Bifacial n-type silicon solar cells with selective front surface field and rear emitter
Source abstract
Abstract
Abstract To meet the challenge that Si wafer based industrial n-type solar cells are more complicated to manufacture as compared to producing p-type Si solar cells, a simplified cell fabrication process to make n-type silicon solar cells has been developed in which boron-doped rear emitter and phosphorus-doped front surface field (FSF) are formed in one high-temperature step. By adding a selective FSF structure the conversion efficiency of the n-type solar cells can be further improved. Our proposal enables the doping concentration of the emitter and the FSF to be adjustable independently without affecting the ohmic contacts on both sides. A champion batch conversion efficiency of 22% was obtained by optimizing the contact ratio of the emitter and thermal drive-in duration.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Silicon Nanostructures and Photoluminescence · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Mandelkorn · 1975
2. Physics, Technology and Use of Photovoltaics
3. Latest efficiency results with the screenprinting technology and comparison with the buried contact structure, IEEE First World Conference on Photovoltaic Energy Conversion
4. Achievement of more than 25% conversion efficiency with crystalline silicon heterojunction solar cell10.1109/JPHOTOV.2014.2352151 ↗
5. Advancements in n-type base crystalline silicon solar cells and their emergence in the photovoltaic industry
6. Review of light-induced degradation in crystalline silicon solar cells10.1016/j.solmat.2015.11.047 ↗
7. The choice of silicon wafer for the production of low-cost rear-contact solar cells
8. Back contacted a-Si:H/c-Si heterostructure solar cells10.1016/j.jnoncrysol.2007.09.023 ↗
9. Towards industrial n-type PERT silicon solar cells: rear passivation and metallization scheme10.1016/j.egypro.2011.06.169 ↗
10. High-efficiency PERL and PERT silicon solar cells on FZ and MCZ substrates10.1016/S0927-0248(00)00123-9 ↗
11. Towards understanding the characteristics of Ag–Al spiking on boron-doped silicon for solar cells10.1016/j.solmat.2015.11.032 ↗
12. Impact of boron doping profiles on the specific contact resistance of screen printed Ag-Al contacts on silicon10.1016/j.solmat.2015.04.039 ↗
13. 21.4% efficient fully screen printed n-type solar cell on epitaxially grownsilicon wafers with built-in boron rear side emitter
14. Status of high efficiency, low cost n-type silicon solar cells10.1016/j.egypro.2017.09.262 ↗
15. Microscopic origin of the aluminium assisted spiking effects in n-type silicon solar cells10.1016/j.solmat.2014.05.036 ↗
16. Towards 22% efficient screen-printed bifacial, n -type silicon solar cells10.1016/j.solmat.2018.07.020 ↗
17. Bifacial, fully screen-printed n-PERT solar cells with BF2 and B implanted emitters10.1016/j.solmat.2016.05.028 ↗
18. Mass production and modeling of high efficiency n-PERT solar cells with ion implanted BSF/selective-BSF10.1016/j.solener.2016.11.043 ↗
19. Large area monofacial screen-printed rear-emitter nPERT cells approaching 23% efficiency
20. A simple processing sequence for selective emitters
21. Minimizing the electrical losses on the front side: Development of a selective emitter process from a single diffusion
22. Influence of base resistivity on solar cell parameters of double-side contacted rear junction solar cells10.1016/j.egypro.2012.07.028 ↗
23. Effect of Al2O3 film on silver paste contact formation at silicon surface10.1016/j.solener.2017.10.012 ↗
24. Excellent boron emitter passivation for high-efficiency Si wafer solar cells using AlOx/SiNx dielectric stacks deposited in an industrial inline plasma reactor10.1002/pip.1259 ↗
25. Boron emitter passivation with Al2O3 and Al2O3/SiNx stacks using ALD Al2O310.1109/JPHOTOV.2012.2226145 ↗
26. Influence of laser damage on the performance of selective emitter solar cell fabricated using laser doping process10.1016/j.solmat.2014.08.021 ↗