journal article·2016-10

Cost-effective hollow honeycomb textured back reflector for flexible thin film solar cells

Huanjing Liu, Qian Huang, Guofu Hou, Baochen Jiao, Guangcai Wang, Wen Zhang, Dekun Zhang, Ying Zhao, Xiaodan Zhang

Publisher page

Abstract

Abstract We demonstrate an effective light trapping back reflector (BR) for flexible thin-film solar cells (TFSCs) that is composed of self-ordered flexible nanoporous anodic aluminum oxide (np-AAO) with hollow hexagonally-symmetric honeycomb textures (hollow-HSHT) under a cost-effective anodic oxidation approach. The dielectric nano-scatters are well compatible with nearly all types of TFSCs, including cells produced using high temperature processes. The performance of the hollow-HSHT nanostructure were investigated both experimentally and theoretically. The enhanced diffraction behavior, guided resonance and light absorption were identified through finite-difference-time-domain (FDTD) simulation. A highly conductive AZO film was deposited on the hollow-HSHT as a back electric contact for making solar cells. As a result, the flexible and periodic hollow-HSHT based BR yielded an efficiency of 8.3% for thin-film a-Si:H solar cell, which is much higher than the efficiency of 6.7% for the reference cell on the flat AZO back contact. Furthermore, the hollow-HSHT based BR provides a means of enhancing absorption in whole wavelength range, thus opening an approach for creating high-efficiency, low cost flexible TFSCs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thin-Film Transistor Technologies · Optical Coatings and Gratings · Silicon Nanostructures and Photoluminescence

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Light trapping enhancement in a thin film with 2D conformal periodic hexagonal arrays
2. Employing dielectric diffractive structures in solar cells – a numerical study10.1002/pssa.200880453 ↗
3. Optical modeling of a-Si:H solar cells with rough interfaces: effect of back contact and interface roughness10.1063/1.1324690 ↗
4. Texturing industrial multicrystalline silicon solar cells10.1016/j.solener.2003.08.019 ↗
5. TCO and light trapping in silicon thin film solar cells10.1016/j.solener.2004.03.015 ↗
6. Light absorption enhancement in thin-film solar cells using whispering gallery modes in dielectric nanospheres
7. Efficient light trapping in low aspect-ratio honeycomb nanobowl surface texturing for crystalline silicon solar cell applications10.1063/1.4851236 ↗
8. Optical absorption enhancement in amorphous silicon nanowire and nanocone arrays10.1021/nl802886y ↗
9. Design of dual-diameter nanoholes for efficient solar-light harvesting10.1186/1556-276X-9-481 ↗
10. Nanodome solar cells with efficient light management and self-cleaning10.1021/nl9034237 ↗
11. Ultra-broadband performance enhancement of thin-film amorphous silicon solar cells with conformal zig-zag configuration10.1364/OL.38.005071 ↗
12. Optical performance analysis of inkjet-textured multicrystalline silicon solar cells using angular distribution matrices10.1016/j.solener.2015.05.030 ↗
13. High-efficiency microcrystalline silicon solar cells on honeycomb textured substrates grown with high-rate VHF plasma-enhanced chemical vapor deposition10.7567/JJAP.54.08KB05 ↗
14. Effect of self-orderly textured back reflectors on light trapping in thin-film microcrystalline silicon solar cells10.1063/1.3108689 ↗
15. Enhancement of light trapping in thin-film hydrogenated microcrystalline Si solar cells using back reflectors with self-ordered dimple pattern10.1063/1.2993351 ↗
16. Improved two-step anodization technique for ordered porous anodic aluminum membranes
17. Combing randomly textured surfaces and one-dimensional photonic crystals as efficient light-trapping structures in hydrogenated amorphous silicon solar cells10.1016/j.solmat.2015.06.050 ↗
18. Periodically textured metal electrodes: large-area fabrication, characterization, simulation, and application as efficient back-reflective scattering contact-electrodes for thin-film solar cells10.1039/C4TA02445A ↗
19. Double-layered Ag–Al back reflector on stainless steel substrate for a-Si:H thin film solar cells
20. Correlation of texture of Ag/ZnO back reflector and photocurrent in hydrogenated nanocrystalline silicon solar cells10.1016/j.solmat.2012.04.036 ↗
21. Plasmonic nanostructure design for efficient light coupling into solar cells10.1021/nl8022548 ↗
22. Performance enhancement of thin-film amorphous silicon solar cells with low cost nanodent plasmonic substrates10.1039/c3ee41139g ↗
23. Modeling light trapping in nanostructured solar cells10.1021/nn203906t ↗
24. Light trapping in thin-film silicon solar cells with submicron surface texture10.1364/OE.17.023058 ↗
25. Understanding light trapping by light scattering textured back electrodes in thin film n-i‐p-type silicon solar cells10.1063/1.2751117 ↗
26. Thin-film solar cells10.1016/j.tsf.2009.03.056 ↗