journal article·2017-12

Alternative luminescence image evaluation – Comparison with lock-in thermography

O. Breitenstein, F. Frühauf

Publisher page

Abstract

Abstract It was shown recently that previous approaches for quantitative luminescence image evaluation based on the model of independent diodes inevitably lead to erroneous results for imaging saturation current densities. However, the pioneering work of Fuyuki on electroluminescence imaging of solar cells was not based on this model. There it was claimed that the calibration constant of the local luminescence signal should be proportional to the local effective diffusion length. With increasing diffusion length, however, the luminescence reaches a saturation value. Recently a simple formula for the calibration constant was proposed, which describes both the proportionality for small diffusion lengths and the saturation property for large ones. While this non-linear Fuyuki PL evaluation method was previously only applied to standard BSF cells, in this work it is applied to modern multicrystalline PERC cells processed from different high performance multicrystalline silicon materials. The results are compared to that of dark lock-in thermography (DLIT) and Laplacian PL investigations of these cells. It is found that saturation current density images obtained from the alternative luminescence evaluation methods are close to that based on DLIT in low lifetime regions, but show a much better spatial resolution. In high lifetime regions, however, this alternative PL evaluation is generally less reliable than DLIT. These alternative kinds of luminescence image evaluation may replace previous approaches of quantitative PL evaluation based on the model of independent diodes.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Chalcogenide Semiconductor Thin Films · Thermography and Photoacoustic Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Spatially resolved series resistance of silicon solar cells obtained from luminescence imaging10.1063/1.2709630 ↗
2. Evaluating luminescence based voltage images of silicon solar cells10.1063/1.3443438 ↗
3. Superposition and reciprocity in the electroluminescence and photoluminescence of solar cells10.1109/JPHOTOV.2011.2179018 ↗
4. Fast series resistance imaging for silicon solar cells using electroluminescence10.1002/pssr.200903175 ↗
5. Spatially resolved determination of dark saturation current and series resistance of silicon solar cells10.1002/pssr.200903290 ↗
6. Spatially resolved photoluminescence imaging of essential silicon solar cell parameters and comparison with CELLO measurements10.1016/j.solmat.2012.10.010 ↗
7. The reliability of thermography- and luminescence-based series resistance and saturation current density imaging10.1016/j.solmat.2015.01.017 ↗
8. Photographic surveying of minority carrier diffusion length in polycrystalline silicon solar cells by electroluminescence10.1063/1.1978979 ↗
9. Analytic findings in the electroluminescence characterization of crystalline silicon solar cells10.1063/1.2431075 ↗
10. Quantitative Luminescence Characterization of Crystalline Silicon Solar Cells
11. Diffusion lengths of silicon solar cells from luminescence images10.1063/1.2749201 ↗
12. Laplacian photoluminescence image evaluation employing image deconvolution10.1016/j.solmat.2015.11.035 ↗
13. Effective diffusion length and bulk saturation current density imaging in solar cells by spectrally filtered luminescence imaging10.1109/JPHOTOV.2016.2571621 ↗
14. P. Basore, Extended spectral analysis of internal quantum efficiency, in: Proceedings of the 23rd IEEE Photovoltaic Specialists Conference, Louisville, pp. 147–152, 1993.
15. Towards an improved Laplacian-based photoluminescence image evaluation method10.1016/j.solmat.2015.06.020 ↗
16. Kingslake · 1983
17. The impact of silicon CCD photon spread on quantitative analyses of luminescence images10.1109/JPHOTOV.2013.2287912 ↗
18. An improved method to measure the point spread function of cameras used for electro- and photoluminescence imaging of silicon solar cells10.1109/JPHOTOV.2016.2514744 ↗
19. D.E. Kane, R.M. Swanson, Measurement of the emitter saturation current by a contactless photoconduc-tivity decay method, in: Proceedings of the 18th IEEE Photovoltaic Specialists Conference (PVSC), Las Vegas, pp. 578–583, 1985.
20. Nondestructive local analysis of current-voltage characteristics of solar cells by lock-in thermography10.1016/j.solmat.2011.05.049 ↗
21. Local efficiency analysis of solar cells based on lock-in thermography10.1016/j.solmat.2012.07.019 ↗
22. see 〈www.maxplanckinnovation.de/en〉 (2017).
23. Reduced fill factors in multicrystalline silicon solar cells due to injection-level dependent bulk recombination lifetimes10.1002/1099-159X(200007/08)8:4<363::AID-PIP328>3.0.CO;2-Y ↗
24. Evaluation of luminescence images of solar cells for injection-level dependent lifetimes10.1016/j.solmat.2012.12.024 ↗
25. Boron-oxygen defect formation rates and activity at elevated temperatures10.1016/j.egypro.2016.07.070 ↗
26. see 〈www.infratec-infrared.com〉 (2017).
27. see 〈http://ir.trinasolar.com/phoenix.zhtml?C=206405&p=irol-newsArticle&ID=2230468〉 (2017).
28. Improved empirical method for calculating short circuit current density images of silicon solar cells from saturation current density images and vice versa10.1016/j.solmat.2016.04.047 ↗
29. Finite element simulation of inhomogeneous solar cells based on lock-in thermography and luminescence imaging10.1016/j.solmat.2016.12.037 ↗