Study on the front contact mechanism of screen-printed multi-crystalline silicon solar cells
Source abstract
Abstract
Abstract The two key issues of front contact of screen-printed multi-crystalline silicon have been studied. Firstly, the effects of doping profiles in the emitter on the contact-resistance have been systematically investigated. Constant source diffusion is used to explain the doped phosphorus profile in the textured emitter by simulation. Secondly, the penetration mechanism of silver into SiNx layer was studied by using SEM and EDX to reveal the microstructure of the Ag/Si contact. A model has been proposed to explain the formation of the ohmic contact. It is found that the effectiveness of the contact is determined by the direct contact area of the silver crystallites to both the emitter and the finger. For a commercial multi-crystalline silicon solar cell of 156×156 mm2, the optimal contact-resistance of about 1.2 mΩ is suggested, corresponding to the doping sheet resistance of around 80–90 Ω/□. Multi-crystalline Si solar cells with excellent results, up to 18.51% in conversion efficiency, have been achieved. Moreover, to further understand the model, effects of the firing temperature and the thickness of SiNx layer on the contact-resistance have been investigated in the solar cells. It is proved that the formation of the silver crystallites is related to the existence of SiNx layer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Luque · 2003
2. Investigation of contact metallization systems for solar cells10.1149/1.2129575 ↗
3. D.L. Meier, R.B. Campbell, J.R. Davis, P. Rai-Choudhury, L.J. Sienkiewicz, Solar cell contacts, in: Proceedings of the 16th Photovoltaic Specialists Conference, 1982, pp. 904–910
4. Solar cell contact resistance – a review10.1109/T-ED.1984.21583 ↗
5. Electron tunneling and contact resistance of metal-silicon contact barriers10.1016/0038-1101(70)90056-0 ↗
6. Microstructural comparison of silicon solar cells’ front-side Ag contact and the evolution of current conduction mechanisms10.1063/1.3642956 ↗
7. Effect of glass frit chemistry on the physical and electrical properties of thick-film Ag contacts for silicon solar cells10.1007/s11664-006-0311-x ↗
8. Physical understanding of the behavior of silver thick-film contacts on n-type silicon under annealing conditions10.1016/j.solmat.2009.04.019 ↗
9. Effect of Ag particle size in thick film Ag paste on the electrical and physical properties of screen printed contacts and silicon solar cells10.1149/1.2126579 ↗
10. Silver thick-film contacts on highly doped n-type silicon emitters: structural and electronic properties of the interface10.1063/1.1562338 ↗
11. Physical understanding of printed thick-film front contacts of crystalline Si solar cells – review of existing models and recent developments10.1016/j.solmat.2006.03.040 ↗
12. Mechanism for the formation of Ag crystallites in the Ag thick-film contacts of crystalline Si solar cells10.1016/j.solmat.2008.10.021 ↗
13. Structural and electronic properties of silver/silicon interfaces and implications for solar cell performance10.1103/PhysRevB.83.235307 ↗
14. Yan · 2010
15. Sze · 2006
16. Green · 1982
17. Current transport in thick film Ag metallization: direct contacts at silicon pyramid tips?10.1063/1.3665718 ↗
18. Transmission electron microscope study of screen-printed Ag contacts on crystalline Si solar cells10.1149/1.3473812 ↗
19. Investigation of the mechanism of the Ag/SiNx firing-through process of screen-printed silicon solar cells10.1039/c4ra00072b ↗
20. Investigation of contact resistance between silicon and silver paste made by screen-printing10.1007/s10098-012-0566-2 ↗
21. Specific contact resistance measurements of the screen-printed Ag thick film contacts in the silicon solar cells by three-point probe methodology and TLM method