Process simplifications in large area hybrid silicon heterojunction solar cells
Source abstract
Abstract
Abstract Recently, large area hybrid silicon heterojunction cells (SHJ) with nickel/copper (Ni/Cu) plated front contacts were shown to benefit from a simpler processing sequence than n-PERT cells featuring a boron diffused rear emitter. Hybrid refers here to the combination of a diffused front surface field (FSF) and a SHJ rear emitter. In this work, further process simplifications for such hybrid SHJ cells are evaluated. Based on reflectance and adhesion considerations, stacks of tin-doped indium oxide and copper (ITO/Cu) and chromium/silver (Cr/Ag) are tested as alternative to the previously chosen ITO/Ag rear contact stack. Using ITO/Cu/Al as rear contact stack, average efficiencies of 20.8±0.2% are presented on 6-inch wafers. We also demonstrate that the excimer laser annealing step previously employed to form nickel silicides at the front side can be skipped without comprising solder tab adhesion quality.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. S.W. Glunz, J. Benick, D. Biro, M. Bivour, M. Hermle, D. Pysch, M. Rauer, C. Reichel, A. Richter, M. Rudiger, C. Schmiga, D. Suwito, A. Wolf, R. Preu, n-Type silicon-enabling efficiencies >20% in industrial production, in: Proceedings of the 35th IEEE Photovoltaic Specialists Conference, 2010, pp. 50–56.10.1109/PVSC.2010.5614203 ↗
2. A wafer-based monocrystalline silicon photovoltaics road map: utilizing known technology improvement opportunities for further reductions in manufacturing costs10.1016/j.solmat.2013.01.030 ↗
3. M. Hermle, F. Feldmann, R. Müller, C. Reichel, J. Benick, S.W. Glunz, Processes for highly efficient solar cells with low complexity, in: Proceedings of the 29th European Photovoltaic Solar Energy Conference and Exhibition, Amsterdam, The Netherlands, 2014.
4. Bifaciality: one small step for technology, one giant leap for kWh cost reduction
5. S. Goda, Cell mass production and array field demonstration of n-type bifacial ‘EarthON’, in: Proceedings of the nPV Workshop, 's Hertogenbosch, The Netherlands, 2014.
6. Imec pushes commercially ready n-pert solar cell to record 22% conversion efficiency, Imec Press Release. Available at: 〈http:/www.pv-tech.org/news/imec_pushes_commercially_ready_n_pert_solar_cell_to_record_22_conversion_ef〉, January 14, 2015.
7. Evaluation of advanced p-PERL and n-PERT large area silicon solar cells with 20.5% energy conversion efficiencies10.1002/pip.2478 ↗
8. M. Aleman, A. Uruena de Castro, P. Choulat, B. Hallam, C. Dang, R. Russell, F. Duerinckx, E. Cornagliotti, J. Szlufcik, Reducing front recombination losses to improve the efficiency of rear junction Cu-plated n-Si cells, in: Proceedings of the 29th European Photovoltaic Solar Energy Conference and Exhibition, Amsterdam, The Netherlands, 2014, pp. 528–531.
9. Efficiency enhancement of i-PERC solar cells by implementation of a laser doped selective emitter10.1016/j.solmat.2014.11.028 ↗
10. Contact passivation in silicon solar cells using atomic‐layer‐deposited aluminum oxide layers10.1002/pssr.201105285 ↗
11. Amorphous silicon passivated contacts for diffused junction silicon solar cells10.1063/1.4872262 ↗
12. B. Lim, T. Brendemühl, M. Berger, A. Christ, T. Dullweber, n-PERT back junction solar cells: an option for the next industrial technology generation, in: Proceedings of the 29th European Photovoltaic Solar Energy Conference and Exhibition, Amsterdam, The Netherlands, 2014, pp. 661–665.
13. Y. Wan, C. Samundsett, T. Kho, J. McKeon, L. Black, D. Macdonald, A. Cuevas, J. Sheng, Y. Sheng, S. Yuan, C. Zhang, Z. Feng, P.J. Verlinden, Towards industrial advanced front-junction n-type silicon solar cells, in: Proceedings of the 40th IEEE Photovoltaic Specialists Conference, 2014, pp. 862–865.10.1109/PVSC.2014.6925051 ↗
14. E. Cornagliotti, A. Sharma, A. Uruena, M. Aleman, L. Tous, R. Russell, P. Choulat, J. Chen, J. John, F. Duerinckx, B. Dielissen, R. Görtzen, L. Black, J. Szlufcik, Large area n-type c-Si solar cells featuring rear emitter and efficiency beyond 21%, in: Proceedings of the 6th World Conference on Photovoltaic Energy Conversion, Kyoto, Japan, 2014.
15. M. Bivour, C. Meinhardt, D. Pysch, C. Reichel, K. Ritzau, M. Hermle, S.W. Glunz, n-Type silicon solar cells with amorphous/crystalline silicon heterojunction rear emitter, in: Proceedings of the 35th IEEE Photovoltaic Specialists Conference, 2010, pp. 1304–1308.10.1109/PVSC.2010.5614252 ↗
16. Improving the a-Si:H(p) rear emitter contact of n-type silicon solar cells10.1016/j.solmat.2012.06.036 ↗
17. Large-area hybrid silicon heterojunction solar cells with Ni/Cu plated front contacts10.1016/j.egypro.2014.08.051 ↗
18. Infrared light management in high-efficiency silicon heterojunction and rear-passivated solar cells10.1063/1.4772975 ↗
19. Improved amorphous/crystalline silicon interface passivation by hydrogen plasma treatment10.1063/1.3641899 ↗
20. Current losses at the front of silicon heterojunction solar cells10.1109/JPHOTOV.2011.2174967 ↗
21. Parasitic absorption in the rear reflector of a silicon solar cell: simulation and measurement of the sub-bandgap reflectance for common dielectric/metal reflectors10.1016/j.solmat.2013.06.024 ↗
22. Surface-plasmon-induced light absorption on a rough silver surface10.1063/1.3537812 ↗
23. Mette · 2007
24. Ultra high amorphous silicon passivation quality of crystalline silicon surface using in‐situ post‐deposition treatments10.1002/pssr.201409494 ↗
25. S.N. Granata, L. Tous, T. Bearda, J. Nassar, R. Cariou, C. Trompoukis, K. Van Nieuwenhuysen, Y. Abdulraheem, I. Gordon, J. Szlufcik, P. Roca i Cabarrocas, R. Mertens, J. Poortmans, Optical and electrical improvement of rear side ITO heterojunction back contact solar cells, in: Proceedings of the 29th European Photovoltaic Solar Energy Conference and Exhibition, 2014, pp. 1024–1027.
26. L. Tous, R. Russell, J. Becker, J. Bertens, E. Cornagliotti, P. Choulat, J. John, F. Duerinckx, J. Szlufcik, J. Poortmans, R. Mertens, A simple copper based plating process resulting in efficiencies above 20.5% using pilot processing equipment, in: Proceedings of the 28th European Photovoltaic Solar Energy Conference and Exhibition, 2013, pp. 1008–1012.
27. Recombination activity of interstitial iron and other transition metal point defects in p- and n-type crystalline silicon10.1063/1.1812833 ↗
28. Evaluation of high‐temperature exposure of photovoltaic modules10.1002/pip.1103 ↗
29. Tous · 2014
30. Long term stability of copper front side contacts for crystalline silicon solar cells10.1016/j.solmat.2014.12.024 ↗
31. Effect of tin-doped indium oxide film thickness on the diffusion barrier between silicon and copper10.1016/j.tsf.2006.04.042 ↗
32. Failure behavior of ITO diffusion barrier between electroplating Cu and Si substrate annealed in a low vacuum10.1016/j.apsusc.2009.04.001 ↗
33. Damage at hydrogenated amorphous/crystalline silicon interfaces by indium–tin oxide overlayer sputtering10.1063/1.4764529 ↗
34. Improvement of the open circuit voltage by modifying the transparent indium–tin oxide front electrode in amorphous n–i–p solar cells10.1002/pip.1220 ↗
35. R.A. Sinton, A. Cuevas, A quasi-steady-state open-circuit voltage method for solar cell characterization, in: Proceedings of the 16th European Photovoltaic Solar Energy Conference, Glasgow, UK, 2000.
36. A review and comparison of different methods to determine the series resistance of solar cells10.1016/j.solmat.2007.05.026 ↗
37. Contact resistance: its measurement and relative importance to power loss in a solar cell10.1109/T-ED.1984.21584 ↗
38. Wolfe · 1978
39. Record infrared internal quantum efficiency in silicon heterojunction solar cells with dielectric/metal rear reflectors10.1109/JPHOTOV.2013.2276484 ↗
40. Parameterization of free carrier absorption in highly doped silicon for solar cells10.1109/TED.2013.2262526 ↗
41. P.A. Basore, D.A. Clugston, PC1D version 4 for Windows: from analysis to design, in: Proceedings of the 25th IEEE Photovoltaic Specialists Conference, Washington DC, USA, 1996, pp. 377–381.10.1109/PVSC.1996.564023 ↗
42. Evolution of metal plating for silicon solar cell metallisation10.1002/pip.2221 ↗
43. Nature of doped a-Si:H/c-Si interface recombination10.1063/1.3129578 ↗
44. Role of front contact work function on amorphous silicon/crystalline silicon heterojunction solar cell performance10.1109/LED.2003.811405 ↗
45. Impact of the transparent conductive oxide work function on injection-dependent a-Si:H/c-Si band bending and solar cell parameters10.1063/1.4799042 ↗
46. Influence of a-Si:H/ITO interface properties on performance of heterojunction solar cells10.1016/j.egypro.2013.07.345 ↗
47. Influence of transparent conductive oxides on passivation of a-Si:H/c-Si heterojunctions as studied by atomic layer deposited Al-doped ZnO10.1088/0268-1242/29/12/122001 ↗
48. High-efficiency silicon heterojunction solar cells: a review10.1515/green-2011-0018 ↗