journal article·2021-10Open access

Accelerated aging tests to selective solar absorber coatings for low temperature applications

Teresa C. Diamantino, Rita Gonçalves, Soraia Páscoa, Isabel N. Alves, M. João Carvalho

Abstract

Abstract The need of a higher role of solar energy within the energy mix in the coming decades obliges the collectors to increase their performance and reliability. It is demanded that the solar absorbers, as the key component of solar thermal collectors, should be low cost with high efficiency for extended lifetimes under different kinds of environments. Commercially, there are presently two main types of solutions as selective solar absorbers coatings for low temperature applications: coatings obtained by physical vapour deposition (PVD) and by paint coatings (PC). These coatings present different physical and chemical characteristics. Therefore, it is important to know how these commercial coatings degrade over time in different environments. Results obtained with two different PVD coatings and three PC, under different accelerated aging tests, are presented. The aging tests performed included different environmental stress corrosion conditions: temperature, humidity, chlorides, sulfur dioxide and nitrogen oxides. The chlorides and the gases SO2 and NO2 affect distinctly the different selective coatings. Cyclic variation of corrosion promoting gases (sulfur dioxide and nitrogen dioxide), higher humidity, salt spraying and drying seem to be an aging test that reflects the different environments where the solar thermal collectors are exposed. In addition to the contaminants, drying/wetting cycles also play an important role in degradation mechanisms of absorber coatings. So, the international standard ISO 22975-3 needs to be revised to include cyclic conditions with these contaminants.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solar Thermal and Photovoltaic Systems · Solar Energy Systems and Technologies · Photovoltaic System Optimization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. Renewable energy policies in a time of transition
2. (International Energy Agency – Solar Heating and Cooling Programme) · 2020
3. Roberge · 2019
4. Degradation effects of maritime atmosphere on metallic components of solar collectors10.1016/j.solmat.2015.12.011 ↗
5. Mapping atmospheric corrosion in coastal regions: methods and results10.1117/1.JPE.2.022003 ↗
6. Diamantino
7. Leygraf · 2016
8. Kohl · 2004
9. Environmental effects on materials: the effect of the air pollutants SO2, NO2, NO and O3 on the corrosion of copper, zinc and aluminium. A short literature survey and results of laboratory exposures10.1016/S0010-938X(97)00047-4 ↗
10. The Parameters of Atmospheric Corrosion
11. S. Zhang et al., ‘Effect of coastal atmospheric corrosion on fatigue properties of 2024-T4 aluminum alloy structures’, J. Alloys Compd., vol. 802, pp. 511–521, Sep. 2019, doi: 10.1016/j.jallcom.2019.06.235.10.1016/j.jallcom.2019.06.235 ↗
12. Air quality status and trends in Europe10.1016/j.atmosenv.2014.09.017 ↗
13. Effect of NO2 on the atmospheric corrosion of metals10.3323/jcorr1974.34.11_612 ↗
14. Direct and indirect air pollution effects on materials including cultural monuments10.1007/BF00483697 ↗
15. Atmospheric corrosion of materials
16. The effect of nitrogen oxides in atmospheric corrosion of metals10.1016/0010-938X(94)00136-T ↗
17. A laboratory study of the effect of NO2 on the atmospheric corrosion of zinc10.1016/j.atmosenv.2007.07.022 ↗
18. Influence of gaseous pollutants and their synergistic effects on the aging of reflector materials for concentrating solar thermal technologies10.1016/j.solmat.2019.109955 ↗
19. 2013
20. Lifetime prediction of aluminum solar mirrors by correlating accelerated aging and outdoor exposure experiments10.1016/j.solener.2018.09.006 ↗
21. Damage assessment of the corrosion-resistant performances for organic coating systems after accelerated tests using analytic hierarchy process10.1016/j.engfailanal.2018.06.015 ↗
22. Durability studies of solar reflectors used in concentrating solar thermal technologies under corrosive sulfurous atmospheres10.3390/su10093008 ↗
23. Comparison and evaluation of accelerated aging tests for reflectors10.1016/j.egypro.2014.03.181 ↗
24. Review of accelerated ageing test modelling and its application to solar mirrors10.1016/j.solmat.2018.06.024 ↗
25. Degradation mechanisms and non-linear thermal cycling effects in a high-temperature light-absorber coating10.1016/j.solmat.2020.110719 ↗
26. Solar thermal harvesting based on self-doped nanocermet: structural merits, design strategies and applications10.1016/j.rser.2020.110277 ↗
27. ‘Developments in the synthesis of flat plate solar selective absorber materials via sol–gel methods: a review’10.1016/j.rser.2014.04.062 ↗
28. Solar energy absorption mediated by surface plasma polaritons in spectrally selective dielectric-metal-dielectric coatings: a critical review10.1016/j.rser.2017.05.062 ↗
29. A review on analysis and development of solar flat plate collector10.1016/j.rser.2016.09.078 ↗
30. Achievements in mid and high-temperature selective absorber coatings by physical vapor deposition (PVD) for solar thermal Application-A review10.1016/j.jallcom.2020.155510 ↗
31. Corrosion protection of Sunselect, a spectrally selective solar absorber coating, by (3-mercaptopropyl)trimethoxysilane10.1016/j.solmat.2009.05.023 ↗
32. A review on surface control of thermal radiation by paints and coatings for new energy applications10.1016/j.rser.2012.01.046 ↗
33. Adhesion and thermal stability of thickness insensitive spectrally selective (TISS) polyurethane-based paint coatings on copper substrates10.1016/j.solmat.2008.12.026 ↗
34. Photothermal conversion applications of the transition metal (Cu, Mn, Co, Cr, and Fe) oxides with spinel structure
35. L. Slemenik Perše, M. Mihelčič, and B. Orel, ‘Rheological and optical properties of solar absorbing paints with POSS-treated pigments’, Mater. Chem. Phys., vol. 149–150, pp. 368–377, Jan. 2015, doi: 10.1016/j.matchemphys.2014.10.031.10.1016/j.matchemphys.2014.10.031 ↗
36. The impact of a silane pigment treatment on the properties of thickness-sensitive spectrally selective paints10.17344/acsi.2017.3637 ↗
37. A review of high-temperature selective absorbing coatings for solar thermal applications10.1016/j.jmat.2019.12.012 ↗
38. Alves · 2020
39. 2014
40. ‘Degradation of selective solar absorber surfaces in solar thermal collectors – an EIS study’10.1016/j.solmat.2016.10.015 ↗
41. Comparison between predicted and actually observed in-service degradation of a nickel pigmented anodized aluminium absorber coating for solar DHW systems10.1016/S0927-0248(99)00112-9 ↗
42. Durability of different selective solar absorber coatings in environments with different corrosivity10.1016/j.solmat.2017.03.004 ↗
43. ‘Solar thermal collector's degradation – influence of corrosivity inside and outside the collectors'
44. Selective absorber coatings qualification - ISO 22975:2014 full application
45. The applicability of accelerated life testing for assessment of service life of solar thermal components10.1016/j.solmat.2004.01.046 ↗
46. ‘Influence of maritime/industrial atmosphere on solar thermal collector's degradation’
47. Carvalho · 2020
48. A figure of merit for selective absorbers in flat plate solar water heaters10.1016/j.solener.2013.10.012 ↗
49. Heller · 2017
50. ISO 21207 · 2015
51. 2017
52. 2019
53. ISO 14993 · 2018
54. ISO 9226 · 2012
55. ISO 8407 · 2009
56. A laboratory study of the initial stages of the atmospheric corrosion of zinc in the presence of NaCl; Influence of SO2 and NO210.1016/0010-938X(93)90096-Y ↗
57. Influence of ppb levels of SO2 on the atmospheric corrosion of aluminum in the presence of NaCl10.1149/1.2008977 ↗
58. L. Mariaca, D. de la Fuente, S. Feliu, J. Simancas, J. A. González, and M. Morcillo, ‘Interaction of copper and NO2: effect of joint presence of SO2, relative humidity and temperature’, J. Phys. Chem. Solid., vol. 69, no. 4, pp. 895–904, Apr. 2008, doi: 10.1016/j.jpcs.2007.10.003.10.1016/j.jpcs.2007.10.003 ↗
59. Assessment of durability of solar absorbers - performance criterion
60. ISO 9223 · 2012
61. Effect of sealing on characteristics of nano-porous aluminum oxide as black selective coatings