Impact of rough substrates on hydrogen-doped indium oxides for the application in CIGS devices
Source abstract
Abstract
Indium oxide based transparent conductive oxides (TCOs) are promising contact layers in solar cells due to their outstanding electrical and optical properties. However, when applied in Cu(In,Ga)Se2 or Si-hetero-junction solar cells the specific roughness of the material beneath can affect the growth and the properties of the TCO. We investigated the electrical properties of hydrogen doped and hydrogen-tungsten co-doped indium oxides grown on rough Cu(In,Ga)Se2 samples as well as on textured and planar glass. At sharp ridges and V-shaped valleys crack-shaped voids form inside the indium oxide films, which limit the effective electron mobility of the In2O3:H and In2O3:H,W thin films. This was found for films deposited by magnetron sputtering and reactive plasma deposition at several deposition parameters, before as well as after annealing and solid phase crystallization. This suggests universal behavior that will have a wide impact on solar cell devices.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · ZnO doping and properties · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Hydrogen-doped In2O3 as high-mobility transparent conductive oxide10.1143/JJAP.46.L685 ↗
2. High mobility In2O3:h as contact layer for a-Si:H/c-Si heterojunction and μc-Si:H thin film solar cells10.1016/j.tsf.2015.03.022 ↗
3. In2O3-based transparent conducting oxide films with high electron mobility fabricated at low process temperatures
4. High mobility transparent conductive W-doped In2O3 thin films prepared at low substrate temperature and its application to solar cells10.1016/j.solmat.2013.11.030 ↗
5. High-mobility transparent conductive thin films of cerium-doped hydrogenated indium oxide10.7567/APEX.8.015505 ↗
6. Highly conductive and broadband transparent Zr-doped In2O3 as front electrode for solar cells10.1109/JPHOTOV.2018.2851306 ↗
7. Transparent and semitransparent conducting film deposition by reactive-environment, hollow cathode sputtering10.1116/1.1894423 ↗
8. High-mobility hydrogen-doped In2O3 transparent conductive oxide for a-Si:H/c-Si heterojunction solar cells10.1016/j.solmat.2008.09.047 ↗
9. Hydrogen-doped indium oxide/indium tin oxide bilayers for high-efficiency silicon heterojunction solar cells10.1016/j.solmat.2013.03.024 ↗
10. Cu(in, ga)se2 solar cells with amorphous in2o3-based front contact layers10.1021/acsami.7b07092 ↗
11. Direct comparison of atomic layer deposition and sputtering of In2O3:H used as transparent conductive oxide layer in CuIn1−xGaxSe2 thin film solar cells10.1016/j.solmat.2016.07.012 ↗
12. Nakamura · 2019
13. Understanding the cell-to-module efficiency gap in Cu(In, Ga)(S, Se)2 photovoltaics scale-up10.1038/s41560-018-0177-1 ↗
14. Influence of ZnO-based sub-layers on the growth of hydrogen doped indium oxide10.1021/acsaem.8b01039 ↗
15. Thinning of CIGS solar cells: Part I: Chemical processing in acidic bromine solutions10.1016/j.tsf.2010.12.219 ↗
16. Thinning of CIGS solar cells: Part II: Cell characterizations10.1016/j.tsf.2010.12.224 ↗
17. Microstructural properties of (In, Ga)2Se3 precursor layers for efficient CIGS thin-film solar cells10.1016/j.solmat.2008.11.028 ↗
18. Alternative etching for improved Cu-rich CuInSe2 solar cells10.1557/opl.2015.447 ↗
19. Current status of transparent conducting oxide layers with high electron mobility and their application in Cu(In, Ga)Se2 mini-modules10.1016/j.tsf.2019.01.024 ↗
20. High-performance perovskite/cu(in, ga)se2 monolithic tandem solar cells10.1126/science.aat5055 ↗
21. Elucidating the mechanism of an RbF post deposition treatment in CIGS thin film solar cells10.1002/solr.201800156 ↗
22. Impact of front contact layers on performance of Cu(In, Ga)Se2 solar cells in relaxed and metastable states10.1002/pip.3017 ↗
23. Very thin, highly-conductive ZnO:Al front electrode on textured glass as substrate for thin-film silicon solar cells10.1002/pssr.201308195 ↗
24. Atomic force microscopy characterization of znte epitaxial films
25. Interpretation of equilibrium and steady state hall and thermoelectric effects in inhomogeneous materials10.1063/1.1659188 ↗
26. The structure of a propagating MgAl2O4/MgO interface: linked atomic- and μm-scale mechanisms of interface motion10.1080/14786435.2016.1205233 ↗
27. Hydrogenated indium oxide window layers for high-efficiency Cu(In, Ga)Se 2 solar cells10.1063/1.4921445 ↗
28. Room-temperature deposition of transparent conducting Al-doped ZnO films by RF magnetron sputtering method10.1016/j.apsusc.2008.12.021 ↗
29. Room temperature deposition of Al-doped ZnO films on quartz substrates by radio-frequency magnetron sputtering and effects of thermal annealing10.1016/j.tsf.2010.07.048 ↗
30. Structural, electrical and optical properties of aluminum doped zinc oxide films prepared by radio frequency magnetron sputtering10.1063/1.365556 ↗
31. Carrier compensation induced by thermal annealing in Al-doped ZnO films10.3390/ma10020141 ↗
32. Damp heat stability of Al-doped zinc oxide films on smooth and rough substrates10.1016/j.tsf.2011.04.190 ↗
33. Quantitative analysis of ionization rates of depositing particles in reactive plasma deposition using mass-energy analyzer and Langmuir probe