Lowering firing temperature of a p-type passivated emitter rear contact Si solar cell via current injection
Source abstract
Abstract
Effective contact formation during low-temperature firing with applied current was investigated in this study. The screen-printed electrode was fired using rapid thermal annealing and contacted by etching the passivation layer and forming Ag crystallites. In our previous study, we proposed a method for reducing this contact resistance from 5 to 1 mΩ cm 2 by applying a current during the firing of a phosphorous-doped (P-doped) n + emitter in a p-type Si wafer without a silicon nitride (SiN x) passivation layer. According to the results, current application during the firing of Si solar cells should reduce the required firing temperature. Herein, a current (3 A) was applied between the screen-printed electrode and P-doped n + emitter in a p-type Si wafer with an SiN x passivation layer during low-temperature firing from 350 to 600 °C. The major effects of the proposed methods were a reduced contact resistance and enhanced of SiN x etching. Cross-sectional scanning electron microscopy images at different firing temperatures demonstrated that current injection during firing promoted the etching of the SiN x layer. Additionally, the method of current injection with low-temperature firing proposed in this work resulted in a device with a solar cell efficiency of 19.0%, which is similar to the efficiency of a reference cell fired at a higher temperature.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Silicon Nanostructures and Photoluminescence · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Influence of intrinsic silicon layer and intermediate silicon oxide Layer on the performance of inline PECVD deposited boron-doped TOPCon
2. Bifacial p-Type PERC Solar cell with efficiency over 22% using laser doped selective emitter10.3390/en13061388 ↗
3. A 22.3% Efficient p‐type back junction solar cell with an Al‐printed front‐side grid and a passivating n+ ‐type polysilicon on oxide contact at the rear side10.1002/solr.202000435 ↗
4. An industrially viable TOPCon structure with both ultra-thin SiOx and n+-poly-Si processed by PECVD for p-type c-Si solar cells10.1016/j.solmat.2019.109926 ↗
5. Mass production of p-type Cz silicon solar cells approaching average stable conversion efficiencies of 22 %10.1016/j.egypro.2017.09.308 ↗
6. 2021 · 1
7. Implementation and understanding of p+ fired rear hole selective tunnel oxide passivating contacts enabling >22% conversion efficiency in p-type c-Si solar cells10.1016/j.solmat.2020.110809 ↗
8. Pathway towards 24% efficiency for fully screen-printed passivated emitter and rear contact solar cells10.1088/1361-6463/abe900 ↗
9. Numerical study of mono-crystalline silicon solar cells with passivated emitter and rear contact configuration for the efficiency beyond 24% based on mass production technology10.1088/1674-4926/41/6/062701 ↗
10. Studying knotless screen patterns for fine-line screen printing of Si-solar cells10.1109/JPHOTOV.2019.2959939 ↗
11. Improving wall slip behavior of silver pastes on screen emulsions for fine line screen printing10.1016/j.solmat.2019.109969 ↗
12. Influence of the SiO2 interlayer thickness on the density and polarity of charges in Si/SiO2/Al2O3 stacks as studied by optical second-harmonic generation10.1063/1.4857075 ↗
13. Physical understanding of the behavior of silver thick-film contacts on n-type silicon under annealing conditions10.1016/j.solmat.2009.04.019 ↗
14. Transmission electron microscope study of screen-printed Ag contacts on crystalline Si solar cells10.1149/1.3473812 ↗
15. Progress in p‐type tunnel oxide‐passivated contact solar cells with screen‐printed contacts10.1002/solr.202100152 ↗
16. TOPCon solar cells: laser ablation and contact formation strategies
17. Reduction in contact resistivity of Ag thick-film conductor on SiN x -coated Si wafer for solar cell using lead tellurite glass frit10.35848/1347-4065/abaebb ↗
18. Effect of the thermal properties of frits on the electrical properties of screen-printed silicon solar cells
19. Silver thick-film contacts on highly doped n-type silicon emitters: structural and electronic properties of the interface10.1063/1.1562338 ↗
20. Impact of excess phosphorus doping and Si crystalline defects on Ag crystallite nucleation and growth in silver screen-printed Si solar cells10.1002/pip.2440 ↗
21. Mechanism underlying the beneficial effect of forming gas annealing on screen-printed Ag contacts of crystalline Si solar cells10.1016/j.actamat.2014.02.023 ↗
22. Evaluation of industrially relevant parameters for contact firing of screen printed front side silver contacts10.1016/j.egypro.2013.07.341 ↗
23. Screen printing metallization of boron emitters10.1002/pip.933 ↗
24. Role of the ambient oxygen on the silver thick-film contact formation for crystalline silicon solar cells10.1016/j.cap.2009.11.054 ↗
25. Role of PbO-based glass frit in Ag thick-film contact formation for crystalline Si solar cells10.1007/s12540-009-0307-1 ↗
26. Electrochemical nature of contact firing reactions for screen-printed silicon solar cells: origin of “gray finger” phenomenon10.1002/pip.2783 ↗
27. Thermal properties of glass frit and effects on Si solar cells10.1016/j.matchemphys.2008.09.011 ↗
28. Optimization of lead- and cadmium-free front contact silver paste formulation to achieve high fill factors for industrial screen-printed Si solar cells10.1016/j.solmat.2009.01.003 ↗
29. The formation mechanism for printed silver-contacts for silicon solar cells10.1038/ncomms11143 ↗
30. High-temperature contact formation on n-type silicon: basic reactions and contact model for seed-layer contacts10.1002/adfm.200901305 ↗
31. Physical understanding of printed thick-film front contacts of crystalline Si solar cells—review of existing models and recent developments10.1016/j.solmat.2006.03.040 ↗
32. Gunnar Schubert · 2002
33. Thermodynamic study on the Ag-Pb-O system at 1273 K10.2320/matertrans.46.1861 ↗
34. Activity coefficient of AgO0.5 in the PbO-SiO2 melt at 1273 K10.2320/matertrans.MRA2006251 ↗
35. Mechanism for the formation of Ag crystallites in the Ag thick-film contacts of crystalline Si solar cells10.1016/j.solmat.2008.10.021 ↗
36. Influence of oxygen on Ag ionization in molten lead borosilicate glass during screen-printed Ag contact formation for Si solar cells10.1016/j.electacta.2013.05.109 ↗
37. Effective contact formation method on high-sheet-resistance boron-doped emitter with current Injection10.1109/JPHOTOV.2019.2896984 ↗
38. Effects of current-injection firing with Ag paste in a boron emitter10.1038/srep21553 ↗
39. Effects of surface morphology on Ag crystallite formation in screen-printed multi-crystalline Si solar cells10.1016/j.mssp.2021.105759 ↗
40. Evolutionary PERC+ solar cell efficiency projection towards 24% evaluating shadow-mask-deposited poly-Si fingers below the Ag front contact as next improvement step10.1016/j.solmat.2020.110586 ↗
41. Experimental evidence of direct contact formation for the current transport in silver thick film metallized silicon emitters10.1063/1.3665718 ↗
42. The nature of screen printed front side silver contacts - results of the project MikroSol10.1016/j.egypro.2013.11.085 ↗
43. Microstructure beneath screen-printed silver contacts and its correlation to metallization-induced recombination parameters10.1016/j.solmat.2021.111182 ↗
44. Correlation between the open-circuit voltage and recombination loss at metal-silicon interfaces of crystalline silicon solar cells10.1016/j.solmat.2020.110519 ↗