Lifetime improvement after phosphorous diffusion gettering on upgraded metallurgical grade silicon
Source abstract
Abstract
Wide experimental evidence of the phosphorus diffusion gettering beneficial effect on solar grade silicon is found by measuring electron effective lifetime and interstitial iron concentration in as-grown and post processed samples from two ingots of upgraded metallurgical grade silicon produced by Ferrosolar. Results after two different P-diffusion processes are compared: P emitter diffusion at 850ºC followed by fast cool-down (called “standard process”) or followed by slow cool-down (called “extended process”). It is shown that final lifetimes of this low cost material are in the range of those obtained with conventional material. The extended process can be beneficial for wafers with specific initial distribution and concentration of iron, e.g. materials with high concentration of big Fe precipitates, while for other cases the standard process is enough efficient. An analysis based on the comparison of measured lifetime and dissolved iron concentration with theoretical calculations helps to infer the initial iron distribution and concentration, and according to that, choose the more effective type of gettering.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · Silicon Carbide Semiconductor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. J.M. Míguez, J. Bullón, R. Ordás, T. Carballo, J. Diéguez, A. Miranda, O. Martínez, A. Souto, J. Jiménez, V. Parra, A. Pérez, B. Moralejo, UMG-Si based PV materials and devices: current state and future trends, in: Proceedings of the 6th International Workshop on Crystalline Silicon Solar Cells, 6.O.1, Aix-les-Bains, France, 2012.
2. From electronic grade to solar grade silicon: chances and challenges in photovoltaics10.1002/pssa.200521104 ↗
3. Acceptable contamination levels in solar grade silicon: from feedstock to solar cell10.1016/j.mseb.2008.05.021 ↗
4. Transition-metal profiles in a multicrystalline silicon ingot10.1063/1.1845584 ↗
5. Origin of the low carrier lifetime edge zone in multicrystalline PV silicon10.1002/pip.876 ↗
6. Gettering in silicon10.1063/1.342714 ↗
7. Impurity-to-efficiency simulator: predictive simulation of silicon solar cell performance based on iron content and distribution10.1002/pip.1062 ↗
8. Evaluation of possible mechanisms behind P gettering of iron10.1063/1.3607239 ↗
9. Engineering metal-impurity nanodefects for low-cost solar cells10.1038/nmat1457 ↗
10. Improvement of multicrystalline silicon solar cells by a low temperature anneal after emitter diffusion10.1002/pip.1002 ↗
11. Enhanced iron gettering by short, optimized low-temperature annealing after phosphorus emitter diffusion for industrial silicon solar cell processing10.1002/pssc.201000334 ↗
12. Gettering improvements of minority-carrier lifetimes in solar grade silicon10.1016/j.solmat.2012.02.027 ↗
13. Iron detection in crystalline silicon by carrier lifetime measurements for arbitrary injection and doping10.1063/1.1637136 ↗
14. Graff · 1995
15. Statistics of the recombinations of holes and electrons10.1103/PhysRev.87.835 ↗
16. Electron–hole recombination in germanium10.1103/PhysRev.87.387 ↗
17. A comprehensive model for the gettering of lifetime‐killing impurities in silicon10.1149/1.1393590 ↗
18. Schottky effect model of electrical activity of metallic precipitates in silicon10.1063/1.126778 ↗
19. Precipitated iron: a limit on gettering efficacy in multicrystalline silicon10.1063/1.4788800 ↗