journal article·2016-12

The influence of nitrogen on laser doping from phosphorous doped a-SiNx layers

Bernd Steinhauser, Ulrich Jäger, Jan Benick, Ellen Chong, Jenny Lam, Rob Steeman, Hannes Rostan, Jan Nekarda, Martin Hermle, Ralf Preu, Stefan W. Glunz

Publisher page

Abstract

Abstract Laser diffusion from PECVD layers can result in the incorporation of impurities like nitrogen into crystalline silicon. It is shown that the nitrogen can have a significant influence on the laser doping process. The incorporated nitrogen can affect the material properties resulting in misinterpretation of measurement results and accumulation of nitrogen at the surface can lead to negative effects such as improper contact formation. An approach reducing the amount of nitrogen content in the PECVD layer and the LBSF is presented. This new approach allows for a partial decoupling of the passivation and doping properties of the passivation layers. The doping efficiency of the laser doping process was significantly improved while keeping the recombination properties low. The higher doping efficiency was found to be of major importance for a reproducible level of LBSF/metal contact resistivity on the rear side. Using the adapted process with reduced nitrogen content, it is shown that the doping concentration is high enough to be contacted by screen printed silver pastes. Solar cells using the new approach are presented reaching efficiencies up to 20.9% on a cell area of 149 cm 2 . The influence of the higher doping efficiency reflected into the new solar cells allowing fill factors of up to 80.1%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Integrated Circuits and Semiconductor Failure Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. 24% efficient perl silicon solar cell: recent improvements in high efficiency silicon cell research10.1016/0927-0248(95)00117-4 ↗
2. High efficiency n-type Si solar cells on Al2O3-passivated boron emitters10.1063/1.2945287 ↗
3. Silicon diodes made by laser irradiation10.1016/0038-1101(68)90008-7 ↗
4. Normal laser damage of silicon solar cells without phase change10.1063/1.1655316 ↗
5. Defects in laser-processed semiconductors
6. Defects in laser damaged silicon observed by DLTS10.1002/pssa.2210480144 ↗
7. P.M. Mooney, J.C. Bourgoin, Laser annealing of defects in VPE and CZ grown gallium arsenide with a pulsed Nd:YAG laser, 1982, pp. 255–260.
8. Laser-induced damage studies in silicon and silicon-based photodetectors10.1364/AO.35.007061 ↗
9. Solubility limit of impurities in silicon after laser induced melting10.1007/BF00899564 ↗
10. Macroscopic theory of pulsed-laser annealing. I. Thermal transport and melting10.1103/PhysRevB.23.2923 ↗
11. Macroscopic theory of pulsed-laser annealing.: II. Dopant diffusion and segregation10.1103/PhysRevB.23.5555 ↗
12. Macroscopic theory of pulsed-laser annealing. III. Nonequilibrium segregation effects10.1103/PhysRevB.25.2786 ↗
13. Incorporation of oxygen into silicon during pulsed-laser irradiation10.1143/JJAP.19.L375 ↗
14. Laser induced defects in laser doped solar cells10.1002/pip.1043 ↗
15. Passivation-induced cavity defects in laser-doped selective emitter Si solar cells—formation model and recombination analysis10.1109/JPHOTOV.2015.2407152 ↗
16. Substrate heating and emitter dopant effects in laser-annealed solar cells10.1063/1.92704 ↗
17. Laser processing for high-efficiency Si solar cells10.1063/1.330568 ↗
18. Silicon solar cells realized by laser induced diffusion of vacuum-deposited dopants10.1063/1.328806 ↗
19. E. Schneiderlöchner, R. Preu, R. Lüdemann, S.W. Glunz, G. Willeke, Laser-fired Contacts (LFC), 2001, pp. 1303–1306.
20. S.R. Wenham, A. Lennon, R.Y. Utama, A.W.Y. Ho-Baillie, Method of forming Openings in selected Material: US Patent, 2010.
21. Industrially feasible rear passivation and contacting scheme for high-efficiency n-type solar cells yielding a Voc of 700mV10.1109/TED.2010.2051194 ↗
22. Laser doping using phosphorus-doped silicon nitrides10.1016/j.egypro.2011.06.204 ↗
23. Investigation of charges carrier density in phosphorus and boron doped SiNx:H layers for crystalline silicon solar cells: H layers for crystalline silicon solar cells10.1016/j.mseb.2012.11.009 ↗
24. Firing-stable PassDop passivation for screen printed n-type PERL solar cells based on a-SiNx:P10.1016/j.solmat.2014.03.047 ↗
25. P-type c-Si solar cells based on rear side laser processing of Al2O3/SiCx stacks10.1016/j.solmat.2012.05.012 ↗
26. PassDop rear side passivation based on Al2O3/a-SiCx:B stacks for p-type PERL solar cells10.1016/j.solmat.2014.05.001 ↗
27. Contactless determination of current–voltage characteristics and minority-carrier lifetimes in semiconductors from quasi-steady-state photoconductance data10.1063/1.117723 ↗
28. Dimensionless solution of the equation describing the effect of surface recombination on carrier decay in semiconductors10.1063/1.357521 ↗
29. Improved quantitative description of Auger recombination in crystalline silicon10.1103/PhysRevB.86.165202 ↗
30. Statistics of the recombinations of holes and electrons10.1103/PhysRev.87.835 ↗
31. Electron-hole recombination in germanium10.1103/PhysRev.87.387 ↗
32. A laser based process for the formation of a local back surface field for n-type silicon solar cells10.1016/j.tsf.2011.01.237 ↗
33. “ontact resistance: Its measurement and relative importance to power loss in a solar cell10.1109/T-ED.1984.21584 ↗
34. A unified mobility model for device simulation: I. Model equations and concentration dependence10.1016/0038-1101(92)90325-7 ↗
35. A unified mobility model for device simulation: II. Temperature dependence of carrier mobility and lifetime10.1016/0038-1101(92)90326-8 ↗
36. Nitrogen in silicon10.1063/1.1735180 ↗
37. The N-Si (nitrogen-silicon) system10.1007/BF02841719 ↗
38. Influence of deep traps on the measurement of free-carrier distributions in semiconductors by junction capacitance techniques10.1063/1.1663500 ↗
39. Capacitance-voltage profiling and the characterisation of III-V semiconductors using electrolyte barriers10.1088/0268-1242/1/1/002 ↗
40. Numerical calculation of effective permittivity of lossless dielectric mixtures using boundary integral method10.1109/94.368637 ↗
41. An etch for delineation of defects in silicon10.1149/1.2115767 ↗
42. A. Sugianto, B.S. Tjahjono, J.H. Guo, R.S. Wenham, Impact of laser induced defects on the performance of solar cells using localised laser doped regions beneath the metal contacts, in: Proceedings of the 22nd European Photovoltaic Solar Energy Conference, 2007, pp. 1759–1762.