Effects of molten salt multi-thermophysical properties on performance of the latent heat thermal energy storage system and synergetic optimization investigation
Source abstract
Abstract
Molten salt is a typical PCM in solar thermal utilization, the disadvantage of low thermal conductivity has been improved by various methods. However, only enhancing the thermal conductivity can`t reach a satisfactory optimization goal. Aiming to improve the key thermal performance indexes of LHTES, multi-properties collaborative equivalent optimization is preliminarily presented here, which partly breaks the fixed mode of purely enhancing thermal conductivity. A numerical simulation model of a typical shell-and-tube storage tank was established, and a L 25(5 6 ) orthogonal simulation experiment was carried out. By evaluating the key thermal performance indexes and through range analysis, the influence laws and importance order of thermophysical properties are obtained. Moreover, the relationship between the key performance indexes and thermophysical properties is fitted, and a rough alternative optimization quantitative relationship is obtained. The results show that thermal conductivity and phase transition temperature have the greatest influence on almost all performance indexes at the early stage (1 h–1.5 h), and the specific heat capacity and latent heat gradually exceed them after 1.5 h. Compared with the stored exergy and stored heat energy during 4 h, the benefit from thermal conductivity enhancement during 2 h is nearly three and four times, respectively. Therefore, low thermal conductivity can be compensated by decreasing the phase change temperature in the case of fast energy storage process, while by increasing the specific heat capacity and latent heat in the case of slower one. After evaluating the feasibility and cost of adjusting each thermophysical property, the synergetic optimization scheme has more practical value.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Solar Thermal and Photovoltaic Systems · Adsorption and Cooling Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Performance enhancement of latent heat storage systems by using extended surfaces and porous materials: a state-of-the-art review [J]
2. Yu · 2021
3. Thermal conductivity enhancement on phase change materials for thermal energy storage: a review [J]10.1016/j.ensm.2019.10.010 ↗
4. Thermal behavior of paraffin-nano-Al2O3 stabilized by sodium stearoyl lactylate as a stable phase change material with high thermal conductivity [J]10.1016/j.renene.2015.11.043 ↗
5. Enhancement of phase change material (PCM) based latent heat storage system with nano fluid and wavy surface [J]10.1016/j.ijheatmasstransfer.2014.09.007 ↗
6. The experimental exploration of carbon nanofiber and carbon nanotube additives on thermal behavior of phase change materials [J]
7. Thermal energy storage and retrieval characteristics of a molten-salt latent heat thermal energy storage system [J]10.1016/j.apenergy.2016.04.012 ↗
8. High-performance thermally conductive phase change composites by large-size oriented graphite sheets for scalable thermal energy harvesting [J]10.1002/adma.201905099 ↗
9. Highly graphitized 3D network carbon for shape-stabilized composite PCMs with superior thermal energy harvesting [J]10.1016/j.nanoen.2018.03.075 ↗
10. Preparation and thermal energy storage properties of d-Mannitol/expanded graphite composite phase change material [J]10.1016/j.solmat.2016.06.003 ↗
11. Thermal performance enhancement of eutectic PCM laden with functionalised graphene nanoplatelets for an efficient solar absorption cooling storage system [J]
12. Review on the preparation and performance of paraffin-based phase change microcapsules for heat storage [J]10.1016/j.est.2021.103840 ↗
13. A review of nanomaterial incorporated phase change materials for solar thermal energy storage [J]10.1016/j.solener.2021.08.051 ↗
14. Effect of phase transition temperature and thermal conductivity on the performance of latent heat storage system [J]10.1016/j.applthermaleng.2018.02.036 ↗
15. Turning points emerging in the effect of thermal conductivity of phase change materials on utilization rate of latent heat in buildings [J]10.1016/j.renene.2021.07.129 ↗
16. New view point on the effect of thermal conductivity on phase change materials based on novel concepts of relative depth of activation and time rate of activation: the case study on a top floor room [J]10.1016/j.apenergy.2020.114886 ↗
17. Rate capability and Ragone plots for phase change thermal energy storage [J]10.1038/s41560-021-00778-w ↗
18. Investigation of the thermal performance of phase change material/mini-channel coupled battery thermal management system [J]10.1016/j.apenergy.2015.12.021 ↗
19. Effects of PCM thermophysical properties on thermal storage performance of a shell-and-tube latent heat storage unit [J]10.1016/j.apenergy.2016.06.140 ↗
20. Solidification enhancement of PCM in a triplex-tube thermal energy storage system with nanoparticles and fins [J]10.1016/j.apenergy.2017.11.082 ↗
21. Effective utilization of natural convection via novel fin design & influence of enhanced viscosity due to carbon nano-particles in a solar cooling thermal storage system [J]10.1016/j.solener.2019.03.005 ↗
22. Magnesium oxide nanoparticles dispersed solar salt with improved solid phase thermal conductivity and specific heat for latent heat thermal energy storage [J]10.1016/j.renene.2019.04.027 ↗
23. Nanofluid PCMs for thermal energy storage: latent heat reduction mechanisms and a numerical study of effective thermal storage performance [J]10.1016/j.ijheatmasstransfer.2014.07.051 ↗
24. Carbon nanoadditives to enhance latent energy storage of phase change materials [J]10.1063/1.2903538 ↗
25. Design of effective fins for fast PCM melting and solidification in shell-and-tube latent heat thermal energy storage through topology optimization [J]10.1016/j.apenergy.2017.10.050 ↗
26. Development of low-melting point molten salts and detection of solid-to-liquid transitions by alternative techniques to DSC [J]10.1016/j.solmat.2019.110107 ↗
27. Cascaded latent heat storage for parabolic trough solar power plants [J]10.1016/j.solener.2006.09.008 ↗
28. Preparation and thermal properties of sodium acetate trihydrate as a novel phase change material for energy storage [J]10.1016/j.energy.2018.10.164 ↗
29. Experimental study of cold storage characteristics of nanofluids as the phase change material [J]
30. Controlling the composition, phase volume, and viscosity of microemulsions with cosolvent [J]10.1016/j.fuel.2017.09.056 ↗