A quasi-ordered bulk heterojunction of P3HT/PCBM solar cells fabricated by zone-casting
Source abstract
Abstract
In this paper, a quasi-ordered bulk hetertojunction of P3HT/PCBM solar cells (Q-O BHJ device) was fabricated by zone-casting from the solutions with different aging times. P3HT nanofibers aligned in an oriented manner due to the shear stress and solute concentration gradient during zone-casting process. The orientation degree of P3HT nanofibers increased when the aging time of solution was prolonged. Meanwhile, P3HT had a high crystallinity due to the slow evaporation rate of solvent during the filmforming process. The oriented alignment of nanofibers could facilitate the connection between nanofibers by increasing the bridging chains. Furthermore, the bridging chains tended to adopt an untwisted conformation, which results in a reduced energy barrier of hole transfer. As a consequence, the Q-O BHJ device had a higher fill factor (FF) and short-circuit current density (I) compared with the device fabricated by spin coating (BHJ device), leading to an increase by almost more than 50% in device efficiency and a PCE of 3.26% without any annealing treatment. Published by Elsevier B.V.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Large-area roll-to-roll and roll-to-plate nanoimprint lithography: a step toward high-throughput application of continuous nanoimprinting10.1021/nn9003633 ↗
2. Flexible substrates as basis for photocatalytic reduction of carbon dioxide10.1016/j.solmat.2011.06.040 ↗
3. Bulk heterojunction solar cells with large open-circuit voltage: electron transfer with small donor-acceptor energy offset10.1002/adfm.201000971 ↗
4. Printed metal back electrodes for R2R fabricated polymer solar cells studied using the LBIC technique10.1016/j.solmat.2010.11.007 ↗
5. Two-layer organic photovoltaic cell10.1063/1.96937 ↗
6. On the importance of morphology control in polymer solar cells10.1002/marc.201000080 ↗
7. All solution roll-to-roll processed polymer solar cells free from indium-tin-oxide and vacuum coating steps10.1016/j.orgel.2009.03.009 ↗
8. Stability comparison:APCDTBT/PC71BM bulk-heterojunctionversus a P3HT/PC71BM bulk-heterojunction10.1016/j.solmat.2012.02.005 ↗
9. Enhanced device performance of organic solar cells via reduction of the crystallinity in the donor polymer10.1039/c0jm00664e ↗
10. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
11. Charge mobility and transport behavior in the ordered and disordered states of the regioregular poly(3-hexylthiophene)10.1021/jp904841j ↗
12. Anisotropy of charge transport in a uniaxially aligned and chain-extended, high-mobility, conjugated polymer semiconductor10.1002/adfm.201001781 ↗
13. Transport in polycrystalline polymer thin-film transistors10.1103/PhysRevB.71.165202 ↗
14. Volume morphology of printable solar cells10.1016/S1369-7021(10)70182-6 ↗
15. Three-dimensional nanoscale organization of bulk heterojunction polymer solar cells. nano letters10.1021/nl8014022 ↗
16. Controlling morphology in polymer–fullerene mixtures10.1002/adma.200701519 ↗
17. Effect of poly (3-hexylthiophene) nanofibrils on charge separation and transport in polymer bulk heterojunction photovoltaic cells10.1021/jp9038286 ↗
18. Charge-transport anisotropy due to grain boundaries in directionally crystallized thin films of regioregular poly(3-hexylthiophene)10.1002/adma.200802722 ↗
19. Uniaxial alignment of the columnar super-structure of a hexa (alkyl) hexa-peri-hexabenzocoronene on untreated glass by simple solution processing10.1021/ja028945z ↗
20. Zone casting—a universal method of preparing oriented anisotropic layers of organic materials
21. Oriented poly(3-hexylthiophene) nanofibril with the pi–pi stacking growth direction by solvent directional evaporation10.1021/la105109t ↗
22. Constructing thin polythiophene film composed of aligned lamellae via controlled solvent vapor treatment10.1021/la803470u ↗
23. Epitaxial growth of highly oriented fibers of semiconducting polymers with a shish-kebab-like superstructure10.1002/adfm.200900966 ↗
24. Backbone arrangement in friction-transferred regioregular poly(3-alkylthiophene)s10.1021/ma025887t ↗
25. P3HT/PCBM bulk heterojunction solar cells: impact of blend composition and 3D Morphology on device performance10.1002/adfm.200902247 ↗
26. Precise construction of PCBM aggregates for polymer solar cells via multi-step controlled solvent vapor annealing10.1039/B917533D ↗
27. The mechanisms for introduction of n-dodecylthiol to modify the P3HT/PCBM morphology10.1016/j.orgel.2010.01.017 ↗
28. High efficiency polymer solar cells via sequential inkjet-printing of PEDOT:PSS and P3HT:PCBM inks with additives10.1016/j.orgel.2010.06.007 ↗
29. Different structures and crystallinities of poly(3-hexylthiophene) films prepared from aged solutions10.1016/j.colsurfa.2011.03.003 ↗
30. Determination of the P3HT:PCBM solubility parameters via a binary solvent gradient method: impact of solubility on the photovoltaic performance10.1016/j.solmat.2012.01.005 ↗
31. Influence of molecular weight distribution on the gelation of P3HT and its impact on the photovoltaic performance10.1021/ma9005445 ↗
32. Solubility-driven polythiophene nanowires and their electrical characteristics10.1039/C0JM03114C ↗
33. The formation of different structures of poly(3-hexylthiophene) film on a patterned substrate by dip coating from aged solution10.1088/0957-4484/21/14/145303 ↗
34. Gel Processing for highly oriented conjugated polymer films10.1021/ma8020739 ↗
35. Aggregation and gelation effects on the performance of poly(3-hexylthiophene)/fullerene solar cells10.1021/ma801368z ↗
36. Solvent annealing effect in polymer solar cells based on poly(3-hexylthiophene) and methanofullerenes10.1002/adfm.200600624 ↗
37. Space-charge limited photocurrent10.1103/PhysRevLett.94.126602 ↗
38. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
39. Enhanced thermal stability and efficiency of polymer bulk-heterojunctioin solar cells by low-temperature drying of the active layer10.1002/adfm.200901807 ↗
40. Effect of alkyl side-chain length on photovoltaic properties of poly(3-alkylthiophene)/PCBM bulk heterojunctions10.1002/adfm.200900797 ↗