journal article·2021-06

Temperature coefficient characterization of CIGSSe solar cells with layer modifications

Hamsa Ahmed, Mohamed Elshabasi, Jörg Ohland, Marko Stölzel, Alfons Weber, Robert Lechner, Thomas Dalibor, Jürgen Parisi, Sascha Schäfer, Stephan J. Heise

Publisher page

Abstract

Abstract One of the advantages of Cu(In,Ga)(S,Se)2 (CIGSSe) thin film solar cells is the lower temperature sensitivity of the solar cell parameters as compared to conventional silicon-based technologies. To further improve and to tailor CIGSSe temperature behavior for different environments, it is important to gain a detailed understanding of the microscopic mechanisms involved. The goal of the current study is to elucidate the impact of the individual functional layers within the CIGSSe solar cell stack on the temperature dependence of the overall cell performance. For this purpose, temperature-dependent current-voltage measurements were performed on a selected set of CIGSSe cells, containing a systematic variation of functional layers. The experimental results demonstrate that the absorber layer exhibits the largest influence on the temperature dependence of the power efficiency. An analysis of the contributing parameters revealed that the temperature-dependence of the power efficiency is mainly governed by a change in the open-circuit voltage. The temperature coefficient of the open-circuit voltage is analyzed in terms of the cell's physical parameters, including their minimum band gap and the temperature-dependence of the dark saturation current.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Advanced Thermoelectric Materials and Devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Solar cell efficiency tables (version 56)10.1002/pip.3303 ↗
2. Optical properties and grain boundary effects in CuInSe210.1116/1.571928 ↗
3. Non-vacuum route for CIGS thin film absorber on flexible glass substrates
4. Copper indium gallium selenide based solar cells – a review10.1039/C7EE00826K ↗
5. Energy band alignment in chalcogenide thin film solar cells from photoelectron spectroscopy10.1088/0953-8984/27/13/134201 ↗
6. Structures of Cu(In,Ga)(S,Se)2 solar cells for minimizing open-circuit voltage deficit: investigation of carrier recombination rates10.1002/pip.3137 ↗
7. The Zn(S,O,OH)/ZnMgO buffer in thin-film Cu(In,Ga)(Se,S)2 -based solar cells part II: magnetron sputtering of the ZnMgO buffer layer for in-line co-evaporated Cu(In,Ga)Se2 solar cells10.1002/pip.897 ↗
8. Material parameter sensitivity study on CIGS solar cell performance
9. Cu(In,Ga)(Se,S)2 solar cell research in Solar Frontier : progress and current status temperatures
10. Beneficial effect of post-deposition treatment in high-efficiency Cu(In,Ga)Se2 solar cells through reduced potential fluctuations10.1063/1.4960344 ↗
11. Pless · 2005
12. A study on photovoltaic parameters of mono-crystalline silicon solar cell with cell temperature10.1016/j.egyr.2015.03.004 ↗
13. The effect of temperature variations on solar cell efficiency
14. Temperature effect on performance of different solar cell technologies10.12911/22998993/105543 ↗
15. Blue skies and red sunsets: reliability of performance parameters of various p-n junction photovoltaic module technologies10.1080/23311916.2019.1691805 ↗
16. Behavior of four solar PV modules with temperature variation
17. Determination of the temperature dependency of the electrical parameters of CIGS solar cells10.1063/1.4979963 ↗
18. Experimental assessment of temperature coefficient theories for silicon solar cells10.1109/JPHOTOV.2015.2489864 ↗
19. Theoretical temperature dependence of solar cell parameters10.1016/0379-6787(86)90020-7 ↗
20. Temperature dependence of solar cell performance - an analysis10.1016/j.solmat.2012.02.019 ↗
21. A simulation study on the impact of band gap profile variations and secondary barriers on the temperature behavior, performance ratio, and energy yield of Cu(In,Ga)(Se,S)2 solar cells10.1002/pssa.201431272 ↗
22. Analysis of the temperature dependence of the open-circuit voltage10.1016/j.egypro.2012.07.041 ↗
23. The effect of the recombination mechanisms location on the temperature sensitivity of thin-film photovoltaic cells10.1051/epjpv/2019008 ↗
24. Theory and analysis of temperature coefficient of open-circuit voltage (dVOC/dT) in heterojunction solar cells
25. Advanced PVD buffers on the road to GW-scale CIGSSe production
26. Deep-levels in stoichiometry-varied Cu(In,Ga)(S,Se)2 solar cells10.1016/S0040-6090(03)00228-1 ↗
27. Light-soaking effects and capacitance profiling in Cu(In,Ga)Se2 thin-film solar cells with chemical-bath-deposited ZnS buffer layers10.1039/C6CP05306H ↗
28. Dupré · 2017
29. Efficiency potential of photovoltaic materials and devices unveiled by detailed-balance analysis10.1103/PhysRevApplied.7.044016 ↗
30. Metastable changes to the temperature coefficients of thin-film photovoltaic modules
31. General temperature dependence of solar cell performance and implications for device modelling10.1002/pip.496 ↗
32. Solar cells—operating principles, technology and system applications10.1016/0038-092X(82)90265-1 ↗
33. Würfel · 2009
34. Sze · 2006
35. Temperature coefficient imaging for silicon solar cells10.1109/JPHOTOV.2018.2828839 ↗
36. Temperature coefficients of crystal defects in multicrystalline silicon wafers10.1109/JPHOTOV.2020.2968111 ↗
37. High-performance low bandgap thin film solar cells for tandem applications10.1002/pip.3026 ↗
38. Direct evidence for grain boundary passivation in Cu(In,Ga)Se2 solar cells through alkali-fluoride post-deposition treatments10.1038/s41467-019-11996-y ↗
39. Effects of sodium and potassium on the photovoltaic performance of CIGS solar cells10.1109/JPHOTOV.2016.2621343 ↗