High-temperature “ion baseball” for enhancing concentrated solar power efficiency
Source abstract
Abstract
Abstract Recent guidelines for the third generation of solar absorber coatings have shown an unavoidable necessity for low thermal emittance coatings for concentrated solar power tower technology to decrease the thermal loss at the absorber surface. By tuning the pigment spinel crystal structure, density or roughness of a coating, improved optical properties for the coating can be achieved. In this study, a high solar-radiation absorbing pigment CuMn1.5Fe0.5O4 was calcined with 3 wt % Al, Fe, Ni, Mo and Cr to study the optical property improvement of the absorber coating, which could increase the efficiency of concentrated solar power plants. The modified pigment particles were investigated and compared to the non-modified pigment by XRD, TEM and elemental mapping, which showed that the pigment was successfully doped with Fe, Ni, and Cr. In contrast, no spinel doping was observed when Al and Mo were used. The most likely final position of the migrating Cr atoms was determined by comparing the experimental IR spectrum of the Cr-doped spinel structure with the spectra of various structures calculated based on first principles density functional theory calculations. Furthermore, the prepared coatings were thermally aged for 1300 h at 800 °C in air, followed by repetitive optical measurements. Outstanding results were achieved for the aged coating, which was made from a Cr-doped black pigment. Its solar absorptance (>95%) and eT/αS ratio (0.94) after 1300 h of thermal ageing were better than that of a standard paint (eT/αS = 1). We estimated that it may be possible to save up to 300,000 €/year on a fully operating concentrated solar power (CSP) plant by replacing the standard absorber paint with the Cr-doped pigment due to its better absorption efficiency.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solar Thermal and Photovoltaic Systems · Thermal Radiation and Cooling Technologies · Transition Metal Oxide Nanomaterials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. A review on global solar energy policy10.1016/j.rser.2011.01.007 ↗
2. Concentrating solar thermoelectric generators with a peak efficiency of 7.4%10.1038/nenergy.2016.153 ↗
3. Application of phase change materials for thermal energy storage in concentrated solar thermal power plants: a review to recent developments10.1016/j.apenergy.2015.09.016 ↗
4. Compositional engineering of perovskite materials for high-performance solar cells10.1038/nature14133 ↗
5. Concentrating solar power10.1021/acs.chemrev.5b00397 ↗
6. Solar selective coatings for concentrating solar power central receivers
7. Review on concentrating solar power plants and new developments in high temperature thermal energy storage technologies10.1016/j.rser.2015.09.026 ↗
8. Papaelias · 2018 · 51
9. A new method for the design of the heliostat field layout for solar tower power plant10.1016/j.renene.2010.01.026 ↗
10. A review of studies on central receiver solar thermal power plants10.1016/j.rser.2013.02.017 ↗
11. Influence of receiver surface spectral selectivity on the solar-to-electric efficiency of a solar tower power plant10.1016/j.solener.2016.02.008 ↗
12. Maximizing concentrated solar power (CSP) plant overall efficiencies by using spectral selective absorbers at optimal operation temperatures10.1016/j.solener.2015.07.023 ↗
13. Optical, thermal and structural characteristics of carbon nanoparticles embedded in ZnO and NiO as selective solar absorbers10.1016/j.solmat.2008.04.023 ↗
14. Optical and electrical properties of Pt-Al2O3 cermet thin films near the percolation threshold, Thin Solid Film10.1016/0040-6090(85)90410-9 ↗
15. Thermal morphological evolution of platinum nano-particles in Pt-Al 2O3 nano-composites
16. Pt-Al2O3 nanocoatings for high temperature concentrated solar thermal power applications10.1016/j.physb.2011.09.104 ↗
17. Structural and optical properties of AlxOy/Pt/Al xOy multilayer absorber10.1016/j.mseb.2012.05.028 ↗
18. Effects of substrate temperatures on the thermal stability of AlxOy/Pt/AlxOy multilayered selective solar absorber coatings10.1016/j.renene.2014.10.050 ↗
19. Optimization and preparation of Pt-Al2O3 double cermet as selective solar absorber coatings10.1016/j.jallcom.2015.12.201 ↗
20. Sol-gel derived CuCoMnOx spinel coatings for solar absorbers: structural and optical properties10.1016/S0927-0248(01)00024-1 ↗
21. Solar absorber coatings based on CoCuMnOx spinels prepared via the sol-gel process: structural and optical properties10.1016/S0927-0248(02)00457-9 ↗
22. Development of W–SiO2 and Nb–TiO2 solar absorber coatings for combined heat and power systems at intermediate operation temperatures10.1016/j.solmat.2014.10.022 ↗
23. ERDA of Ni–Al2O3/SiO2 solar thermal selective absorbers10.1016/j.solmat.2008.02.014 ↗
24. Novel sol–gel based selective coatings: from coil absorber coating to high power coating10.1016/j.solmat.2015.04.010 ↗
25. Selective thin film coatings for the conversion of solar radiation10.1016/0376-4583(83)90111-5 ↗
26. Askeland · 2010
27. Effect of Co and Pr doping on the properties of solar-reflective ZnFe2O4dark pigment
28. Spectral properties of the UV absorbing and near-IR reflecting blue pigment, YIn1-xMnxO310.1016/j.dyepig.2016.05.029 ↗
29. From serendipity to rational design: tuning the blue trigonal bipyramidal Mn3+Chromophore to violet and purple through application of chemical pressure10.1021/acs.inorgchem.6b01639 ↗
30. A theoretical feasibility study of pigments for thickness-sensitive spectrally selective paints10.1088/0022-3727/37/7/026 ↗
31. Kinetic aspects of the thermal degradation of poly(dimethyl siloxane) and poly(dimethyl diphenyl siloxane)10.1016/S0141-3910(01)00261-0 ↗
32. The effect of phenyl content on the degradation of poly(dimethyl diphenyl) siloxane copolymers10.1016/S0141-3910(01)00186-0 ↗
33. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
34. Ab initiomolecular dynamics for liquid metals10.1103/PhysRevB.47.558 ↗
35. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
36. Comment on ''Generalized gradient approximation made simple10.1103/PhysRevLett.80.890 ↗
37. A consistent and accurate ab initio parametrization of density functional dispersion correction (DFT-D) for the 94 elements H-Pu10.1063/1.3382344 ↗
38. From ultrasoft pseudopotentials to the projector augmented-wave method10.1103/PhysRevB.59.1758 ↗
39. A new method for diagonalising large matrices10.1088/0305-4470/18/9/018 ↗
40. Goldstein · 2002
41. A grid-based Bader analysis algorithm without lattice bias10.1088/0953-8984/21/8/084204 ↗
42. Diagrammatic separation of different crystal structures of A 2BX4 compounds without energy minimization: a pseudopotential orbital radii approach10.1002/adfm.200901811 ↗
43. Structure of spinel10.1111/j.1151-2916.1999.tb02241.x ↗
44. De Graef · 2007
45. The crystal field stabilization energy (CFSE)10.1021/ed058p1035.1 ↗
46. The distribution of transition metal cations in spinels10.1016/0022-3697(57)90034-3 ↗
47. Burns · 1993
48. Lide · 2005
49. Magnetic and electrical properties of MnxCu1-xFe2O4 ferrite10.1590/1980-5373-MR-2015-0511 ↗
50. Evolution of structural properties of iron oxide nano particles during temperature treatment from 250°C-900°C: X-ray diffraction and Fe K-shell pre-edge X-ray absorption study10.1016/j.cap.2011.11.013 ↗
51. Point defects and their reactions in electron-irradiated GaAs investigated by optical absorption spectroscopy10.1103/PhysRevB.54.8527 ↗
52. Lattice parameters and stability of the spinel compounds in relation to the ionic radii and electronegativities of constituting chemical elements10.1021/ic500200a ↗
53. Doping rules and doping prototypes in A2BO4 spinel oxides10.1002/adfm.201101469 ↗
54. Preparation of spinel lithium manganese oxide by aqueous co-precipitation10.1016/S0378-7753(99)00347-X ↗
55. Solubility limit, magnetic interaction and conduction mechanism in rare earth doped spinel ferrite10.17571/appslett.2016.02001 ↗
56. Ben · 1974 · 960
57. The scherrer equation versus the ‘ Debye – scherrer equation10.1038/nnano.2011.145 ↗
58. Influence of Al3+ion concentration on the crystal structure and magnetic anisotropy of nanocrystalline spinel cobalt ferrite10.1016/j.jmmm.2011.03.010 ↗
59. Chemical characterization of transition metal spinel-type oxides by infrared spectroscopy10.1366/0003702953964372 ↗
60. Vibrational spectra of spinels with cation ordering on the octahedral sites10.1016/0022-4596(75)90208-X ↗
61. Infrared studies of spinels—III: the normal II–III spinels10.1016/0584-8539(71)80235-0 ↗
62. Optical properties and thermal stability of TiAlN/AlON tandem absorber prepared by reactive DC/RF magnetron sputtering10.1016/j.solmat.2008.06.004 ↗
63. Microstructure and thermal stability of Al/Ti0.5Al0.5N/Ti0.25Al0.75N/AlN solar selective coating10.1016/j.solmat.2012.12.010 ↗
64. Copper-oxide spinel absorber coatings for high-temperature concentrated solar power systems10.1016/j.solmat.2018.03.025 ↗
65. Maximizing concentrated solar power (CSP) plant overall efficiencies by using spectral selective absorbers at optimal operation temperatures10.1016/j.solener.2015.07.023 ↗
66. Lienhard · 2003
67. Mehos · 2017
68. Concentrating solar power10.1021/acs.chemrev.5b00397 ↗