journal article·2022-10

Maskless interdigitated a-Si:H PECVD process on full M0 c-Si wafer: Homogeneity and passivation assessment

Karim Ouaras, Sergej Filonovich, Bastien Bruneau, Junkang Wang, Monalisa Ghosh, Erik Johnson

Publisher page

Abstract

In this work, the use of a novel, large area, mask-less and contact-less patterning technique is demonstrated for the first time, showing the localized deposition of hydrogenated amorphous silicon (a-Si:H) in a desired pattern over the full surface of an M0 (156 mm × 156 mm) solar wafer. The patterning functionality is achieved through a custom-designed RF electrode possessing a series of “slits” and placed in close proximity to the substrate in a plasma enhanced chemical vapor deposition (PECVD) chamber. Under a certain set of process conditions, a plasma only ignites within these slits, and the localized plasma results in localized patterned deposition of a-Si:H with feature widths compatible with application in an interdigitated back contact (IBC) solar cell design (760 μm). The homogeneity of the finger width and thickness over the surface of the M0 wafer is evaluated, with a 37% variation in thickness (at very high deposition rate, ∼1 nm/s) but only a 4.7% variation in finger width (MSE). With this application in mind, the impact of the deposition of such “fingers” on an underlying “blanket” passivation layer is assessed. Passivation is maintained or improved up to a given finger/blanket thickness ratio, above which the passivation is degraded. It is shown that the acceptable process window contains suitable thickness values for heterojunction (HJT) IBC solar cells, and the physical processes at the origin of this phenomenological observation are discussed.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Photovoltaic System Optimization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. Towards high-efficiency industrial p-type mono-like Si PERC solar cells10.1016/j.solmat.2019.110202 ↗
2. A cost roadmap for silicon heterojunction solar cells10.1016/j.solmat.2015.12.026 ↗
3. Exceeding conversion efficiency of 26% by heterojunction interdigitated back contact solar cell with thin film Si technology10.1016/j.solmat.2017.06.024 ↗
4. Aluminium BSF in silicon solar cells10.1016/S0927-0248(01)00185-4 ↗
5. Development of the PERC solar cell10.1109/JPHOTOV.2019.2899460 ↗
6. Interdigitated back contact silicon heterojunction solar cell and the effect of front surface passivation10.1063/1.2768635 ↗
7. High-efficiency heterojunction crystalline Si solar cells10.7567/JJAP.57.08RB20 ↗
8. Silicon heterojunction solar cell with interdigitated back contacts for a photoconversion efficiency over 2610.1038/nenergy.2017.32 ↗
9. A novel silicon heterojunction IBC process flow using partial etching of doped a-Si:H to switch from hole contact to electron contact in situ with efficiencies close to 2310.1002/pip.3101 ↗
10. Laser-induced BSF: a new approach to simplify IBC-SHJ solar cell fabrication
11. Damage-free laser ablation for emitter patterning of silicon heterojunction interdigitated back-contact solar cells10.1109/PVSC.2017.8366264 ↗
12. Emitter patterning for back-contacted Si heterojunction solar cells using laser written mask layers for etching and self-aligned passivation (LEAP)10.1109/JPHOTOV.2016.2566882 ↗
13. Simple emitter patterning of silicon heterojunction interdigitated back-contact solar cells using damage-free laser ablation10.1016/j.solmat.2018.06.027 ↗
14. Interdigitated back contact silicon heterojunction solar cells: towards an industrially applicable structuring method
15. Simple processing of back-contacted silicon heterojunction solar cells using selective-area crystalline growth10.1038/nenergy.2017.62 ↗
16. Maskless and contactless patterned silicon deposition using a localized PECVD process10.1088/1361-6595/ab5e2c ↗
17. Dry fabrication process for heterojunction solar cells through in-situ plasma cleaning and passivation10.1016/j.solmat.2009.10.016 ↗
18. High-efficiency crystalline silicon solar cells: status and perspectives10.1039/C5EE03380B ↗
19. Effects of a‐Si:H layer thicknesses on the performance of a‐Si:H∕c‐Si heterojunction solar cells10.1063/1.2559975 ↗