journal article·2014-06

Solid-state selenization of printed Cu(In,Ga)S2 nanocrystal layer and its impact on solar cell performance

Sang-Wook Park, Deok-In Kim, Tae-Seok Lee, KyeUng Lee, Yeokwon Yoon, Yang Hwi Cho, Jae Hong Kim, Kyung Min Ahn, Kyoung Jun Lee, Chan-Wook Jeon

Publisher page

Abstract

Abstract Cu(In,Ga)S 2 nanopowder was printed on Mo-coated sodalime glass substrates and selenized from a Se-coated cover glass. The selenized Cu(In,Ga)(Se,S) 2 film consisted of three layers with a different morphologies and micro-structures. Although the top layer showed large grains recrystallized from nanocrystals, the bottom layer was almost identical to the original precursor. The middle layer, as a thin boundary layer was found to be a mixture of carbon and Cu sulfoselenide. At a higher Se thickness (>1.2 μm), a lower fill factor and short circuit current density were obtained, which might result from the accumulation of a Cu secondary phase. The solar cell, which consisted of Al 2 O 3 :ZnO/i-ZnO/CdS/Cu(In,Ga)(S,Se)/Mo/glass using the selenized absorber, showed the following properties: efficiency=8.28%, J sc =26.14 mA/cm 2 , V oc =0.483 V, and fill factor=65.58% for AMG1.5 at 25 °C.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. Non-vacuum processing of CuIn1-xGaxSe2 solar cells on rigid and flexible substrates using nanoparticle precursor inks10.1016/S0040-6090(03)00253-0 ↗
2. Five-source PVD for the deposition of Cu(In1−xGax)(Se1−ySy)2 absorber layers10.1016/j.tsf.2004.11.049 ↗
3. Synthesis of homogeneous pentenary chalcopyrite alloys with a classical two-step growth process10.1016/j.jpcs.2005.09.009 ↗
4. Low-cost CIGS solar cells by paste coating and selenization10.1016/j.tsf.2004.11.007 ↗
5. CuInSe2 (CIS) thin film solar cells by direct coating and selenization of solution precursors
6. Solution-processed Cu(In,Ga)(S,Se)2 absorber yielding a 15.2% efficient solar cell10.1002/pip.1253 ↗
7. CuIn(S,Se)2 thin film solar cells from nanocrystal inks: effect of nanocrystal precursors10.1016/j.tsf.2011.08.007 ↗
8. Control of Ga distribution in Cu(In,Ga)Se2 photovoltaic absorber by solid-state selenizatoin of CuGa/In/Se/In/CuGa stack10.7567/JJAP.51.10NC21 ↗
9. Thin-film solar cells: device measurements and analysis10.1002/pip.518 ↗
10. Cu(In,Ga)Se2 solar cells: device stability based on chemical flexibility10.1002/(SICI)1521-4095(199908)11:11<957::AID-ADMA957>3.0.CO;2-1 ↗
11. Metastabilities in the electrical characteristics of CIGS devices: experimental results vs. theoretical predictions10.1016/j.tsf.2006.12.038 ↗
12. Sulfide nanocrystal inks for dense Cu(In1-xGax)(S1-ySey)2 absorber films and their photovoltaic performance10.1021/nl901538w ↗
13. C.P. Liu, A study of sulfide conversion process of CuInS2 film (Ph.D. thesis), National Sun Yat-sen University, 2006, p. 92.
14. J.R. Tuttle, M. Contreras, A. Tennant, D. Albin, and R. Noufi, High efficiency thin-film Cu(In,Ga)Se2-based photovoltaic devices: progress towards a universal approach to absorber fabrication, in: Proceedings of IEEE Photovoltaic Specialist Conference, 1993, pp. 415–42110.1109/PVSC.1993.347146 ↗