Analysis of ITO cleaning protocol on surface properties and polymer: Fullerene bulk heterojunction solar cell performance
Source abstract
Abstract
Abstract In the traditional organic solar cell architecture, indium tin oxide (ITO) serves as the transparent electrode and substrate for solution-cast device layers. Hydrophobic contaminants are known to modify ITO wettability and other properties, making selection of an effective cleaning scheme essential. In this work, we demonstrate that certain solvent-based routines provide essentially equivalent surface properties as coupled solvent+UV-ozone protocols reported in literature. Surface energy analysis further reveals that solvent selection can effectively tune ITO charge transport. Fabricated devices showed comparable performance, indicating that interfacial resistances are not limiting factors in the model OSC system and that UV-ozone exposure could be eliminated to reduce commercialization costs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies · Silicon and Solar Cell Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Roll-to-roll fabrication of polymer solar cells10.1016/S1369-7021(12)70019-6 ↗
2. Effects of thickness and thermal annealing of the PEDOT:PSS layer on the performance of polymer solar cells10.1016/j.orgel.2008.10.003 ↗
3. Recent progress in the morphology of bulk heterojunction photovoltaics10.1039/c1sm06147j ↗
4. Interplay of cleaning and de-doping in oxygen plasma treated high work function indium tin oxide (ITO)10.1016/j.orgel.2012.05.036 ↗
5. Surface characterisation and functionalisation of indium tin oxide anodes for improvement of charge injection in organic light emitting diodes10.1016/j.tsf.2007.03.163 ↗
6. Influence of plasma treatment of ITO surface on the growth and properties of hole transport layer and the device performance of OLEDs10.1016/j.orgel.2007.08.002 ↗
7. Phosphonic acid modification of indium–tin oxide electrodes: combined XPS/UPS/contact angle studies10.1021/jp710893k ↗
8. Influence of indium tin oxide surface treatment on spatially localized photocurrent variations in bulk heterojunction organic photovoltaic devices10.1021/jp209570h ↗
9. Surface energy for electroluminescent polymers and indium-tin-oxide10.1016/S0169-4332(02)01328-4 ↗
10. Surface cleaning of indium tin oxide by atmospheric air plasma treatment with the steady-state airflow for organic light emitting diodes10.1016/j.surfcoat.2006.07.202 ↗
11. Consequences of anode interfacial layer deletion. HCl-treated ITO in P3HT:PCBM-based bulk-heterojunction organic photovoltaic devices10.1021/la902879h ↗
12. Anode interfacial tuning via electron-blocking/hole-transport layers and indium tin oxide surface treatment in bulk-heterojunction organic photovoltaic cells10.1002/adfm.200901045 ↗
13. Solution processed WO3 layer for the replacement of PEDOT:PSS layer in organic photovoltaic cells10.1016/j.orgel.2012.01.033 ↗
14. New polymer acceptor for solar cells application10.1016/j.synthmet.2012.02.001 ↗
15. Effects of oxidation state and crystallinity of tungsten oxide interlayer on photovoltaic property in bulk hetero-junction solar cell10.1021/jp2122505 ↗
16. Effect of indium and tin contamination on the efficiency and electronic properties of organic bulk hetero-junction solar cells10.1016/j.solmat.2011.07.012 ↗
17. Polymer solar cells using chlorinated indium tin oxide electrodes with high work function as the anode10.1016/j.solmat.2011.10.002 ↗
18. Structural templating of chloro–aluminum phthalocyanine layers for planar and bulk heterojunction organic solar cells10.1016/j.orgel.2011.08.031 ↗
19. Introduction of perylene units for enhanced interchain interaction in conjugated polymers for organic photovoltaic devices10.1021/ma202712r ↗
20. Effects of ZnO fabricating process on the performance of inverted organic solar cells10.1016/j.orgel.2012.03.021 ↗
21. Van Oss · 2006
22. M.D. Clark, M.L. Jespersen, R.J. Patel, B.J. Leever, Predicting vertical phase segregation in polymer-fullerene heterojunction solar cells by free energy analysis, ACS Applied Materials & Interfaces (in press).10.1021/am4003777 ↗
23. Investigation of surface energy for organic light emitting polymers and indium tin oxide10.1016/S0040-6090(00)00994-9 ↗
24. Berg · 2010
25. Surface treatment and characterization of ITO thin films using atmospheric pressure plasma for organic light emitting diodes10.1016/j.jcis.2007.02.011 ↗
26. Surface conditioning of indium-tin oxide anodes for organic light-emitting diodes10.1016/S0040-6090(03)01185-4 ↗
27. Effective oxygen plasma treatment on indium tin oxide electrode to improve organic solar cell efficiency10.1002/pssa.201127602 ↗
28. Work-function changes of treated indium-tin-oxide films for organic light-emitting diodes investigated using scanning surface-potential microscopy10.1063/1.1884245 ↗
29. Effect of UV-ozone treatment on ITO and post-annealing on the performance of organic solar cells10.1016/j.synthmet.2008.11.024 ↗
30. Improvement of organic solar cells by flexible substrate and ITO surface treatments10.1016/j.apsusc.2010.06.011 ↗