Low-voltage modulated inorganic smart windows using solid polymer electrolyte
Source abstract
Abstract
Abstract We have developed a low-voltage modulated inorganic electrochromic device using a solid polymer electrolyte (SPE). UV-cured electrolytes with various ferrocene (Fc) concentrations of 0, 0.05, and 0.1 M were developed. The electrochromic evaluation of the device using an Fc concentration of 0.1 M indicated high transmittance changes of >60% under a low potential change of 2.5 V due to the Fc in the electrolyte assisting with ion transfer to thin films, resulting in the lowest resistance within the device. Moreover, this electrochromic device, with an excellent self-bleaching effect, showed improved transmittance by 37% for 2000 s. We have fabricated a large smart window with a size of 20 × 20 cm2 using the optimized conditions, with stable cyclic transmittance change up to 100 cycles upon a potential change of 2.5 V. Therefore, an electrochromic device with high transmittance difference and stable switching performance was successfully demonstrated using 0.1 M Fc-based SPE.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Conducting polymers and applications · Transition Metal Oxide Nanomaterials · Analytical Chemistry and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Next-generation multifunctional electrochromic devices10.1021/acs.accounts.6b00183 ↗
2. Review on electrochromic property for WO3 thin films using different deposition techniques
3. Electrochromic dynamic windows for office buildings10.1016/j.ijsbe.2012.09.001 ↗
4. Highly stable and flexible ITO-free electrochromic films with bi-functional stacked MoO3/Ag/MoO3 structures10.1016/j.electacta.2015.12.115 ↗
5. Electrochromo-supercapacitor based on direct growth of NiO nanoparticles10.1016/j.nanoen.2014.12.031 ↗
6. Novel fabrication of an electrochromic antimony-doped tin oxide film using a nanoparticle deposition system10.1016/j.apsusc.2016.03.170 ↗
7. Low-cost fabrication of WO3 films using a room temperature and low-vacuum air-spray based deposition system for inorganic electrochromic device applications10.1016/j.tsf.2015.05.070 ↗
8. Synthesis, assembly, and electrochromic properties of uniform crystalline WO3 nanorods10.1021/jp804035r ↗
9. Controlled synthesis of WO3 nanorods and their electrochromic properties in H2SO4 electrolyte10.1021/jp901650v ↗
10. Electrochromic devices based on tungsten oxide films with honeycomb-like nanostructures and nanoribbons array10.1016/j.solmat.2017.06.009 ↗
11. Dual electrochromic film based on WO3/polyaniline core/shell nanowire array10.1016/j.solmat.2013.11.015 ↗
12. Characterization of PLD grown WO3 thin films for gas sensing10.1016/j.apsusc.2017.03.212 ↗
13. Solution-processed metal oxide thin film nanostructures for water splitting photoelectrodes: a review
14. Single-crystal tungsten oxide nanosheets: photochemical water oxidation in the quantum confinement regime10.1021/cm203293j ↗
15. Cubic WO3 stabilized by inclusion of Ti: applicable in photochromic glazing10.1016/j.solmat.2016.04.041 ↗
16. Room Temperature UV treated WO3 thin films for electrochromic devices on paper substrate10.1016/j.electacta.2014.02.028 ↗
17. An UV photochromic memory effect in proton-based WO3 electrochromic devices10.1063/1.3029775 ↗
18. WO3-Based electrochromic distributed bragg reflector: toward electrically tunable microcavity luminescent device10.1002/adom.201700791 ↗
19. High-contrast and fast electrochromic switching enabled by plasmonics10.1038/ncomms10479 ↗
20. Mechanistic insights into the coloration, evolution, and degradation of NiOx electrochromic anodes10.1021/acs.inorgchem.8b00793 ↗
21. Life-cycling and uncovering cation-trapping evidence of a monolithic inorganic electrochromic device: glass/ITO/WO3/LiTaO3/NiO/ITO10.1039/C8NR02267D ↗
22. Performance requirements for electrochromic smart window10.1016/j.jobe.2015.07.002 ↗
23. Layer-by-Layer assembly of PEDOT:PSS and WO3 nanoparticles: enhanced electrochromic coloration efficiency and mechanism studies by scanning electrochemical microscopy10.1016/j.electacta.2015.05.147 ↗
24. Low-voltage, simple WO3-based electrochromic devices by directly incorporating an anodic species into the electrolyte10.1039/C6TC03463B ↗
25. Solution processable, electrochromic ion gels for sub-1 V, flexible displays on plastic10.1021/acs.chemmater.5b00026 ↗
26. High-efficiency dye-sensitized solar cells with ferrocene-based electrolytes10.1038/nchem.966 ↗
27. Electrochemical characterisation of a lithium-ion battery electrolyte based on mixtures of carbonates with a ferrocene-functionalised imidazolium electroactive ionic liquid10.1039/c3cp50560j ↗
28. All-in-One gel-based electrochromic devices: strengths and recent developments10.3390/ma11030414 ↗
29. Electrochromic thin-film components for information representation systems10.1088/1757-899X/151/1/012005 ↗
30. Fabrication of an automatic color-tuned system with flexibility using a dry deposited photoanode10.1007/s40684-018-0067-9 ↗
31. Investigation of dry-deposited ion storage layers using various oxide particles to enhance electrochromic performance10.1016/j.solmat.2017.10.001 ↗
32. Effect of scanning speed on copper line deposition using nanoparticle deposition system (NPDS) for direct printing technology10.1080/02786826.2012.730645 ↗
33. Electrochemical performance of few-layer graphene nano-flake supercapacitors prepared by the vacuum kinetic spray method10.3390/coatings8090302 ↗
34. An electrochromic device based on Prussian blue, self-immobilized vinyl benzyl viologen, and ferrocene10.1016/j.solmat.2015.11.044 ↗
35. Polymers with pendant ferrocenes10.1039/C6CS00196C ↗