Effects of absorber near-interface compensation on Cd(Se,Te) solar cell performance
Source abstract
Abstract
Arsenic (As) has been shown to be an effective p-type dopant for CdTe, although high performance in As-doped devices remains difficult to achieve. Arsenic is prone to self-compensation in CdTe, as evidenced by the accumulation of dopant atoms in CdTe/Cd(Se,Te) near the interface with Mg xZn 1-x O (MZO). In this study, we use SCAPS 1D modeling software to investigate the effect of near-interface compensation, helping elucidate loss pathways in present-day As-doped devices and informing future growth directions. We consider three possible results of As accumulation: shallow donors, deep recombination centers, and a thin layer of excess acceptor accumulation. The reduction in near-interface carrier concentration caused by shallow donors is shown to improve open-circuit voltages (V oc), whereas deep levels are detrimental to all performance parameters. The thin charge layer affects capacitance-voltage (CV) measurements by reducing the depletion width while maintaining the same carrier concentration, replicating CV behavior that has been observed in actual devices. These results illustrate the importance of monitoring dopant accumulation within 100 nm of the interface, and suggest that reducing or eliminating the As concentration in this region would be beneficial. An undoped Cd(Se,Te) layer at the interface is suggested as a possible device structure to boost performance.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Analysis and optimisation of the glass/TCO/MZO stack for thin film CdTe solar cells10.1016/j.solmat.2018.07.019 ↗
2. Interface engineering for 25% CdTe solar cells
3. Polycrystalline CdTe photovoltaics with efficiency over 18% through improved absorber passivation and current collection10.1016/j.solmat.2017.11.031 ↗
4. Polycrystalline CdSeTe/CdTe absorber cells with 28 mA/cm2 short-circuit current10.1109/JPHOTOV.2017.2775139 ↗
5. Roles of bandgrading, lifetime, band alignment, and carrier concentration in high-efficiency CdSeTe solar cells10.1063/5.0013726 ↗
6. Exceeding 20% efficiency with in situ group V doping in polycrystalline CdTe solar cells10.1038/s41560-019-0446-7 ↗
7. Understanding what limits the voltage of polycrystalline CdSeTe solar cells10.1038/s41560-022-00985-z ↗
8. Understanding arsenic incorporation in CdTe with atom probe tomography10.1016/j.solmat.2018.02.023 ↗
9. Doping properties of cadmium-rich arsenic-doped CdTe single crystals: evidence of metastable AX behavior
10. Study of thin film poly-crystalline CdTe solar cells presenting high acceptor concentrations achieved by in-situ arsenic doping10.1016/j.solmat.2019.02.025 ↗
11. Investigating the role of copper in arsenic doped CdSeTe photovoltaics10.1016/j.solmat.2022.111886 ↗
12. Tabulated values of the Shockley–Queisser limit for single junction solar cells10.1016/j.solener.2016.02.015 ↗
13. The roles of carrier concentration and interface, bulk, and grain-boundary recombination for 25% efficient CdTe solar cells10.1063/1.4984320 ↗
14. Experimental and theoretical comparison of Sb, As, and P diffusion mechanisms and doping in CdTe10.1088/1361-6463/aaa67e ↗
15. High p-type doping, mobility, and photocarrier lifetime in arsenic-doped CdTe single crystals10.1063/1.5029450 ↗
16. Arsenic doping of polycrystalline CdSeTe devices for microsecond life-times with high carrier concentrations
17. Comparative study of as and Cu doping stability in CdSeTe absorbers10.1016/j.solmat.2021.111012 ↗
18. Overcoming carrier concentration limits in polycrystalline CdTe thin films with in situ doping10.1038/s41598-018-32746-y ↗
19. First principles guided device fabrication of arsenic doped CdTe photovoltaics
20. Low-temperature and effective ex situ group V doping for efficient polycrystalline CdSeTe solar cells10.1038/s41560-021-00848-z ↗
21. Beyond thermodynamic defect models: a kinetic simulation of arsenic activation in CdTe
22. Carrier providers or killers: the case of Cu defects in CdTe
23. Carrier density and lifetime for different dopants in single-crystal and polycrystalline CdTe10.1063/1.4966209 ↗
24. CdTe solar cells with open-circuit voltage breaking the 1 V barrier
25. Self-compensation in arsenic doping of CdTe10.1038/s41598-017-04719-0 ↗
26. Impact of dopant-induced optoelectronic tails on open-circuit voltage in arsenic-doped Cd(Se)Te solar cells10.1063/5.0018955 ↗
27. Dual-wavelength time-resolved photoluminescence study of CdSexTe1-x surface passivation via MgyZn1-yO and Al2O310.1109/JPHOTOV.2021.3124169 ↗
28. Sze · 2007
29. Modelling polycrystalline semiconductor solar cells10.1016/S0040-6090(99)00825-1 ↗
30. Impact of carrier concentration and carrier lifetime on MgZnO/CdSeTe/CdTe solar cells10.1109/JPHOTOV.2020.3017741 ↗
31. Emitter/absorber interface of CdTe solar cells10.1063/1.4953820 ↗
32. The influence of conduction band offset on CdTe solar cells10.1007/s11664-017-5850-9 ↗
33. Numerical modeling of CIGS and CdTe solar cells: setting the baseline
34. Evidence of buried junctions in CdSeTe absorbers