journal article·2019-09Open access

Influence of material migration on the mechanical integrity of inverted organic solar cells

Aurélien Tournebize, Dargie Deribew, Alberto Gregori, Roger C. Hiorns, Andreas Distler, Hans-Joachim Egelhaaf, Christine Lartigau-Dagron, Ahmed Allal, Agnès Rivaton, Heiko Peisert, Thomas Chassé

Abstract

We have identified modifications of material distributions in inverted organic solar cell structures during accelerated aging processes that are potentially linked to the loss of the mechanical integrity of the devices. Non-encapsulated devices were treated with ISOS-D-3 ageing (the so called damp heat exposure at 85 °C/85% room humidity in the dark). After performing pull-off tests, the exposed surfaces were analyzed by X-ray photoemission spectroscopy and atomic force microscopy. For fresh devices, the results revealed that mechanical failure occurs close to the PEDOT:PSS/P3HT:PCBM interface, in agreement with the literature. However, after a short exposure to damp heat, XPS investigations indicate an enrichment of PCBM at the PEDOT:PSS/P3HT:PCBM interface and a change in the 2 PEDOT:PSS surface composition. Both phenomena may explain the rapid drop in device performances and the increased tendency towards delamination.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Stability of polymer solar cells10.1002/adma.201104187 ↗
2. Influence of the hole-transport layer on the initial behavior and lifetime of inverted organic photovoltaics10.1016/j.solmat.2010.12.036 ↗
3. Water ingress in encapsulated inverted organic solar cells: correlating infrared imaging and photovoltaic performance10.1002/aenm.201501065 ↗
4. Degradation mechanisms in organic photovoltaic devices10.1016/j.orgel.2011.11.027 ↗
5. A study for degradation of flexible organic photovoltaic modules via damp-heat test: by accessing individual layers of the module10.1016/j.solmat.2015.08.037 ↗
6. Promising long-term stability of encapsulated ITO-free bulk-heterojunction organic solar cells under different aging conditions10.1016/j.solmat.2014.07.004 ↗
7. Comparison of degradation mechanisms in organic photovoltaic devices upon exposure to a temperate and a subequatorial climate10.1016/j.cplett.2015.09.023 ↗
8. Degradation of organic solar cells due to air exposure10.1016/j.solmat.2006.06.041 ↗
9. The role of donor polymer and PEDOT:PSS formulation on adhesion processes in inverted organic solar cells10.1016/j.solmat.2017.08.024 ↗
10. Dupont · 2012 · 003259
11. Interlayer adhesion in roll-to-roll processed flexible inverted polymer solar cells10.1016/j.solmat.2011.10.012 ↗
12. Thermal cycling effect on mechanical integrity of inverted polymer solar cells10.1016/j.solmat.2015.07.019 ↗
13. Decohesion kinetics of PEDOT:PSS conducting polymer films
14. Consensus stability testing protocols for organic photovoltaic materials and devices10.1016/j.solmat.2011.01.036 ↗
15. National Institutes of Health, Open Source under Title 17, Sect. 105 USA Code. (n.d.)..
16. Enhanced diode characteristics of organic solar cells using titanium suboxide electron transport layer
17. Correlating reduced fill factor in polymer solar cells to contact effects10.1063/1.2841062 ↗
18. Spatially resolved photocurrent measurements of organic solar cells: tracking water ingress at edges and pinholes10.1016/j.solmat.2012.10.027 ↗
19. Adhesion properties of inverted polymer solarcells: processing and film structure parameters
20. XPS of sulphide mineral Surfaces : metal-deficient , polysulphides , defects and elemental sulphur10.1002/(SICI)1096-9918(199908)28:1<101::AID-SIA627>3.0.CO;2-0 ↗
21. An XPS study of the early stages of silver photodiffusion in Ag/a-As2S3 films10.1016/j.jnoncrysol.2005.11.044 ↗
22. Investigation of the degradation mechanisms of a variety of organic photovoltaic devices by combination of imaging techniques - the ISOS-3 inter-laboratory collaboration10.1039/c2ee03508a ↗
23. Hintz · 2011 · 13373
24. Morphology evolution via self-organization and lateral and vertical diffusion in polymer:fullerene solar cell blends10.1038/nmat2102 ↗
25. Origin of the open circuit voltage of plastic solar cells10.1002/1616-3028(200110)11:5<374::AID-ADFM374>3.0.CO;2-W ↗
26. Bruner · 2014
27. Predicting morphologies of solution processed polymer:Fullerene blends10.1021/ja405493j ↗
28. Interdiffusion of PCBM and P3HT reveals miscibility in a photovoltaically active blend10.1002/aenm.201000023 ↗
29. The effect of polymer solubilizing side-chains on solar cell stability10.1039/C5CP01158B ↗
30. Degradation patterns in water and oxygen of an inverted polymer solar cell10.1021/ja106299g ↗