Using hole injection layers for decreased metastability and higher performance in Cu(In,Ga)Se2 devices
Source abstract
Abstract
Abstract Modifications to the buffer structure in Cu(In,Ga)Se2 (CIGS) solar cells are examined in terms of power conversion efficiency and metastability. Varying amounts of thin hole-injecting layers are introduced at different locations in the CIGS/Zn(O,S) device structure. It is found that such layers simultaneously increase performance and decrease metastability. The most effective variant produces devices without metastability and with higher efficiency than the CdS-only controls. The most effective location for hole injection is found to be between the Zn(O,S) buffer and the transparent conductor. At this location, passivation of the CIGS surface is not a function of the hole injection layer, and thus a variety of materials with appropriate band-edge energies should achieve the same purpose.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. 18% efficiency Cd-Free Cu(In,Ga)Se2 thin-film solar cells fabricated using chemical bath deposition (CBD)-ZnS buffer layers
2. ZnO/ZnS(O,OH)/Cu(In,Ga)Se2/Mo solar cell with 18.6% efficiency
3. New reaction kinetics for a high-rate chemical bath deposition of the Zn(S,O) buffer layer for Cu(In,Ga)Se2-based solar cells10.1002/pip.1244 ↗
4. Experimental investigation of Cu(In1-x,Gax)Se2/Zn(O1-z,Sz) solar cell performance10.1016/j.solmat.2010.09.009 ↗
5. Improved efficiency of Cu(In,Ga)Se2 thin film solar cells with chemically deposited ZnS buffer layers by air-annealing-formation of homojunction by solid phase diffusion
6. Heterointerface recombination of Cu(In,Ga)(S,Se)2-based solar cells with different buffer layers10.1002/pip.2952 ↗
7. 2020
8. Cd-free Cu(in,Ga)(Se,S)2 thin-film solar cell with record efficiency of 23.35%10.1109/JPHOTOV.2019.2937218 ↗
9. Highly efficient CIS solar cells and modules made by the co-evaporation process10.1016/j.tsf.2008.10.126 ↗
10. Impact of oxygen concentration during the deposition of window layers on lowering the metastability effects in Cu(In,Ga)Se2/CBD Zn(S,O) based solar cell10.1002/pip.2626 ↗
11. Investigation of the metastability behavior of CIGS based solar cells with ZnMgO–Zn (S,O,OH) window-buffer layers10.1016/j.tsf.2010.12.148 ↗
12. Stabilization of PN heterojunction between Cu(InGa)Se2 thin-film absorber and ZnO window with Zn(O, S, OH)x buffer10.1143/JJAP.39.2577 ↗
13. Large metastability in Cu (In,Ga)Se2 devices: the importance of buffer properties10.1002/pip.3145 ↗
14. A phenomenological model for systematization and prediction of doping limits in II–VI and compounds10.1063/1.367120 ↗
15. Band alignments in Zn(Cd)S(Se) strained layer superlattices10.1088/0268-1242/7/4/016 ↗
16. The band lineups at highly strained ZnS/CdS and ZnSe/ZnTe interfaces: effects of the quadratic deformation potentials and the relaxation of the semicore d-electrons10.1088/0953-8984/10/39/009 ↗
17. Valence band offsets at zinc-blende heterointerfaces with misfit dislocations: a first-principles study10.1103/PhysRevB.88.075319 ↗
18. Optimization of CBD CdS process in high-efficiency Cu(In,Ga)Se2-based solar cells10.1016/S0040-6090(01)01538-3 ↗
19. Surfactant-assisted growth of CdS thin films for photovoltaic applications10.1116/1.2194929 ↗
20. High efficiency Cu(In,Ga)Se2-based solar cells: processing of novel absorber structures
21. Required materials properties for high-efficiency CIGS modules
22. Open-circuit and doping transients of Cu(In,Ga)Se2 solar cells with varying Ga content10.1063/1.4907391 ↗
23. Role of the CdS buffer layer as an active optical element in Cu(in,Ga)Se2 thin-film solar cells10.1002/pip.438 ↗
24. Performance and Loss Analyses of High-Efficiency Chemical Bath Deposition (CBD)-ZnS/Cu(In1−xGax)Se2 thin-film solar cells10.1143/JJAP.41.L672 ↗
25. Numerical thickness optimization study of CIGS based solar cells with wxAMPSS10.1016/j.ijleo.2016.06.094 ↗
26. Numerical modeling of CIGS and CdTe solar cells: setting the baseline
27. Chemical bath deposition of CdS thin films: an approach to the chemical mechanism through study of the film microstructure10.1149/1.1838140 ↗
28. Improved photocurrent in Cu(in,Ga)Se2 solar cells: from 20.8% to 21.7% efficiency with CdS buffer and 21.0% Cd-free10.1109/JPHOTOV.2015.2458039 ↗
29. Improved rear surface passivation of Cu(in,Ga)Se2 solar cells: a combination of an Al2O3 rear surface passivation layer and nanosized local rear point contacts10.1109/JPHOTOV.2013.2287769 ↗
30. Photoconductivity of the sulfide, selenide, and telluride of zinc or cadmium10.1109/JRPROC.1955.278046 ↗
31. Blue-photon modification of nonstandard diode barrier in CuInSe2 solar cells10.1016/S0927-0248(98)00035-X ↗
32. Secondary barriers in CdS–CuIn1 − xGax Se2 solar cells10.1063/1.1850604 ↗
33. Interface-Barrier-induced J–V distortion of CIGS cells with sputtered-deposited Zn(S,O) window layers10.1109/JPHOTOV.2014.2301894 ↗
34. Current–voltage characteristics of fully solution processed high performance CuIn(S,Se)2 solar cells: crossover and red kink10.1016/j.solmat.2013.10.013 ↗
35. Cu(In,Ga)Se2 thin film solar cells with solution processed silver nanowire composite window layers: buffer/window junctions and their effects10.1016/j.solmat.2017.05.051 ↗
36. Nguyen · 2004
37. Examination of blocking current-voltage behaviour through defect chalcopyrite layer in ZnO/CdS/Cu(In,Ga)Se2/Mo solar cell10.1016/S0927-0248(97)00058-5 ↗
38. Understanding defect-related issues limiting efficiency of CIGS solar cells10.1016/j.solmat.2009.01.022 ↗
39. Generation-dependent charge carrier transport in Cu(In,Ga)Se2/CdS/ZnO thin-film solar-cells10.1063/1.4788827 ↗
40. Temperature dependent current-voltage and admittance spectroscopy on heat-light soaking effects of Cu(In,Ga)Se2 solar cells with ALD-Zn(O,S) and CBD-ZnS(O,OH) buffer layers10.1016/j.solmat.2015.06.044 ↗
41. Properties of Cd and Zn partial electrolyte treated CIGS solar cells
42. Impact of buffer and absorber properties in the vicinity of the interface on wide-gap Cu(In,Ga)Se2 solar cell performance
43. Photoluminescence and time‐resolved photoluminescence in Cu(In,Ga)Se2 thin films and solar cells10.1002/pssc.200881164 ↗
44. Cu(InGa)Se2 solar cells,”
45. Structural and chemical investigations of CBD- and PVD-CdS buffer layers and interfaces in Cu(In,Ga)Se2-based thin film solar cells10.1016/j.tsf.2004.11.033 ↗
46. The lattice mismatch between (112) chalcopyrite films and (0001) CdS substrates10.1016/0022-0248(79)90247-1 ↗
47. Interface engineering between CuInSe2 and ZnO10.1109/PVSC.1993.347140 ↗
48. Chemical bath deposition of CdS on CuInSe2: combining dry and wet processes for high efficiency thin film solar cells
49. High efficiency Cu(in,Ga)Se2 thin film solar cells without intermediate buffer layers
50. Nano-structural investigations on Cd-doping into Cu(In,Ga)Se2 thin films by chemical bath deposition process10.1016/S0040-6090(99)00767-1 ↗