Corrosion interface formation in thermally cycled stainless steel 316 with high-temperature phase change material
Source abstract
Abstract
Abstract The formation and mechanism that drive corrosion in stainless steel as a containment material in the presence of phase change materials is of importance in solar thermal energy storage systems. In our work, half-immersed stainless steel 316 tokens in a carbonate-based phase change material (PCM 638) have been investigated. The samples were thermally cycled in air and Nitrogen environment up to 500 times within a high-temperature range, allowing the PCM to transform between solid and liquid states repeatedly. As a consequence of thermal cycling, severe thickness loss on steel token was observed, indicating a degree of oxidation occurring, which depleted the uncorroded steel. Cross-sectional microstructural analysis was carried out to determine the elemental distribution and structural morphology along the corrosion layers. This study shows that thermal cycling of SS 316 in PCM results in active Ni and Cr migration to the surface, leading to a significant depletion of Cr from steel moving into the PCM. Cr and Fe on the surface are found to oxidise with varying degrees, with respect to the exposure time. The depletion of Cr was found to be higher in SS 316 immersed in PCM, while also increasing with exposure time.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Solar Thermal and Photovoltaic Systems · Nanofluid Flow and Heat Transfer
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Durability studies of solar reflectors: a review10.1016/j.rser.2016.04.060 ↗
2. Heat transfer fluids for concentrating solar power systems – a review10.1016/j.apenergy.2015.01.125 ↗
3. Corrosion behaviour of carbon materials exposed to molten lithium chloride–potassium chloride salt10.1016/j.carbon.2013.10.040 ↗
4. Thermal analysis of Al–Si alloys as high-temperature phase-change material and their corrosion properties with ceramic materials10.1016/j.apenergy.2015.10.164 ↗
5. Novel solid–solid phase-change cascade systems for high-temperature thermal energy storage10.1016/j.solener.2018.10.085 ↗
6. Murphy · 2019
7. Role of copper/vanadium on the optoelectronic properties of reactive RF magnetron sputtered NiO thin films10.1007/s13204-018-0784-y ↗
8. Misra · 1987
9. Thermal energy storage using chloride salts and their eutectics10.1016/j.applthermaleng.2016.07.046 ↗
10. Materials selection of steam-phase change material (PCM) heat exchanger for thermal energy storage systems in direct steam generation facilities10.1016/j.solmat.2016.10.010 ↗
11. Corrosion of a stainless steel and nickel-based alloys in high temperature supercritical carbon dioxide environment10.1016/j.corsci.2012.11.041 ↗
12. Corrosion of annealed AISI 316 stainless steel in sodium environment10.1016/S0022-3115(98)00041-5 ↗
13. Effects of temperature and partial pressure of CO/O2 on corrosion behaviour of stainless-steel in molten LirNa carbonate salt10.1016/S0378-7753(00)00376-1 ↗
14. Corrosion resistance of alumina-forming alloys against molten chlorides for energy production. I: pre-oxidation treatment and isothermal corrosion tests10.1016/j.solmat.2017.02.019 ↗
15. Evaluation of corrosion resistance of A516 Steel in a molten nitrate salt mixture using a pilot plant facility for application in CSP plants10.1016/j.solmat.2016.12.002 ↗
16. Effects of laser peening on stress corrosion cracking (SCC) of ANSI 304 austenitic stainless steel10.1016/j.corsci.2012.03.044 ↗
17. Analysis of CREVONA sodium loop material10.1016/S0022-3115(02)01593-3 ↗
18. Investigation into the behaviour of aluminium and steel under melt/freeze cyclic conditions10.1016/j.est.2018.03.001 ↗
19. A eutectic salt high temperature phase change material: thermal stability and corrosion of SS316 with respect to thermal cycling10.1016/j.solmat.2017.05.047 ↗
20. Determination of thermo-physical properties and stability testing of high-temperature phase-change materials for CSP applications10.1016/j.solmat.2015.03.014 ↗
21. Thermophysical properties of low cost lithium nitrate salts produced in northern Chile for thermal energy storage10.1016/j.renene.2016.08.052 ↗
22. Study of corrosion by Ddynamic Gravimetric Analysis (DGA) methodology. Influence of chloride content in solar salt10.1016/j.solmat.2016.07.027 ↗
23. Kruizenga · 2012 · 7594
24. A simple method for the inhibition of the corrosion of carbon steel by molten nitrate salt for thermal storage in concentrating solar power applications
25. In-situ SEM study of transverse cracking and delamination in laminated composite materials10.1016/j.compscitech.2014.10.012 ↗
26. Black enamel for concentrated solar-power receivers10.1016/j.ceramint.2014.05.046 ↗
27. Corrosion of steel alloys in eutectic NaCl+Na2CO3 at 700 °C and Li2CO3+K2CO3+Na2CO3 at 450 °C for thermal energy storage10.1016/j.solmat.2017.05.063 ↗
28. Effect of Cr2O3 addition on corrosion mechanism of refractory castables for waste melting furnaces and concurrent formation of hexavalent chromium10.1016/j.ceramint.2017.10.207 ↗
29. Chromium oxide coatings with the potential for eliminating the risk of chromium ion release in orthopaedic implants10.1098/rsos.170218 ↗
30. Wear and corrosion resistance of Cr2O3%-40%TiO2 coating on gray cast-iron by plasma spray technique10.1088/2053-1591/ab2fb7 ↗
31. Corrosion resistance of Cr2O3-Al2O3 ceramics by molten sodium sulphate–vanadium pentoxide10.1023/A:1012941129678 ↗
32. The role of grain boundaries in the initial oxidation behavior of austenitic stainless steel containing alloyed Cu at 700°C for advanced thermal power plant applications10.1016/j.corsci.2015.03.014 ↗
33. Mechanistic understanding of the temperature dependence of crack growth rate in alloy 600 and 316 stainless steel through high-resolution characterization10.1016/j.actamat.2018.11.039 ↗
34. The effect of temperature on the preferential intergranular oxidation susceptibility of alloy 60010.1007/s11661-018-4491-9 ↗
35. Study of oxide protective layers on stainlesssteel by AES, EDS and XPS10.1002/sia.2718 ↗