Defect control based on constitutional supercooling effect in cast multicrystalline silicon: Boron-indium co-doping
Source abstract
Abstract
Abstract The impact of constitutional supercooling (CS) on the grain structure of cast multicrystalline silicon (mc-Si) materials was investigated. Indium impurity was chosen as the CS dopant because of its low equilibrium segregation coefficient so that CS effect could be obtained at relatively low doping concentration. Industrial indium (In) doped G2 and boron-indium (B–In) co-doped G5 seed-assisted multicrystalline silicon (mc-Si) ingots were fabricated and characterized. Self-nucleated grains and epitaxial grains could be obtained, respectively, as the result of tuning the doping amount of indium. Constitutional-supercooling-related defects (CSD) were found in the co-doped ingot and could suppress the growth and propagation of dislocation-type defects. As a result, the overall deleterious defect density of B–In co-doped mc-Si wafers was well reduced compared to that of referential B-doped wafers, and the average solar cell performance of B–In co-doped ingots was obviously enhanced.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Growth of structure-controlled polycrystalline silicon ingots for solar cells by casting10.1016/j.actamat.2006.03.014 ↗
2. Directional growth method to obtain high quality polycrystalline silicon from its melt10.1016/j.jcrysgro.2006.04.016 ↗
3. Crystal growth behaviors of silicon during melt growth processes10.1155/2012/169829 ↗
4. Arrangement of dendrite crystals grown along the bottom of Si ingots using the dendritic casting method by controlling thermal conductivity under crucibles10.1016/j.jcrysgro.2011.01.069 ↗
5. Development of high-performance multicrystalline silicon for photovoltaic industry10.1002/pip.2437 ↗
6. Seed-assisted cast quasi-single crystalline silicon for photovoltaic application: towards high efficiency and low cost silicon solar cells10.1016/j.solmat.2012.02.024 ↗
7. The characteristics of sub-grains in the mono-like silicon crystals grown with directional solidification method
8. Higher quality mono-like cast silicon with induced grain boundaries10.1016/j.solmat.2015.03.027 ↗
9. Hu · 2009
10. Hu · 2013
11. Seed-assisted growth of high-quality multi-crystalline silicon in directional solidification10.1016/j.jcrysgro.2013.09.051 ↗
12. Growth of multicrystalline silicon ingot with both enhanced quality and yield through quartz seeded method10.1016/j.jcrysgro.2015.11.020 ↗
13. Multicrystalline silicon crystal assisted by silicon flakes as seeds10.1016/j.solmat.2017.09.004 ↗
14. Multicrystalline silicon assisted by polycrystalline silicon slabs as seeds10.1016/j.solmat.2017.12.026 ↗
15. Recombination activity of Σ3 boundaries in boron-doped multicrystalline silicon: influence of iron contamination10.1063/1.1836009 ↗
16. Carrier recombination activity and structural properties of small-angle grain boundaries in multicrystalline silicon10.1143/JJAP.46.6489 ↗
17. Electron-beam-induced current study of small-angle grain boundaries in multicrystalline silicon10.1016/j.scriptamat.2005.03.010 ↗
18. Glicksman · 2011
19. On origin of equiaxed zone in castings
20. Crystal growth of indium-doped Czochralski silicon for photovoltaic application10.1143/JJAP.51.105501 ↗
21. Constitutional supercooling in Czochralski growth of heavily doped silicon crystals10.12693/APhysPolA.124.219 ↗
22. Constitutional supercooling during crystal growth from stirred melts—I: Theoretical10.1016/0038-1101(61)90078-8 ↗
23. Dislocation models of crystal grain boundaries10.1103/PhysRev.78.275 ↗
24. Recombination activity of sub-grain boundaries and dislocation arrays in quasi-single crystalline silicon