Process development and integration of double-side Poly-Si passivated solar cells with printed contacts via LPCVD and ex-situ tube diffusion
Source abstract
Abstract
Abstract Tunnel oxide passivated contact (TOPCon) solar cells incorporate doped polycrystalline silicon (poly-Si) thin films to promote charge carrier selectivity and supress recombination, and thus enable very high efficiency. So far, most of TOPCon cells only adopt poly-Si at rear side applications due to its absorptive natures. In this work, we have developed suitable n+ and p+ poly-Si layers via low pressure chemical vapor deposition (LPCVD) and tube diffusion for ex-situ doping. With proper process integration, the fabricated double-side poly-Si solar cells consist of ~20 nm n+ poly-Si grown at front textured surface and ~150 nm p+ poly-Si at rear planar surface. An excellent implied open-circuit voltage (iVoc) of 725 mV with a total J0 value of 16.3 fA/cm2 were obtained on cell precursors capped and hydrogenated by SiNx. We also demonstrated solar cell fabrication and metallisation via industry-viable screen printing, which eliminates the use of transparent conductive oxide (TCO). The phosphosilicate glass (PSG) is found as the key point that determines the firing stabilities. The champion cell implemented with fire-through contacts shows a proof-of-concept efficiency of 19.6% over an area of 196 cm2, which is comparable with the reference cell metallised with the help of a tin-doped indium oxide (ITO) layer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Development of the PERC solar cell10.1109/JPHOTOV.2019.2899460 ↗
2. A roadmap toward 24% efficient PERC solar cells in industrial mass production10.1109/JPHOTOV.2017.2749007 ↗
3. Passivating contacts and tandem concepts: approaches for the highest silicon-based solar cell efficiencies10.1063/1.5139202 ↗
4. Passivating contacts for crystalline silicon solar cells10.1038/s41560-019-0463-6 ↗
5. n-Type Si solar cells with passivating electron contact: identifying sources for efficiency limitations by wafer thickness and resistivity variation10.1016/j.solmat.2017.05.042 ↗
6. Tunnel oxide passivated contacts as an alternative to partial rear contacts10.1016/j.solmat.2014.06.015 ↗
7. Passivating contacts for crystalline silicon solar cells: from concepts and materials to prospects10.1109/JPHOTOV.2018.2797106 ↗
8. Laser contact openings for local poly-Si-metal contacts enabling 26.1%-efficient POLO-IBC solar cells10.1016/j.solmat.2018.06.020 ↗
9. Separating the two polarities of the POLO contacts of an 26.1%-efficient IBC solar cell10.1038/s41598-019-57310-0 ↗
10. Solar cell efficiency tables (version 56)10.1002/pip.3303 ↗
11. Design rules for high-efficiency both-sides-contacted silicon solar cells with balanced charge carrier transport and recombination losses10.1038/s41560-021-00805-w ↗
12. Mass production of industrial tunnel oxide passivated contacts (i-TOPCon) silicon solar cells with average efficiency over 23% and modules over 345 W10.1002/pip.3180 ↗
13. Approaching 23% with large-area monoPoly cells using screen-printed and fired rear passivating contacts fabricated by inline PECVD10.1002/pip.3097 ↗
14. Material properties of LPCVD processed n-type polysilicon passivating contacts and its application in PERPoly industrial bifacial solar cells10.1016/j.egypro.2017.09.250 ↗
15. 24.58% total area efficiency of screen-printed, large area industrial silicon solar cells with the tunnel oxide passivated contacts (i-TOPCon) design10.1016/j.solmat.2019.110258 ↗
16. n-PERT solar cells with passivated contact technology based on LPCVD polysilicon and fire-through contact metallization
17. Development of TOPCon tunnel-IBC solar cells with screen-printed fire-through contacts by laser patterning10.1016/j.solmat.2020.110834 ↗
18. Development of ultra-thin doped poly-Si via LPCVD and ex-situ tube diffusion for passivated contact solar cell applications10.1016/j.solmat.2020.110458 ↗
19. Double-Sided passivated contacts for solar cell applications: an industrially viable approach toward 24% efficient large area silicon solar cells
20. Crystalline silicon solar cells with coannealed electron- and hole-selective SiCx passivating contacts10.1109/JPHOTOV.2018.2866189 ↗
21. Building blocks for industrial, screen-printed double-side contacted POLO cells with highly transparent ZnO:Al layers
22. Ultra-thin poly-Si layers: passivation quality, utilization of charge carriers generated in the poly-Si and application on screen-printed double-side contacted polycrystalline Si on oxide cells10.1002/solr.202000177 ↗
23. Implantation-based passivating contacts for crystalline silicon front/rear contacted solar cells10.1002/pip.3250 ↗
24. Role of polysilicon in poly-Si/SiOx passivating contacts for high-efficiency silicon solar cells10.1039/C9RA03560E ↗
25. On the recombination behavior of p+-type polysilicon on oxide junctions deposited by different methods on textured and planar surfaces10.1002/pssa.201700058 ↗
26. Role of silicon surface, polished <100> and <111> or textured, on the efficiency of double-sided TOPCon solar cells10.1002/pip.3304 ↗
27. Efficient carrier-selective p- and n-contacts for Si solar cells10.1016/j.solmat.2014.05.039 ↗
28. SiO2-passivated high efficiency silicon solar cells: process dependence of Si-SiO2 interface recombination
29. On the hydrogenation of Poly-Si passivating contacts by Al2O3 and SiNx thin films10.1016/j.solmat.2020.110592 ↗
30. Impact of nonuniform illumination and probe bar shading on solar cell I–V measurement10.1109/JPHOTOV.2017.2726558 ↗