Chemical degradation in Thermally Cycled Stainless Steel 316 with High-Temperature Phase Change Material
Source abstract
Abstract
Abstract Analysis of stainless steel 316 as a containment material in the presence of a phase change material (PCM) cycled at high temperature was carried out through a combination of X-ray photoelectron spectroscopy and X-ray diffraction methods. In this work, stainless steel tokens were half-immersed in a chloride carbonate-based PCM, which were then thermally cycled in an air or a nitrogen environment up to 500 times, allowing the PCM to repeatedly transform between solid and liquid phases. Spectroscopy and diffraction methods were applied on the tokens, as well as the cycled PCM, to investigate the extent and nature of corrosion in such steel alloys. With varying sputtering conditions, the oxidation state at different depths of token surfaces was quantified. From the outermost corroded layer through to the bulk, this study shows a gradual change in distribution in both Cr and oxidation of Fe, while Cr was specifically found to have depleted and migrated into the PCM. The oxidation and depletion have been found to increase with increasing exposure time to PCM while sigma-phase structure embrittled in the corrosion layer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Solar Thermal and Photovoltaic Systems · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Durability studies of solar reflectors: a review10.1016/j.rser.2016.04.060 ↗
2. Heat transfer fluids for concentrating solar power systems – a review10.1016/j.apenergy.2015.01.125 ↗
3. Corrosion behaviour of carbon materials exposed to molten lithium chloride–potassium chloride salt10.1016/j.carbon.2013.10.040 ↗
4. Thermal analysis of Al–Si alloys as high-temperature phase-change material and their corrosion properties with ceramic materials10.1016/j.apenergy.2015.10.164 ↗
5. Novel solid–solid phase-change cascade systems for high-temperature thermal energy storage10.1016/j.solener.2018.10.085 ↗
6. Role of copper/vanadium on the optoelectronic properties of reactive RF magnetron sputtered NiO thin films10.1007/s13204-018-0784-y ↗
7. Misra · 1987
8. Thermal energy storage using chloride salts and their eutectics10.1016/j.applthermaleng.2016.07.046 ↗
9. Materials selection of steam-phase change material (PCM) heat exchanger for thermal energy storage systems in direct steam generation facilities10.1016/j.solmat.2016.10.010 ↗
10. Characterisation of promising phase change materials for high temperature thermal energy storage
11. High-temperature phase change materials for thermal energy storage10.1016/j.rser.2009.11.011 ↗
12. Review on storage materials and thermal performance enhancement techniques for high temperature phase change thermal storage systems10.1016/j.rser.2012.01.020 ↗
13. Corrosion of a stainless steel and nickel-based alloys in high temperature supercritical carbon dioxide environment10.1016/j.corsci.2012.11.041 ↗
14. Corrosion of annealed AISI 316 stainless steel in sodium environment10.1016/S0022-3115(98)00041-5 ↗
15. Effects of temperature and partial pressure of CO/O2 on corrosion behaviour of stainless-steel in molten LirNa carbonate salt10.1016/S0378-7753(00)00376-1 ↗
16. Corrosion resistance of alumina-forming alloys against molten chlorides for energy production. I: Pre-oxidation treatment and isothermal corrosion tests10.1016/j.solmat.2017.02.019 ↗
17. Evaluation of corrosion resistance of A516 Steel in a molten nitrate salt mixture using a pilot plant facility for application in CSP plants10.1016/j.solmat.2016.12.002 ↗
18. Effects of laser peening on stress corrosion cracking (SCC) of ANSI 304 austenitic stainless steel10.1016/j.corsci.2012.03.044 ↗
19. Hot corrosion studies of boiler steels exposed to different molten salt mixtures at 950 °C10.1016/j.engfailanal.2019.02.013 ↗
20. Corrosion behaviors of 316 stainless steel and Inconel 625 alloy in chloride molten salts for solar energy storage10.1515/htmp-2020-0077 ↗
21. Elevated temperature molten salt corrosion study of SS304L austenitic boiler steel
22. Study of material Compatibility for a thermal energy storage system with phase change material10.3390/en11030572 ↗
23. Investigation into the behaviour of aluminium and steel under melt/freeze cyclic conditions10.1016/j.est.2018.03.001 ↗
24. A eutectic salt high temperature phase change material: thermal stability and corrosion of SS316 with respect to thermal cycling10.1016/j.solmat.2017.05.047 ↗
25. Determination of thermo-physical properties and stability testing of high-temperature phase-change materials for CSP applications10.1016/j.solmat.2015.03.014 ↗
26. Corrosion of steel alloys in eutectic NaCl+Na 2 CO 3 at 700 °C and Li 2 CO 3 + K 2 CO 3 + Na 2 CO 3 at 450 °C for thermal energy storage10.1016/j.solmat.2017.05.063 ↗
27. Stress assisted oxidative failure of Inconel 601 for thermal energy storage10.1016/j.solmat.2016.10.008 ↗
28. Investigation on Ti6Al4V-V-Cr-Fe-SS316 Multi-layers metallic structure Fabricated by laser 3D Printing10.1038/s41598-017-08580-z ↗
29. Sigma phase in Superduplex stainless steel: formation, Kinetics and Microstructural Path10.1590/1980-5373-mr-2016-0436 ↗
30. A eutectic salt high temperature phase change material: thermal stability and corrosion of SS316 with respect to thermal cycling10.1016/j.solmat.2017.05.047 ↗
31. Molecular structure of 3-Aminopropyltriethoxysilane layers formed on Silanol-Terminated Silicon surfaces10.1021/jp212056s ↗
32. Detection of sigma phase in 22% Cr duplex stainless steel by electrochemical methods10.1134/S1023193510100034 ↗
33. Nanocrystalline cerium oxide prepared from a carbonate precursor and its ability to breakdown biologically relevant organophosphates
34. Investigation of multiplet splitting of Fe 2p XPS spectra and bonding in iron compounds10.1002/sia.1984 ↗
35. Nanocrystalline Fe-Fe2O3 particle-deposited N-doped graphene as an activity-modulated Pt-free electrocatalyst for oxygen reduction reaction10.1039/C5NR04929F ↗
36. Bimetallic metal–organic framework derived FeO/TiO2 embedded in mesoporous carbon nanocomposite for the sensitive electrochemical detection of 4-nitrophenol10.1016/j.snb.2018.11.083 ↗
37. Interaction between austein-ferrite phases on passive performance of 2205 duplex stainless steel10.1016/j.jmst.2018.02.020 ↗
38. Thickness determination of corrosion layers on iron using XPS depth profiling10.17222/mit.2016.180 ↗
39. Green one-pot synthesis of flowers-like Fe3O4/rGO hybrid nanocomposites for effective electrochemical detection of riboflavin and low-cost supercapacitor applications10.1016/j.snb.2017.06.126 ↗
40. Binderless, free-Standing Porous Interconnects of Ni-Fe alloy Decorated Reduced graphene oxide for oxygen Evolution reaction10.1021/acs.langmuir.6b02413 ↗
41. Ni-loaded nanocrystalline ceria-zirconia solid solutions prepared via modified Pechini route as stable to coking catalysts of CH4 dry reforming10.1515/chem-2016-0039 ↗
42. In situ growth of NiO nanoparticles on carbon paper as a cathode for rechargeable Li–O2 batteries10.1039/C7RA02932B ↗
43. Mesoporous high surface area NiO synthesized with soft templates: Remarkable for catalytic CH4 deep oxidation10.1016/j.mcat.2017.08.005 ↗
44. Cr2O3/carbon nanosheet composite with enhanced performance for lithium ion batteries10.1039/C7RA06188A ↗
45. Charge competition with oxygen molecules determines the growth of gold particles on doped CaO films10.1039/c3fd20130a ↗
46. Pecheva · 2009 · 403
47. XPS study of titanium species exposed to molten Li2CO3-Na2CO3 in the anodic conditions used in molten carbonate fuel cells
48. A photoelectron spectroscopy study of lava stones10.1039/C3AY40136G ↗
49. Investigation of sodium insertion into tetracyanoquinodimethane (TCNQ): results for a TCNQ thin film obtained by a surface science approach10.1039/C5CP06659J ↗
50. N. Israelsson, reportHigh Temperature Oxidation and Chlorination of FeCrAl Alloys, (Thesis).
51. Effective tube-in-tank PCM thermal storage for CSP applications, Part 1: impact of tube configuration on discharging effectiveness10.1016/j.solener.2015.09.042 ↗
52. Effective tube-in-tank PCM thermal storage for CSP applications, Part 2: Parametric assessment and impact of latent fraction10.1016/j.solener.2015.09.034 ↗
53. Liu · 2018 · 195
54. Colour performance investigation of a Cr2O3 green pigment prepared via the thermal decomposition of CrOOH10.1016/j.ceramint.2013.08.107 ↗
55. Preparation of high quality Microgranulate CrO3 based on green process design10.1002/cjce.22764 ↗
56. Depth sensitive X-ray diffraction as a probe of buried half-metallic inclusions
57. Formulation and Characterization of Cr2O3 doped ZnO Thick films as H2S gas Sensor
58. Experimental research on the corrosion of X series pipeline steels under alternating current interference10.1016/j.engfailanal.2017.03.003 ↗
59. Compatibility of steel No. 1.4970 with liquid sodium at high temperatures10.1016/S0022-3115(03)00073-4 ↗
60. Carburization behavior of AISI 316LN austenitic stainless steel – experimental studies and modeling10.1016/j.jnucmat.2010.05.023 ↗