Incorporation of spatially-resolved current density measurements with photoluminescence for advanced parameter imaging of solar cells
Source abstract
Abstract
Abstract The spatial distribution of device performance parameters of solar cells provides important insight into their operation, including the type and magnitude of conversion losses and potential areas of improvement. In most of the procedures used to create these parameter images, a uniform (i.e., global) short-circuit current density (JSC) is usually assumed. However, JSC is known to vary over the surface of a solar cell, especially in polycrystalline absorber materials like multicrystalline silicon. In this work, a high speed quantum efficiency measurement rastered over the surface of a solar cell is used to obtain images of JSC. These JSC images are then used to calculate images of series resistance, dark saturation current density, fill factor, and conversion efficiency. Comparisons are made between the images created with a global JSC and with the spatially-resolved JSC. Negligible variation is observed in the series resistance and dark saturation current density images, but a drastic change is observed in the efficiency images between these two methods.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Photovoltaic System Optimization Techniques · solar cell performance optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. One shot mapping of minority carrier diffusion length in polycrystalline silicon solar cells using electroluminescence
2. Spatially resolved series resistance of silicon solar cells obtained from luminescence imaging10.1063/1.2709630 ↗
3. Advanced luminescence based effective series resistance imaging of silicon solar cells10.1063/1.2982588 ↗
4. Evaluating luminescence based voltage images of silicon solar cells10.1063/1.3443438 ↗
5. Comparison of DLIT- and PL-based local solar cell efficiency analysis10.1016/j.egypro.2013.07.243 ↗
6. Improved local efficiency imaging via photoluminescence for silicon solar cells10.1016/j.solmat.2014.01.003 ↗
7. Integration of spatially resolved ideality factor into local cell efficiency analysis with photoluminescence10.1016/j.solener.2017.10.006 ↗
8. Perimeter recombination characterization by luminescence imaging10.1109/JPHOTOV.2015.2480225 ↗
9. Short-circuit current density imaging via PL image evaluation based on implied voltage distribution10.1109/JPHOTOV.2014.2379097 ↗
10. Short-circuit current density imaging methods for silicon solar cells10.1016/j.egypro.2015.07.008 ↗
11. A new real-time quantum efficiency measurement system
12. Crystalline silicon device loss analysis through spatially resolved quantum efficiency measurements10.1109/JPHOTOV.2017.2689160 ↗
13. Novel high efficiency quadruple junction solar cell with current matching and quantum efficiency simulations10.1016/j.solener.2016.09.031 ↗
14. Photographic surveying of minority carrier diffusion length in polycrystalline silicon solar cells by electroluminescence10.1063/1.1978979 ↗
15. The impact of voltage independent carriers on implied voltage measurements on silicon devices10.1063/1.4965698 ↗
16. The effect of diffusion-limited lifetime on implied current voltage curves based on photoluminescence data10.1063/1.2756529 ↗
17. Voltage calibration of luminescence images of silicon solar cells10.1063/1.4862400 ↗
18. Imaging the local ideality factor by contactless photoluminescence measurement10.1063/1.4812835 ↗
19. Spatially resolved photoluminescence imaging of essential silicon solar cell parameters
20. Local analysis of the efficiency of solar cells based on dark lock-in thermography imaging
21. Local efficiency analysis of solar cells based on lock-in thermography10.1016/j.solmat.2012.07.019 ↗
22. Detailed performance loss analysis of silicon solar cells using high throughput metrology methods
23. A quasi-steady-state open-circuit voltage method for solar cell characterization
24. Fast and reliable calculation of the two-diode model without simplifications10.1002/pip.2301 ↗
25. Superposition and reciprocity in the electroluminescence and photoluminescence of solar cells10.1109/JPHOTOV.2011.2179018 ↗
26. A simple emitter model for quantum efficiency curves and extracting the emitter saturation current