A continuous, single-face wet texturing process for industrial multicrystalline silicon solar cells using a surfactant treated photoresist mask
Source abstract
Abstract
Abstract In this paper, a high-throughput continuous, single-face texturing method was introduced into the fabrication process for industrial multicrystalline silicon solar cell production. With a patterned photoresist film as the mask for the wet etching, wafers without back protection were transported by rollers and only the masked face could contact the etching solution and be etched through the mask openings. The first etching results indicated that serious heat aggregation and poor wettability of the acid solution on the mask surface resulted in a seriously uneven and uncontrolled etching reaction. However, after applying a surfactant to the photoresist mask to improve the mask's hydrophility, a stable and uniform etching reaction could be achieved. A honeycomb-like textured surface with a pitch of 18 µm was fabricated successfully. The etched pits had a nearly smooth spherical segment surface and a surface occupancy of 70%. This regular textured surface had a low in-plane average reflectivity of approximately 20% and greatly increased the carrier lifetime. Compared with multicrystalline silicon solar cells textured by conventional acid etching, the average efficiency increased from 18.31% to 18.57%. In addition, this texturing technique is expected to promote the application of diamond-wire cut multicrystalline silicon wafers in the future.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thin-Film Transistor Technologies · Silicon and Solar Cell Technologies · Nanowire Synthesis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Life cycle assessment of multicrystalline silicon photovoltaic cell production in China10.1016/j.solener.2016.04.013 ↗
2. Environmental influence assessment of China's multi-crystalline silicon (multi-Si) photovoltaic modules considering recycling process10.1016/j.solener.2016.12.038 ↗
3. Review of life cycle analyses and embodied energy requirements of single-crystalline and multi-crystalline silicon photovoltaic systems10.1016/j.rser.2015.12.241 ↗
4. High-performance and traditional multicrystalline silicon: comparing gettering responses and lifetime-limiting defects10.1109/JPHOTOV.2016.2540246 ↗
5. Relation between solar cell efficiency and crystal defect etching induced by acidic texturization on multicrystalline silicon material10.1016/j.solmat.2012.05.023 ↗
6. Efficiency improved by acid texturization for multi-crystalline silicon solar cells10.1016/j.solener.2010.10.020 ↗
7. Texturization of multicrystalline silicon by wet chemical etching for silicon solar cells10.1007/s10853-005-0583-1 ↗
8. Next-generation multi-crystalline silicon solar cells: diamond-wire sawing, nano-texture and high efficiency10.1016/j.solmat.2015.05.030 ↗
9. Texturization using metal catalyst wet chemical etching for multicrystalline diamond wire sawn wafer10.1016/j.solmat.2014.11.008 ↗
10. Texturing of SiC-slurry and diamond wire sawn silicon wafers by HF–HNO3–H2SO4 mixtures10.1016/j.solmat.2014.04.006 ↗
11. etc. Picosecond laser texturization of mc-silicon for photovoltaics: a comparison between 1064 nm, 532 nm and 355 nm radiation wavelengths Optoelectronic properties of Black-Silicon ICP mc-Si solar cell, radiation wavelengths10.1016/j.apsusc.2016.02.187 ↗
12. UV laser direct texturing for high efficiency multicrystalline silicon solar cell10.1016/j.apsusc.2012.10.035 ↗
13. Polycrystalline silicon solar cells with v-grooved surface10.1016/0927-0248(94)90043-4 ↗
14. Nanostructuring of c-Si surface by F2-based atmospheric pressure dry texturing process10.1002/pssa.201431372 ↗
15. 0.76% absolute efficiency increase for screen-printed multicrystalline silicon solar cells with nanostructures by reactive ion etching10.1016/j.solmat.2016.05.046 ↗
16. Optoelectronic properties of Black-Silicon generated through inductively coupled plasma (ICP) processing for crystalline siliconsolar cells10.1016/j.apsusc.2015.11.241 ↗
17. Antireflective ultra-fast nanoscale texturing for efficient multi-crystalline silicon solar cells10.1016/j.solener.2015.03.010 ↗
18. High efficiency multi-crystalline silicon solar cell with inverted pyramid nanostructure10.1016/j.solener.2016.12.007 ↗
19. High-efficient solar cells by the Ag/Cu-assisted chemical etching process on diamond-wire-sawn multicrystalline silicon10.1109/JPHOTOV.2016.2631304 ↗
20. Versatile strategies for improving the performance of diamond wire sawn mc-Si solar cells10.1016/j.solmat.2016.04.014 ↗
21. Honeycomb structure on multi-crystalline silicon al-bsf solar cell with 17.8% efficiency10.1109/JPHOTOV.2015.2402757 ↗
22. H. Hauser, B. Michl, S. Schwarzkopf, C. Müller, M. Hermle, B. Bläsi, Large-area honeycomb texturing of Si-solar cells via nanoimprint lithography, in: Proceedings of the 29th European PV Solar Energy Conference and Exhibition, Amsterdam, The Netherlands, 22–26 September 2014.
23. H. Hauser, P. Berger, B. Michl, C. Müller, S. Schwarzkopf, M. Hermle, B. Bläsi, Nanoimprint lithography for solar cell texturisation, Hugo Thienpont, P.Van Daele, J. Mohr, H. Zappe (Eds.), Proc. SPIE 7716, Micro-Optics 2010, 77160X-1. Available: http://dx.doi.org/10.1117/12.867350.10.1117/12.867350 ↗
24. O. Schultz, G. Emanuel, S.W. Glunz, G.P. Willeke, Texturing of multicrystalline silicon with acidic chemical wet etching and plasma etching, in: Proceedings of the 3rd World Conference on Photovoltaic Energy Conversion, IEEE, 2, 2003, pp. 1360–1363.
25. Broadband moth-eye antireflection coatings on silicon10.1063/1.2870080 ↗
26. A 19.8% efficient honeycomb multicrystalline silicon solar cell with improved light trapping10.1109/16.791985 ↗
27. 19.8% efficient ‘honeycomb’ textured multicrystalline and 24.4% monocrystalline silicon solar cells10.1063/1.122345 ↗
28. Large-size multi-crystalline silicon solar cells with honeycomb textured surface and point-contacted rear toward industrial production10.1016/j.solmat.2010.04.035 ↗
29. Optical performance analysis of inkjet-textured multicrystalline silicon solar cells using angular distribution matrices10.1016/j.solener.2015.05.030 ↗
30. Formation of a honeycomb texture for multicrystalline silicon solar cells using an inkjetted mask10.1002/pssr.201105422 ↗
31. A high efficiency industrial polysilicon solar cell with a honeycomb-like surface fabricated by wet etching using a photoresist mask10.1016/j.apsusc.2016.07.039 ↗
32. Nanostructure formation and passivation of large-area black silicon for solar cell applications10.1002/smll.201101792 ↗
33. Influence of the texturing structure on the properties of black silicon solar cell10.1016/j.solmat.2012.10.001 ↗
34. Dai · 2013
35. Investigation of acidic texturization for multicrystalline silicon solar cells10.1149/1.1391628 ↗
36. Precise test of the diffusion-controlled wet isotropic etching of silicon via circular mask openings10.1149/1.2217263 ↗
37. A numerical model wet isotropic etching of silicon molds for microlenses fabrication,”10.1149/2.079111jes ↗