Corrosion of stainless steel 316 in a ternary nitrate salt and its composite with expanded graphite for solar thermal applications
Source abstract
Abstract
Abstract The most concern of using nitrate salt mixtures in a concentrated solar power plant is their corrosion to the working pipes and containers. This paper studied the corrosion behavior of stainless steel 316 in a ternary nitrate salt mixture at three different conditions using static corrosion method. The mass losses of each sample were carefully measured. The instantaneous and average corrosion rates were predicted. The surface and cross-sectional morphologies with the corrosion products of the 316SS coupons after the test were investigated using SEM (Scanning Electron Microscope) combined with EDS (Energy-dispersive X-ray spectroscopy) and XRD (X-ray Diffraction) analyses. The results showed that temperature is the main factor to affect the average corrosion rate, for example, 0.0032 mm/a at 300 °C and 0.016 mm/a at 500 °C during the test period. At 300 °C, adding 10 wt% EG can reduce the average corrosion rate by 20%. The cross-sectional morphologies revealed that the corrosion layer of 316SS coupon in the composite with 10 wt% EG was 1/3 thinner than that in pure salt mixture at 300 °C. That was because the CaCO3 phase formed by the reaction of Ca(NO3)2 and EG could work as a protective layer to prevent further corrosion to some extent.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solar Thermal and Photovoltaic Systems · Phase Change Materials Research · Thermography and Photoacoustic Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Concentrated solar power plants: review and design methodology10.1016/j.rser.2013.01.032 ↗
2. Corrsoion properties of a ternary nitrate/nitrite molten salt in concentrated solar technology10.1016/j.renene.2015.01.072 ↗
3. Heat transfer fluids for concentrating solar power systems- a review10.1016/j.apenergy.2015.01.125 ↗
4. Kenisarin. High-temperature phase change materials for thermal energy storage10.1016/j.rser.2009.11.011 ↗
5. Advanced heat transfer fluids for direct molten salt line-focusing CSP plants10.1016/j.pecs.2018.02.002 ↗
6. Thermophysical, environmental, and compatibility properties of nitrate and nitrite containing molten salts for medium temperature CSP applications: a critical review10.1016/j.jeurceramsoc.2018.07.057 ↗
7. Investigation of the Ca(NO3)2-NaNO3 mixture for latent heat storage10.1016/j.solmat.2015.04.005 ↗
8. Thermal characterization of binary sodium/lithium nitrate salts for latent heat storage at medium temperatures10.1016/j.solmat.2016.08.017 ↗
9. Thermal property characterization of a low melting-temperature ternary nitrate salt mixture for thermal energy storage systems10.1016/j.solmat.2011.07.029 ↗
10. Development of new molten salts with LiNO3 and Ca(NO3)2 for energy storage in CSP plants10.1016/j.apenergy.2013.12.061 ↗
11. Corrosion of stainless steels and carbon steel by molten mixtures of commercial nitrate salts10.1361/10599490417542 ↗
12. Corrosion behavior and mechanism of austenitic stainless steels in a new quaternary molten salt for concentrating solar power10.1016/j.solmat.2019.01.024 ↗
13. Corrosion of stainless steels and low-Cr steel in molten Ca(NO3)2-NaNO3-KNO3 eutectic salt for direct energy storage in CSP plant10.1016/j.solmat.2015.05.004 ↗
14. The effect of humidity, impurities and initial state on the corrosion of carbon and stainless steels in molten HitecXL salt for CSP plant10.1016/j.solmat.2017.08.026 ↗
15. High temperature corrosion in molten solar salt: the role of chloride impurities10.1002/maco.201609300 ↗
16. Corrosion behavior of 316H stainless steel in molten FLiNaK eutectic salt containing graphite particles10.1016/j.corsci.2019.108174 ↗
17. Development of medium-temperature composite phase change material with high thermal stability and conductivity10.1016/j.solmat.2016.06.027 ↗
18. A simple method for the inhibition of the corrosion of carbon steel by molten nitrate salt for thermal storage in concentrating solar power applications10.1038/s41529-018-0055-0 ↗
19. Spray-graphitization as a protection method against corrosion by molten nitrate salts and molten salts based nanofluids for thermal energy storage applications10.1016/j.solmat.2019.110024 ↗