Mixed metal oxides as optically-passive ion storage layers in electrochromic devices based on metallopolymers
Source abstract
Abstract
Abstract Electrochromic devices (ECDs) based on iron metallopolymers (Fe-MEPE) and different oxide-based ion storage electrodes on fluorine-doped tin oxide (FTO)-coated glass as transparent, conductive substrates are investigated in detail. Titanium-manganese oxide (TMO) thin film electrodes deposited by reactive magnetron co-sputtering on FTO glass were compared to commercially available titanium-vanadium oxide (TiVOx) for use as optically-passive ion storage layers. The ECDs with Fe-MEPE combined with TiVOx (coloration efficiency η = 2 cm2 C−1 at 584 nm) and Ti-rich TMO (η = −4 cm2 C−1) are blue-purple in the dark state at 0 V and become highly transmissive when 1.5 V is applied with a visible light transmittance (τv) change from 28% to 69% and 21% to 57% in 3 s and 13 s, respectively. The ECDs show fast responses and high reversibility over more than 100 cycles. The combination of Fe-MEPE and Mn-rich TMO (η = −24 cm2 C−1) leads to a dark brown ECD, which can be brightened at 2.5 V (τv: 4% ↔17%, 9 s for decoloring).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Transition Metal Oxide Nanomaterials · Conducting polymers and applications · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. 2015
2. Granqvist · 1995
3. Gasochromic smart window: optical and thermal properties, energy simulation and feasibility analysis10.1016/j.solmat.2015.09.029 ↗
4. 2006
5. Performance, materials and coating technologies of thermochromic thin films on smart windows10.1016/j.rser.2013.05.038 ↗
6. Electrochromic applications10.1016/0921-5107(91)90104-4 ↗
7. Properties, requirements and possibilities of smart windows for dynamic daylight and solar energy control in buildings: a state-of-the-art review10.1016/j.solmat.2009.08.021 ↗
8. Metal-oxide films for electrochromic applications: present technology and future directions10.1039/c0jm00604a ↗
9. Electrochromics for smart windows: thin films of tungsten oxide and nickel oxide, and devices based on these10.1039/B612174H ↗
10. Electrochromic smart windows: energy efficiency and device aspects10.1007/s10008-002-0313-4 ↗
11. Electrochromic materials10.1146/annurev-matsci-062910-100344 ↗
12. Properties, requirements and possibilities of smart windows for dynamic daylight and solar energy control in buildings: a state-of-the-art review10.1016/j.solmat.2009.08.021 ↗
13. Smart electrochromic windows to enhance building energy efficiency and visual comfort10.3390/en13061449 ↗
14. Electrochromics for smart windows: oxide-based thin films and devices10.1016/j.tsf.2014.02.002 ↗
15. Stimuli-responsive metallo-supramolecular polymer films: design, synthesis and device fabrication10.1039/C4TC00689E ↗
16. Three-dimensional Fe(II)-based metallo-supramolecular polymers with electrochromic properties of quick switching, large contrast, and high coloration efficiency10.1021/am5010859 ↗
17. A green copper-based metallo-supramolecular polymer: synthesis, structure, and electrochromic properties, Chem10.1002/asia.201200668 ↗
18. Multi-colour electrochromic properties of Fe/Ru-based bimetallo-supramolecular polymers10.1039/c3tc30440j ↗
19. Metallosupramolecular polyelectrolytes self-assembled from various pyridine ring-substituted bisterpyridines and metal ions: photophysical, electrochemical, and electrochromic properties10.1021/ja710380a ↗
20. Metallo-Supramolecular polymers based on functionalized bis-terpyridines as novel electrochromic materials10.1002/adma.200700931 ↗
21. State-of-the-art electrochromic materials based on metallo-supramolecular polymers10.1016/j.solmat.2014.03.032 ↗
22. A panchromatic electrochromic device composed of Ru(ii )/Fe(ii )-based heterometallo-supramolecular polymer10.1039/C9TC01452G ↗
23. Sub-second electrochromic switching and ultra-high coloration efficiency in halloysite nanoclay incorporated metallo-supramolecular polymer nano-hybrid based electrochromic device10.1016/j.solmat.2019.110392 ↗
24. Electrochromic metallo-supramolecular polymers showing visible and near-infrared light transmittance modulation10.1016/j.solmat.2019.110001 ↗
25. A study of the effect of pyridine linkers on the viscosity and electrochromic properties of metallo-supramolecular coordination polymers10.1039/C7TC04177B ↗
26. Detailed study of layer-by-layer self-assembled and dip-coated electrochromic thin films based on metallo-supramolecular polymers10.1021/la501590a ↗
27. From the bottom up--flexible solid state electrochromic devices10.1002/adma.201402771 ↗
28. Oxide electrochromics: an introduction to devices and materials10.1016/j.solmat.2011.08.021 ↗
29. Electrochromic tungsten oxide films: review of progress 1993–199810.1016/S0927-0248(99)00088-4 ↗
30. Low pressure CVD of electrochromic WO3 at 400°C10.1149/2.0281509jes ↗
31. The electrochromic properties of sputtered nickel oxide films10.1016/0927-0248(92)90075-Z ↗
32. Nickel oxide electrochromic thin films prepared by reactive DC magnetron sputtering10.1143/JJAP.34.2440 ↗
33. Properties of NiOx and its influence upon all-thin-film ITO/NiOx/LiTaO3/WO3/ITO electrochromic devices prepared by magnetron sputtering10.1016/j.vacuum.2014.09.007 ↗
34. Contrast limitations of dual electrochromic systems10.1016/j.elecom.2007.10.004 ↗
35. Using WO 3 as a transparent, optically-passive counter electrode in an unbalanced electrochromic configuration10.1016/j.elecom.2016.09.001 ↗
36. Electrochromic properties of mixed oxides based on titanium and niobium for smart window applications10.1016/j.surfcoat.2016.11.078 ↗
37. In operando XAFS experiments on flexible electrochromic devices based on Fe(II)-metallo-supramolecular polyelectrolytes and vanadium oxide10.1016/j.solmat.2015.10.015 ↗
38. High electrochromic performance of co-sputtered vanadium–titanium oxide as a counter electrode10.1016/j.solmat.2009.03.008 ↗
39. The effect of titanium on the lithium intercalation capacity of V2O5 thin films10.1016/j.tsf.2009.04.063 ↗
40. Electrochromic films composed of MnO2 nanosheets with controlled optical density and high coloration efficiency10.1149/1.2104227 ↗
41. Li4Ti5O12 and LiMn2O4 thin-film electrodes on transparent conducting oxides for all-solid-state and electrochromic applications10.1016/j.jpowsour.2015.09.063 ↗
42. Multinucleating 2,2′ 6′,2″-terpyridine ligands as building blocks for the assembly of co-ordination polymers and oligomers10.1039/DT9920003467 ↗
43. Parameterization of the optical functions of amorphous materials in the interband region10.1063/1.118064 ↗
44. EPMA‐Analyse dünner PVD‐ und CVD‐Schichten10.1002/vipr.201900714 ↗
45. Determination by X-ray microprobe of thickness and composition of thin surface layers
46. Metallopolymers and non-stoichiometric nickel oxide: towards neutral tint large-area electrochromic devices10.1016/j.solmat.2019.110002 ↗
47. Redox electrolytes for hybrid type II electrochromic devices with Fe‐MEPE or Ni1‐xO as electrode materials10.1002/celc.202000583 ↗