journal article·2020-09

Efficient Cu2ZnSn(Se,S)4 solar cells with 79% fill factor using two-step annealing

Rujun Sun, Daming Zhuang, Ming Zhao, Ning Zhang, Qianming Gong, Yaowei Wei, Guoan Ren, Yixuan Wu, Jinquan Wei

Publisher page

Abstract

Abstract CZTSeS absorbers were prepared by two-step annealing under Ar carried H2Se gas, namely, annealing holding at 400 °C then at 560 °C. The additional holding results in a more compact morphology, same microstructure of phases and higher emission energy of CZTSeS absorbers. The FF as high as 79% has been achieved by improving Rsh, together with the contributions of Rs as low as 0.1 Ω·cm2 and a ohmic contact. This work highlights great potential for sputtering processing based on quaternary target and demonstrates that fill factor of 79% can be experimentally achieved in CZTSeS solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Kesterites - a challenging material for solar cells10.1002/pip.2156 ↗
2. Electrical and optical-properties of stannite-type quaternary semiconductor thin films10.1143/JJAP.27.2094 ↗
3. Preparation and evaluation of Cu2ZnSnS4 thin films by sulfurization of E-B evaporated precursors10.1016/S0927-0248(97)00119-0 ↗
4. Development of CZTS-based thin film solar cells10.1016/j.tsf.2008.11.002 ↗
5. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
6. How small amounts of Ge modify the formation pathways and crystallization of kesterites10.1039/C7EE02318A ↗
7. Cu2ZnSnSe4 thin-film solar cells by thermal co-evaporation with 11.6% efficiency and improved minority carrier diffusion length10.1002/aenm.201401372 ↗
8. 11.2% efficient solution processed kesterite solar cell with a low voltage deficit10.1002/aenm.201500712 ↗
9. Lithium-doping inverts the nanoscale electric field at the grain boundaries in Cu2ZnSn(S,Se)(4) and increases photovoltaic efficiency10.1039/C5CP04707B ↗
10. Complex interplay between absorber composition and alkali doping in high-efficiency kesterite solar cells
11. Beyond 11% efficient sulfide kesterite Cu2ZnxCd1–xSnS4 solar cell: effects of cadmium alloying10.1021/acsenergylett.7b00129 ↗
12. Beyond 11% efficient Cu2ZnSn(Se,S)4 thin film solar cells by cadmium alloying10.1016/j.solmat.2017.09.043 ↗
13. Improvement of voltage deficit of Ge-incorporated kesterite solar cell with 12.3% conversion efficiency10.7567/APEX.9.102301 ↗
14. A band-gap-graded CZTSSe solar cell with 12.3% efficiency10.1039/C6TA01558A ↗
15. Impact of buffer layer on kesterite solar cells
16. Engineering of interface band bending and defects elimination via a Ag-graded active layer for efficient (Cu,Ag)2ZnSn(S,Se)4 solar cells10.1039/C7EE01405H ↗
17. Cu2ZnSnSSe4 solar cells with 9.6% efficiency via selenizing Cu-Zn-Sn-S precursor sputtered from a quaternary target10.1016/j.solmat.2017.08.011 ↗
18. Cu2ZnSnS4 ceramic target: determination of sintering temperature by TG-DSC10.1016/j.ceramint.2016.03.048 ↗
19. High-sulfur Cu2ZnSn(S,Se)4 films by sulfurizing as-deposited CZTSe film: the evolutions of phase, crystallinity and S/(S+Se) ratio10.1016/j.jallcom.2016.11.335 ↗
20. Sintering dense nanocrystalline ceramics without final-stage grain growth10.1038/35004548 ↗
21. A two-stage annealing strategy for crystallization control of CH3NH3 PbI3 films toward highly reproducible perovskite solar cells
22. Limiting effects of conduction band offset and defect states on high efficiency CZTSSe solar cell10.1016/j.nanoen.2017.12.031 ↗
23. Raman scattering quantitative analysis of the anion chemical composition in kesterite Cu2ZnSn(SxSe1-x)4 solid solutions10.1016/j.jallcom.2014.12.175 ↗
24. Band tailing and efficiency limitation in kesterite solar cells, Appl
25. Diode quality factor determination for thin-film solar cells10.1016/0379-6787(89)90050-1 ↗
26. Influence of S/Se ratio on series resistance and on dominant recombination pathway in Cu2ZnSn(SSe)4 thin film solar cells10.1016/j.tsf.2012.11.111 ↗
27. A detrimental reaction at the molybdenum back contact in Cu2ZnSn(S,Se)(4) thin-film solar cells10.1021/ja308862n ↗
28. Effects of back contact instability on Cu2ZnSnS4 devices and processes10.1021/cm4015223 ↗
29. A temporary barrier effect of the alloy layer during selenization: tailoring the thickness of MoSe2 for efficient Cu2ZnSnSe4 solar cells10.1002/aenm.201402178 ↗
30. Fill factor losses in Cu2ZnSn(Sx,Se1-x)4 solar cells: insights from physical and electrical characterization of devices and exfoliated films10.1002/aenm.201501609 ↗
31. Achieving 11.95% efficient Cu2ZnSnSe4 solar cells fabricated by sputtering a Cu-Zn-Sn-Se quaternary compound target with a selenization process10.1039/C9TA00385A ↗
32. Photoluminescence emission and Raman response of monolayer MoS210.1364/OE.21.004908 ↗
33. Growth of alloy MoS2xSe2(1–x) nanosheets with fully tunable chemical compositions and optical properties10.1021/ja500069b ↗
34. Loss mechanisms in hydrazine-processed Cu2ZnSn(Se,S)4 solar cells10.1063/1.3522884 ↗
35. Hydrazine-processed Ge-substituted CZTSe solar cells10.1021/cm302881g ↗
36. Modeling the back contact of Cu2ZnSnSe4 solar cells10.1109/JPHOTOV.2016.2576678 ↗
37. Engineering of effective back-contact barrier of CZTSe: nanoscale Ge solar cells – MoSe2 defects implication10.1016/j.solener.2019.10.042 ↗
38. Role of contact work function, back surface field, and conduction band offset in Cu2ZnSnS4 solar cell10.7567/JJAP.57.08RC05 ↗
39. Kesterite thin-film solar cells: advances in materials modelling of Cu2ZnSnS410.1002/aenm.201100630 ↗