journal article·2018-08Open access

Reaction pathway analysis of (AgxCu1−x)(In0.75Ga0.25)Se2 with x = 0.75 and 1.0

Sina Soltanmohammad, William N. Shafarman

Abstract

Abstract Reaction pathways during formation of Ag(In0.75Ga0.25)Se2 films were investigated by ex-situ characterization of time-progressive reactions using rapid thermal processing at 450 °C under 5% Ar/H2Se atmosphere. Composition measurements using energy dispersive x-ray spectroscopy (EDS) and X-ray fluorescence (XRF) show that with Ag/(Ag+Cu) = 1.0, Ga grading and Se uptake occur gradually up to 20 min. With 7 min reaction, there was no sign of a AgInSe2 phase and only a Ag(In,Ga)5Se8 chalcogenide phase formed. The reaction was completed with formation of Ag( In ,Ga)Se2 and Ag( In ,Ga)5Se8 within 20 min. The addition of Cu to the precursor so that Ag/(Ag+Cu) = 0.75 speeds up the reaction and reduces the formation of the Ag( In ,Ga)5Se8 phase. EDS and XRF analyses indicated that Ga grading and Se uptake were completed after 10 min. XRD analysis also shows formation of CuInSe2 on the surface of the sample with Cu after 3.5 min reaction prior to other chalcogenide formation. On the other hand, a strong Ag( In ,Ga)Se2 (112) XRD peak appeared after 5 min reaction compared to 10 min reaction for 100% Ag films. EDS and Raman scattering measurements on the back-side of the films after delamination from the substrate indicated that Ga accumulated in AgGaSe2 and Ga-Se phases at the back-side of films after 45 min reaction. XRD analysis showed that Ag tends to stay in the stable ζ-Ag3( In ,Ga) phase during the reaction with Ag/(Ag+Cu) = 1.0, but not with 0.75, and this causes the longer reaction time and the non-uniformity.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Advanced Thermoelectric Materials and Devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Tin incorporation in AgInSe2 thin films: influence on conductivity10.1021/acs.jpcc.5b00141 ↗
2. Optical properties of AgGaxIn1−xSe2 alloys10.1134/S1063782608020061 ↗
3. CO2 laser frequency doubling in a new nonlinear AgGaxIn1−xSe2 crystal10.1070/QE1999v029n10ABEH001600 ↗
4. Photoluminescence study of AgGaSe2, AgGa0.9In0.1Se2, and AgGa0.8In0.2Se2 crystals grown by the horizontal Bridgman technique10.1063/1.2940739 ↗
5. P. Vijayakumar G.A. Babu P. Ramasamy. Growth and physical characterization of AgGa1-xInxSe2 (x = 0.5) single crystals grown by modified vertical Bridgman method, 389, 2014, pp. 139–143.10.1016/j.jcrysgro.2013.11.096 ↗
6. C.P. Thompson, L. Chen, W.N. Shafarman, J. Lee, S. Fields, R.W. Birkmire, Bandgap gradients in (Ag,Cu)(In,Ga)Se2 thin film solar cells deposited by three-stage co-evaporation, in: Proceedings of the 2015 IEEE 42nd Photovolt. Spec. Conference, IEEE, 2015: pp. 1–6.10.1109/PVSC.2015.7355692 ↗
7. Structural and optical properties of (Ag,Cu)(In,Ga)Se2 polycrystalline thin film alloys10.1063/1.4880243 ↗
8. S. Soltanmohammad, D.M. Berg, L. Chen, K. Kim, H. Simchi, W.N. Shafarman, Effect of sputtering sequence on the properties of Ag-Cu-In-Ga metal precursors and reacted (Ag,Cu)(In,Ga)Se2 films, in: Proceedings of the 2014 IEEE 40th Photovolt. Spec. Conference, IEEE, 2014: pp. 1707–1711.10.1109/PVSC.2014.6925250 ↗
9. Photovoltaic performance of p-AgInSe2 rn-CdS thin film heterojunctions10.1016/S0167-577X(97)00158-4 ↗
10. Characterization of p-AgGa0.25In0.75Se2/n-Zn0.35Cd0.65S polycrystalline thin film heterojunctions10.1016/S0921-5107(01)00663-8 ↗
11. Nonvacuum solution synthesis of (Ag,Cu)(In,Ga)Se2 absorbers for applications in thin-film solar cells10.1111/jace.13818 ↗
12. An investigation of the surface properties of (Ag,Cu)(In,Ga)Se2 thin films10.1109/JPHOTOV.2012.2204391 ↗
13. Novel wide-band-gap Ag(In1−xGax)Se2 thin film solar cells10.1557/PROC-865-F11.1 ↗
14. Crystallographic and electrical properties of wide gap Ag(In1−x,Gax)Se2 thin films and solar cells10.1016/j.stam.2005.11.016 ↗
15. Characterization of radiative recombination in Ag(In,Ga)Se2 thin films by photoluminescence10.1063/1.4954922 ↗
16. Deposition of Ag(In,Ga)Se2 solar cells by a modified three-stage method using a low-temperature-deposited Ag–Se cap layer10.7567/JJAP.52.055801 ↗
17. Structural properties of Ag-based chalcopyrite compound thin films for solar cells10.1557/PROC-865-F5.12 ↗
18. Ag–Cu–In–Ga metal precursor thin films for (Ag,Cu)(In,Ga)Se2 solar cells10.1109/JPHOTOV.2016.2615682 ↗
19. S. Soltanmohammad, W.N. Shafarman, Reaction pathway analysis of Ag-alloyed Cu(In,Ga)Se2 absorber materials, in: 2016 IEEE 43rd Photovolt. Spec. Conference, IEEE: 2016: pp. 2269–2273.10.1109/PVSC.2016.7750040 ↗
20. Characterization of (AgCu)(InGa)Se2 absorber layer fabricated by a selenization process from metal precursor10.1109/JPHOTOV.2012.2221083 ↗
21. Design and experimental implementation of an effective control system for thin film Cu(InGa)Se2 production via rapid thermal processing10.1016/j.jprocont.2016.07.005 ↗
22. ICDD DDView 4.8.3.4 using PDF-2, JCPDS - International Centre for Diffraction Data, 2008.
23. Incongruent reaction of Cu–(InGa) intermetallic precursors in H2Se and H2S10.1063/1.2787151 ↗
24. Raman scattering in In2Se3 and InSe2 amorphous films10.1016/S0022-3093(99)00710-3 ↗
25. Raman investigation of InSe and GaSe single-crystals oxidation10.1088/0268-1242/17/2/101 ↗
26. P. Villars, H. Okamoto, eds., Ag-In Binary Phase Diagram 0-100 at%, in: Datasheet from PAULING FILE Multinaries Edition 2012 in SpringerMaterials 〈http://materials.springer.com/isp/phase-diagram/docs/c_0100004〉, (n.d.).
27. Lattice spacing relationships and the electronic structure of H.C.P. ζ phases based on silver10.1080/14786436108244417 ↗
28. Understanding solid-state microwave synthesis using the diamond-like semiconductor, AgInSe2, as a case study10.1016/j.materresbull.2006.09.025 ↗
29. Production and characterization of layer by layer sputtered single-phase AgInSe2 thin film by thermal selenization10.1016/j.apsusc.2013.09.043 ↗
30. Synthesis and characterization of silver indium diselenide thin films prepared via the sol-gel assisted process10.1111/j.1744-7402.2012.02779.x ↗
31. Effect of rapid thermal processing on the structural and device properties of (Ag,Cu)(In,Ga)Se2 thin film solar cells10.1016/j.tsf.2012.11.061 ↗
32. Ab initio calculations of the vibrational spectra of AgInSe2 and AgInTe210.1134/S1063783409100217 ↗
33. Structural properties of Ge doped CuGaSe2 films studied by Raman and Photoluminescence spectroscopy10.1016/j.tsf.2006.12.163 ↗
34. Ramirez · Polariz. Micro-Raman Spectra in CuGaSe2 · 1992 · 84 · 551
35. Ge doping effect on properties of AgInSe2 thin films10.1143/JJAP.41.1527 ↗
36. Raman spectra of the ordered vacancy compounds CuIn3Se5 and CuGa3Se510.1063/1.121893 ↗
37. Vibrational modes in ZnSiP210.1103/PhysRevB.2.960 ↗
38. Lattice vibrations in AIBIIICVI2 chalcopyrite compounds
39. Defect-induced structural disorder in tetragonal Cu(In1−xGax)5Se8 thin films investigated by Raman spectroscopy: the effect of Ga addition10.1088/0953-8984/16/23/029 ↗
40. Characterization of mechanically synthesized AgInSe2 nanostructures 110.1139/cjp-2013-0546 ↗
41. One-pot synthesis of new-phase AgInSe2 nanorods10.1021/ja060543u ↗
42. Independent composition and size control for highly luminescent indium-rich silver indium selenide nanocrystals10.1021/acsnano.5b04636 ↗
43. Raman investigations of Cu(In,Ga)Se2 thin films with various copper contents10.1016/j.tsf.2008.07.011 ↗
44. Lattice vibrations of CuInSe2 and CuGaSe2 by Raman microspectrometry10.1063/1.352195 ↗
45. Raman spectroscopy of CuInSe2 thin films prepared by selenization10.1016/S0022-3697(03)00216-6 ↗
46. Photoluminescence and Raman spectra of the ordered vacancy compound CuGa5Se810.1016/j.physb.2007.08.098 ↗
47. Effects of substrates on structural and optical properties of Cu-poor CuGaSe2 thin films prepared by in-situ co-evaporation10.1016/j.cap.2013.01.044 ↗