Effect of an additional Cu-deficient layer deposition on alkali treated Cu(In,Ga)Se2 solar cells deposited at low temperature
Source abstract
Abstract
Abstract In this work, we found that the deposition of a Cu-deficient layer after alkali post-deposition treatment (PDT) of Cu(In,Ga)Se2 (CIGS) at low temperature (450 °C) effectively improves the performance of CIGS solar cells. Compared to the CGIS with only the alkali PDT, the deposition of the Cu-deficient layer leads to the formation of larger holes on the surface and results in higher efficiency. The conversion efficiency improved from 11% to 16% after alkali PDT and Cu-deficient layer deposition because of a passivation effect. The formation of a passivation layer after both alkali treatment and Cu-deficient layer deposition was observed by TEM-EDX, showing that the deposition of the Cu-deficient layer could contribute to a low Cu surface composition. Finally, the effect on the CIGS and CdS interface was analyzed using electron-beam-induced current measurement (EBIC).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. New world record efficiency for Cu (In, Ga) Se2 thin-film solar cells beyond 20%10.1002/pip.1078 ↗
2. I.L. Repins, M.A. Contreras, M. Romero, Y. Yan, W.K. Metzger, J. Li, S. Johnston, B. Egaas, C. Dehart, J. Scharf, Characterization of 19.9% Efficient CIGS Absorbers, in: Proceedings of the IEEE Phot. Spec. Conference: p. 1127.
3. Review of progress toward 20% efficiency flexible CIGS solar cells and manufacturing issues of solar modules10.1109/JPHOTOV.2012.2226869 ↗
4. Properties of Cu(In,Ga)Se2 solar cells with new record efficiencies up to 21.7%10.1002/pssr.201409520 ↗
5. Potassium-induced surface modification of Cu(In,Ga)Se2 thin films for high-efficiency solar cells10.1038/nmat3789 ↗
6. Highly efficient Cu(In,Ga)Se2 solar cells grown on flexible polymer films10.1038/nmat3122 ↗
7. Gallium gradients in chalcopyrite thin films: depth profile analyses of films grown at different temperatures10.1063/1.3656986 ↗
8. Alternative sodium sources for Cu(In,Ga)Se2 thin-film solar cells on flexible substrates10.1016/j.tsf.2011.01.399 ↗
9. Effects of sodium on polycrystalline Cu(In,Ga)Se2 and its solar cell performance**10.1002/(SICI)1521-4095(199801)10:1<31::AID-ADMA31>3.0.CO;2-3 ↗
10. Effects of NaF coevaporation on structural properties of Cu(In,Ga)Se2 thin films10.1016/S0040-6090(03)00246-3 ↗
11. Peeled-off flexible Cu (In, Ga) Se2 solar cells and Na diffusion effects on cell performances10.1007/s13391-016-4012-1 ↗
12. Growth of Cu (In, Ga) Se2 thin films by coevaporation using alkaline precursors
13. Unveiling the effects of post-deposition treatment with different alkaline elements on the electronic properties of CIGS thin film solar cells10.1039/c4cp00614c ↗
14. Effect of potassium fluoride post-deposition treatment on Cu(In,Ga)Se2 thin films and solar cells fabricated onto sodalime glass substrates10.1016/j.solmat.2016.06.023 ↗
15. Compositional investigation of potassium doped Cu(In,Ga)Se2 solar cells with efficiencies up to 20.8%10.1002/pssr.201409040 ↗
16. Efficiency enhancement of Cu(In,Ga)Se2 thin-film solar cells by a post-deposition treatment with potassium fluoride10.1002/pssr.201307238 ↗
17. Effects of heavy alkali elements in Cu(In,Ga)Se2 solar cells with efficiencies up to 22.6%10.1002/pssr.201600199 ↗
18. Control of valence band offset at CdS / Cu (In, Ga) Se2 interface by inserting wide-bandgap materials for suppression of interfacial recombination in Cu (In, Ga) Se2 solar cells CdS Side Mo Side Se Flux CdS Side10.7567/JJAP.54.08KC08 ↗
19. Compositionally induced valence-band offset at the grain boundary of polycrystalline chalcopyrites creates a hole barrier10.1063/1.2132537 ↗
20. Defect physics of the CuInSe2 chalcopyrite semiconductor10.1103/PhysRevB.57.9642 ↗
21. A comprehensive characterization of the interfaces in Mo/CIS/CdS/ZnO solar cell structures10.1016/0927-0248(95)00107-7 ↗
22. Crystallographic and optical properties and band structures of CuInSe2, CuIn3Se5, and CuIn5Se8 phases in Cu-poor Cu2Se–In2Se3 pseudo-binary system10.7567/JJAP.55.04ES15 ↗
23. Control of valence band offset of Cu (In, Ga) Se2 solar cells with single-graded band profile temperatures Control of valence band offset of Cu (In, Ga) Se2 solar cells with single-graded band profile10.7567/JJAP.56.062301 ↗
24. A. Sadono, T. Ogihara, K. Nakada, A. Yamada, Efficiency Improvement of Low Temperature (450℃) Deposited Cu(In,Ga)Se2 Solar Cells by Alkali Treatment and Deposition of Cu-poor Layer, in: Proceedings of the 33rd Eur. Photovolt. Sol. Energy Conference Exhib., Amsterdam, 2017.
25. Sputtered molybdenum bilayer back contact for copper indium diselenide-based polycrystalline thin-film solar cells10.1016/0040-6090(94)06462-8 ↗
26. Band-gap engineering in Cu(In,Ga) Se2 thin films grown from (In,Ga)2Se3 precursors10.1016/0927-0248(95)00122-0 ↗
27. Alkali incorporation control in Cu (In,Ga) Se2 thin films using silicate thin layers and applications in enhancing flexible solar cell efficiency10.1063/1.2992061 ↗
28. Sodium incorporation strategies for CIGS growth at different temperatures10.1016/j.tsf.2004.11.071 ↗
29. Potassium postdeposition treatment-induced band gap widening at Cu(In,Ga)Se2 surfaces - reason for performance leap?10.1021/acsami.5b09231 ↗
30. Reed · 1971
31. Efficiency enhancement of flexible Cu(In,Ga)Se2 solar cells deposited on polyimide-coated soda lime glass substrate by alkali treatment10.7567/JJAP.56.08MC15 ↗
32. Alkali-templated surface nanopatterning of chalcogenide thin films: a novel approach toward solar cells with enhanced efficiency10.1021/acs.nanolett.5b00584 ↗
33. Coevaporated KInSe2: a fast alternative to KF postdeposition treatment in high-efficiency Cu (In, Ga) Se2 thin film solar cells10.1109/JPHOTOV.2016.2589365 ↗