Study on reducing the contamination of metal impurities for casting silicon ingots by using non-oxide crucible barrier layer
Source abstract
Abstract
Abstract This work introduces a novel design of oxide-free and low-cost diffusion barrier layer to reduce the contamination from SiO2 crucible. The diffusion barrier layer consists of two Si3N4 layers and a middle layer of high purity Si powder. The diffusion barrier layer was applied for casting crystalline silicon with different types of seeds and the influence on impurity diffusion in crucible was analyzed. The results show that the diffusion barrier layer could effectively reduce the solid phase diffusion distance of metal impurities from crucible and significantly reduce the low minority carrier lifetime region at the bottom and edge of cast crystalline silicon ingot. Meanwhile, the performance of solar cells made of the wafers at the bottom and edge of ingots are obviously improved. Therefore, this non-oxide diffusion barrier layer could significantly improve ingot quality and increase ingot yield in industrial production.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. 2012 · vol. 2
2. The emergence of high-performance multicrystalline silicon in photovoltaics10.1016/j.jcrysgro.2016.10.072 ↗
3. Towards high-efficiency industrial p-type mono-like Si PERC solar cells10.1016/j.solmat.2019.110202 ↗
4. Silicon nitride coating and crucible—effects of using upgraded materials in the casting of multicrystalline silicon ingots10.1002/pip.777 ↗
5. Effect of the crucible and its coating on the red zone in multicrystalline silicon - analysis on solar cell level
6. Impact of impurities from crucible and coating on mc-silicon quality—the example of iron and cobalt10.1109/JPHOTOV.2013.2279116 ↗
7. On the low carrier lifetime edge zone in multicrystalline silicon ingots
8. Influencing factors on the formation of the low minority carrier lifetime zone at the bottom of seed-assisted cast ingots10.1016/j.jcrysgro.2014.05.015 ↗
9. Increased wafer yield in silicon ingots by the application of high purity silicon nitride-coating and high purity crucibles
10. Improvement of multicrystalline silicon ingot growth by using diffusion barriers10.1016/j.jcrysgro.2014.01.045 ↗
11. Laurent · 2015 · 610
12. Impact of different SiO2 diffusion barrier layers on lifetime distribution in multi-crystalline silicon ingots10.1016/j.jcrysgro.2019.125378 ↗
13. Reduced metal contamination from crucible and coating using a silicon nitride based diffusion barrier for the growth of cast quasi-single crystalline silicon ingots10.1016/j.jcrysgro.2019.02.055 ↗
14. The effect of diffusion barrier on minority carrier lifetime improvement of seed assisted cast silicon ingot10.1016/j.jcrysgro.2020.125684 ↗
15. Production of high performance multi-crystalline silicon ingot by using composite nucleant10.1016/j.jcrysgro.2020.125666 ↗
16. Growth of high-quality multi-crystalline silicon ingot by using Si particles embedded in the Si3N4 layer10.1016/j.jcrysgro.2020.125774 ↗
17. Wettability and infiltration of Si drop on silica substrate containing α-Si3N4 coating: influence of oxygen content in α-Si3N4 coating10.1016/j.ceramint.2020.02.036 ↗
18. Investigation of iron contamination of seed crystals and its impact on lifetime distribution in Quasi-mono silicon ingots10.1016/j.jcrysgro.2015.08.004 ↗
19. Influencing factors on the formation of the low minority carrier lifetime zone at the bottom of seed-assisted cast ingots10.1016/j.jcrysgro.2014.05.015 ↗
20. Grain boundary engineering of high performance multicrystalline silicon: control of iron contamination at the ingot edge10.1016/j.solmat.2017.06.035 ↗
21. Recrystallization processes in polycrystalline silicon10.1063/1.87995 ↗
22. Grain growth and mechanical properties in bulk polycrystalline silicon10.1023/A:1012425529753 ↗
23. Microstructure and grain growth of polycrystalline silicon grown in fluidized bed reactors10.1016/j.jcrysgro.2009.01.114 ↗
24. The effect of initial growth interface on the grain structure in HPMC-Si ingot
25. Effect of iron contamination on grain boundary states at a direct silicon bonded (110)/(100) interface10.1002/pssr.201004356 ↗
26. Investigating internal gettering of iron at grain boundaries in multicrystalline silicon via photoluminescence imaging10.1109/JPHOTOV.2012.2195550 ↗
27. Microstructure of multicrystalline silicon seeded by polysilicon chips and fluidized bed reactor granules10.1016/j.jcrysgro.2016.02.017 ↗
28. Sadahiro Tsurekawa, Hiroaki Takahashi, Yumi Nishibe, Tadao Watanabe, Potential barrier at grain boundaries in polycrystalline silicon: influence of grain-boundary character and copper/iron contamination, Philos. Mag. A 93(10–12):1413-1424.10.1080/14786435.2012.753482 ↗