Multi-junction solar cells by Intermetallic Bonding and interconnect of Dissimilar Materials: GaAs/Si
Source abstract
Abstract
Abstract We present a novel, low temperature approach to multijunction solar cell fabrication combining the high efficiency multi-junction concept with the low cost of thin film technology in one solar cell structure. The intermetallic bonding approach presented is based on joining indium metal which has been deposited on the metal contact grid of the respective solar cells. This approach avoids the problems of lattice mismatch and tunnel junction limitations, connecting solar cells of potentially any material with patterned contacts. No measurable increase in resistance has been measured between bonded materials. This method allows the independent development of each cell technology for use in multijunction solar cells. This technique can be applied to any commercial off-the-shelf solar cells, if available. A GaAs/Si multijunction solar cell bonded using this approach is demonstrated. The silicon cell is off-the-shelf with textured surface and commercial metal contacts. This is integrated with an in-house grown thin film GaAs cell. The GaAs/Si device is demonstrated in both two and three terminal configurations.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: solar cell performance optimization · Nanowire Synthesis and Applications · Silicon and Solar Cell Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. A twojunction cascade solar-cell structure10.1063/1.90576 ↗
2. R. R King, A. Boca, H. WP, X.-Q. Liu, D. Bhusari, D. Larrabee, K. M Edmondson, D. C Law, C. Fetzer, S. Mesropian, N. Karam, Band-gap-engineered architectures for high-efficiency multijunction concentrator solar cells, in: Proceedings of the 24th European Photovoltaic Solar Energy Conference, 2009.
3. Solar cell efficiency tables (version 53)10.1002/pip.3102 ↗
4. Effect of gaas interfacial layer on the performance of high bandgap tunnel junctions for multijunction solar cells10.1063/1.4819917 ↗
5. High performance as-grown and annealed high band gap tunnel junctions: te behavior at the interface10.1063/1.4951690 ↗
6. Wafer direct bonding: From advanced substrate engineering to future applications in micro/nanoelectronics10.1109/JPROC.2006.886026 ↗
7. Three-terminal iii–v/si tandem solar cells enabled by a transparent conductive adhesive10.1039/C9SE00893D ↗
8. Fabrication of two-terminal metal-interconnected multijunction iii–v solar cells
9. Fabrication of gainp/gaas//si solar cells by surface activated direct wafer bonding10.1109/JPHOTOV.2013.2273097 ↗
10. Wafer-bonded p-n heterojunction of gaas and chemomechanically polished n-polar gan10.1109/LED.2012.2225137 ↗
11. Wafer fusion: materials issues and device results10.1109/2944.640648 ↗
12. Iii-v-on-silicon solar cells reaching 33% photoconversion efficiency in two-terminal configuration10.1038/s41560-018-0125-0 ↗
13. Band discontinuity measurements of the wafer bonded ingaas/si heterojunction10.1063/1.2745254 ↗
14. Evaluation of inp-to-silicon heterobonding10.1016/S0921-5107(00)00626-7 ↗
15. Wafer bonded four-junction gainp/gaas//gainasp/gainas concentrator solar cells with 44.7% efficiency10.1002/pip.2475 ↗
16. Suga · 2018
17. Electrical and optical interconnection for mechanically stacked multi-junction solar cells mediated by metal nanoparticle arrays10.1063/1.4766339 ↗
18. Iii-v//si multijunction solar cells with 30% efficiency using smart stack technology with pd nanoparticle array10.1002/pip.3200 ↗
19. Effect of ag powder and glass frit in ag paste on front contract of silicon solar cells10.1016/j.proeng.2013.10.007 ↗
20. New kind of cu based paste for si solar cells front contact formation
21. Influence of lead-free glass frit in the front contact paste on the conversion efficiency of polycrystalline silicon solar cells10.1039/C7RA07574J ↗
22. Influence of glass frits on the formation of back surface field in silicon solar cell10.1016/j.matlet.2016.01.111 ↗
23. Bedair · 2017
24. Investigation of low temperature bonding process using indium bumps10.1088/1748-0221/13/11/C11007 ↗
25. Low-temperature annealed ohmic contacts to si-doped gaas and contact formation mechanisms10.1016/j.matchemphys.2008.08.080 ↗
26. Activation energies for creep of cadmium, indium, and tin10.1016/0001-6160(55)90137-1 ↗
27. Mechanical properties of the elements
28. Some mechanical and adhesive properties of indium10.1088/0508-3443/3/9/308 ↗
29. Relation between friction and adhesion
30. Fabrication of high-efficiency iii–v on silicon multijunction solar cells by direct metal interconnect10.1109/JPHOTOV.2014.2313225 ↗
31. Progress towards a 30 solar cell10.1016/j.egypro.2015.07.066 ↗
32. Comparative analysis of interdiffusion in some thin film metal couples at room temperature10.1016/0040-6090(92)90601-7 ↗
33. Self-diffusion in indium10.1016/0001-6160(59)90201-9 ↗
34. Stretchable and soft electronics using liquid metals10.1002/adma.201606425 ↗
35. Fabrication of indium bumps for hybrid infrared focal plane array applications10.1016/j.infrared.2003.08.002 ↗
36. Development of an indium bump bond process for silicon pixel detectors at psi10.1016/j.nima.2006.05.011 ↗
37. Fully textured monolithic perovskite/silicon tandem solar cells with 25.2% power conversion efficiency10.1038/s41563-018-0115-4 ↗
38. Highly efficient gaas solar cells by limiting light emission angle10.1038/lsa.2013.1 ↗
39. Strong internal and external luminescence as solar cells approach the shockley–queisser limit10.1109/JPHOTOV.2012.2198434 ↗
40. Duda · 2012