Influence of aging climate and cathode adhesion on organic solar cell stability
Source abstract
Abstract
Recently, organic solar cells have demonstrated high power conversion efficiencies, but extrinsic device stability remains to be a challenge. Often, delamination of the cathode upon water ingress leads to a massive active area loss and to a strong decrease in efficiency. We present highly efficient organic solar cells with an oligothiophene-based donor and two different cathodes. Devices are aged at four different climates under continuous illumination. Al and MoO3/Cr/Al cathodes are compared. Additional interlayers are introduced for enhanced cathode adhesion. Aging in different climates reveals a strong dependency of the degradation speed on absolute humidity for standard Al cathodes. However, using additional interlayers, degradation seems to be almost decoupled from the applied climate and device degradation is slowed immensely. Parallel WVTR measurements of the AlOx barrier allow for the assessment of absolute water quantities until devices are degraded to half of their initial efficiency: 24gm2 are found for standard Al cathodes, while devices with additional interlayers reach 58gm2. This difference is related to a completely different aging behavior, which trades strong short-circuit current density losses for moderate fill-factor losses.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Molecular Junctions and Nanostructures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Heliatek, Heliatek Sets New Organic Photovoltaic World Record Efficiency of 13.2%, 2016 URL: 〈http://www.heliatek.com/en/press/press-releases/details/heliatek-sets-new-organic-photovoltaic-world-record-efficiency-of-13-2?file=files/content/Presse/2016_Pressemitteilungen/160208_PMHeliatekEfficiency/20160208_PR_Heliatek_Efficiency_EN.pdf〉.
2. Water ingress into and climate dependent lifetime of organic photovoltaic cells investigated by calcium corrosion tests10.1016/j.solmat.2013.10.023 ↗
3. Investigation of the degradation mechanisms of a variety of organic photovoltaic devices by combination of imaging techniques the ISOS-3 inter-laboratory collaboration10.1039/c2ee03508a ↗
4. Influence of cathode oxidation via the hole extraction layer in polymer: fullerene solar cells10.1016/j.orgel.2011.01.025 ↗
5. Highly robust transparent and conductive gas diffusion barriers based on tin oxide10.1002/adma.201502973 ↗
6. Ca test of Al2O3 gas diffusion barriers grown by atomic layer deposition on polymers10.1063/1.2221912 ↗
7. Defect-sealing of Al2O3/ZrO2 multilayer for barrier coating by plasma-enhanced atomic layer deposition process10.1016/j.tsf.2015.01.040 ↗
8. Investigating electrodes degradation in organic photovoltaics through reverse engineering under accelerated humidity lifetime conditions10.1016/j.solmat.2014.07.051 ↗
9. Stabilization mechanisms of aluminum-titanium bilayer cathodes in organic solar cells
10. The effect of barrier performance on the lifetime of small-molecule organic solar cells10.1016/j.solmat.2011.09.026 ↗
11. Degradation mechanisms in organic solar cells: localized moisture encroachment and cathode reaction10.1016/j.solmat.2012.04.038 ↗
12. Longterm stability of efficient inverted P3HT:PCBM solar cells10.1016/j.solmat.2008.12.022 ↗
13. H. Cao, M. Tanaka, K. Ishikawa, Stabilization mechanisms of aluminum-titanium bilayer cathodes in organic solar cells, Appl. Phys. Lett., 103(14), ISSN 00036951, doi: http://dx.doi.org/10.1063/1.4824209.10.1063/1.4824209 ↗
14. Degradation mechanism of organic solar cells with aluminum cathode10.1016/j.solmat.2011.07.020 ↗
15. Oxide sandwiched metal thin-film electrodes for long-term stable organic solar cells10.1002/adfm.201201592 ↗
16. Process simplifications in large area hybrid silicon heterojunction solar cells10.1016/j.solmat.2015.05.049 ↗
17. Metal films on polymer substrates stretched beyond 50%
18. Highly efficient organic multi-junction solar cells with a thiophene based donor material10.1063/1.4893012 ↗
19. Degradation of flexible, ITO-free oligothiophene organic solar cells10.1021/acsami.6b02363 ↗
20. Optical display film as flexible and light trapping substrate for organic photovoltaics10.1364/OE.24.00A974 ↗
21. Consensus stability testing protocols for organic photovoltaic materials and devices10.1016/j.solmat.2011.01.036 ↗
22. Breakdown and protection of ALD moisture barrier thin films10.1021/acsami.5b06891 ↗
23. O.A. Alduchov, R.E. Eskridge, Improved Magnus Form Approximation of Saturation Vapor Pressure, 1996, (http://dx.doi.org/10.1175/1520-0450(1996)035〈0601:IMFAOS〉2.0.CO;2).
24. Electrical calcium test for moisture barrier evaluation for organic devices
25. Permeation rate measurements by electrical analysis of calcium corrosion10.1063/1.1626015 ↗
26. Experimental comparison of high-performance water vapor permeation measurement methods10.1016/j.orgel.2014.10.014 ↗
27. Note: influence of calcium corrosion on the performance of an adjacent permeation barrier10.1063/1.4861536 ↗
28. F. Nehm, F. Dollinger, H. Klumbies, K. Leo, L. Müller-Meskamp, Device-like electrical calcium corrosion test for WVTR measurements of ultra-barriers, in: Proceedings of the Annual Technical Conference, Society of Vacuum Coaters, Santa Clara, California, USA, 2015.10.14332/svc15.proc.1936 ↗
29. Inhibiting bottleneck corrosion in electrical calcium corrosion tests for ultra-barrier measurements
30. H. Klumbies, L. Müller-Meskamp, S. Schubert, T. Mönch, M. Hermenau, K. Leo, Diffusion barriers for organic devices and their evaluation with calcium corrosion tests, 56th Annual Technical Conference Proceedings of the Society of Vacuum Coaters.10.14332/svc13.proc.1116 ↗
31. Reflectance and structure of evaporated chromium and molybdenum films10.1116/1.569548 ↗
32. Improving cathodes with a polymer interlayer in reversed organic solar cells
33. Degradation mechanisms in organic photovoltaic devices10.1016/j.orgel.2011.11.027 ↗
34. High-performance organic thin-film transistors with metal oxide/metal bilayer electrode
35. A. Thran, T. Strunskus, V. Zaporojtchenko, F. Faupel, Evidence of Noble Metal Diffusion in Polymers at Room Temperature and its Retardation by a Chromium Barrier, 81(2), 2002, 244–246, doi: http://dx.doi.org/10.1063/1.1491609.10.1063/1.1491609 ↗