intercalation: ion trapping approach to solid-state relaxation processes10.1016/S0013-4686(02)00102-0 ↗
27. Sputtered Si3N4 and SiO2 electron barrier layer between a redox electrolyte and the WO3 film in electrochromic devices10.1016/j.solmat.2016.08.023 ↗