journal article·2020-03Open access

Thermal stability improvement of metal oxide-based contacts for silicon heterojunction solar cells

Jinyoun Cho, Hariharsudan Sivaramakrishnan Radhakrishnan, Rajiv Sharma, Maria Recaman Payo, Maarten Debucquoy, Arvid van der Heide, Ivan Gordon, Jozef Szlufcik, Jef Poortmans

Abstract

Abstract Metal oxides are interesting materials for use as carrier-selective contacts for the fabrication of doping-free silicon solar cells. In particular, MoOx and TiOx have been successfully used as hole and electron selective contacts in silicon solar cells, respectively. However, it is of paramount importance that good thermal stability is achieved in such contacts. In our work, we combined i-a-Si:H/MoOx based hole contacts with electron contacts featuring i- a -Si:H/ T iOx/l o w work function m etal (ATOM) to fabricate doping-free cells, termed MolyATOM cells. We found that the thermal stability of the ATOM contact was improved when the i-a-Si:H was annealed (300 °C for 20 min in N2) before depositing TiOx (i.e. pre-TiOx annealing), which reduces the hydrogen content in i-a-Si:H by about 27 %rel, and thereby the H-related degradation of the ATOM contact characteristics. Moreover, it was found that reducing the thickness of the low-work function metal on top of the TiOx enhanced the thermal stability of the ATOM contact. With these adaptations, the MolyATOM cell efficiency was improved by 3.5 %abs, with the highest efficiency of 17.6%. Moreover, the cells show improved thermal stability after the above-mentioned pre-TiOx annealing, which is confirmed by annealing tests at cell level as well as damp-heat tests at module level. The insights of this study could be used to tailor other metal-oxide based electron or hole contacts.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Schmela · 2019
2. Philipps · 2019
3. Metz
4. ITRPV · 2019 · 1
5. Surface recombination velocity of highly doped n ‐type silicon10.1063/1.363250 ↗
6. Design, fabrication and characterisation of a 24.4% efficient interdigitated back contact solar cell10.1002/pip.2556 ↗
7. Analysis of contact recombination at rear local back surface field via boron laser doping and screen-printed aluminum metallization on p-type PERC solar cells10.1016/j.egypro.2017.09.256 ↗
8. Recombination at metal-emitter interfaces of front contact technologies for highly efficient silicon solar cells10.1016/j.egypro.2011.06.111 ↗
9. 22.13% Efficient industrial p-type mono PERC solar cell
10. 21%-Efficient n-type rear-junction PERT solar cell with industrial thin 156mm Cz single crystalline silicon wafer10.1016/j.egypro.2015.07.039 ↗
11. Surface passivation of crystalline silicon solar cells: present and future10.1016/j.solmat.2018.06.047 ↗
12. High-efficiency heterojunction crystalline Si solar cells10.7567/JJAP.57.08RB20 ↗
13. Notice of Removal Microcrystalline silicon carrier collectors for silicon heterojunction solar cells and impact on low-temperature device characteristics
14. Laser contact openings for local poly-Si-metal contacts enabling 26.1%-efficient POLO-IBC solar cells10.1016/j.solmat.2018.06.020 ↗
15. Tunnel oxide passivated contacts as an alternative to partial rear contacts10.1016/j.solmat.2014.06.015 ↗
16. n-Type Si solar cells with passivating electron contact: identifying sources for efficiency limitations by wafer thickness and resistivity variation10.1016/j.solmat.2017.05.042 ↗
17. Osborne · 2018
18. Superior performance of V2O5 as hole selective contact over other transition metal oxides in silicon heterojunction solar cells10.1016/j.solmat.2017.04.042 ↗
19. Transition metal oxides as hole-selective contacts in silicon heterojunctions solar cells10.1016/j.solmat.2015.08.028 ↗
20. Interface analysis and intrinsic thermal stability of MoOx based hole-selective contacts for silicon heterojunction solar cells10.1016/j.solmat.2019.110074 ↗
21. Fabrication of CuI/a-Si:H/c-Si structure for application to hole-selective contacts of heterojunction Si solar cells
22. 22.5% efficient silicon heterojunction solar cell with molybdenum oxide hole collector10.1063/1.4928747 ↗
23. 22% efficient dopant-free interdigitated back contact silicon solar cells
24. ITO/MoOx/a-Si:H(i) hole-selective contacts for silicon heterojunction solar cells: degradation mechanisms and cell integration10.1109/JPHOTOV.2017.2756066 ↗
25. Stable dopant-free asymmetric heterocontact silicon solar cells with efficiencies above 20%10.1021/acsenergylett.7b01279 ↗
26. Selectivity issues of MoOx based hole contacts
27. Toward annealing-stable molybdenum-oxide-based hole-selective contacts for silicon photovoltaics10.1002/solr.201700227 ↗
28. High-performance TiO2 -based electron-selective contacts for crystalline silicon solar cells10.1002/adma.201600926 ↗
29. High-performance TiO2-based electron-selective contacts for crystalline silicon solar cells10.1002/adma.201600926 ↗
30. Implementation of full-area-deposited electron-selective TiO x layers into silicon solar cells10.1063/1.5061924 ↗
31. Tantalum oxide electron-selective heterocontacts for silicon photovoltaics and photoelectrochemical water reduction10.1021/acsenergylett.7b01153 ↗
32. Tantalum nitride electron-selective contact for crystalline silicon solar cells10.1002/aenm.201800608 ↗
33. Dual-function electron-conductive, hole-blocking titanium nitride contacts for efficient silicon solar cells10.1016/j.joule.2019.03.008 ↗
34. Lithium fluoride based electron contacts for high efficiency n-type crystalline silicon solar cells10.1002/aenm.201600241 ↗
35. Dopant-free partial rear contacts enabling 23% silicon solar cells10.1002/aenm.201803367 ↗
36. Magnesium fluoride electron-selective contacts for crystalline silicon solar cells10.1021/acsami.6b03599 ↗
37. A low resistance calcium/reduced titania passivated contact for high efficiency crystalline silicon solar cells10.1002/aenm.201602606 ↗
38. Contact resistivity reduction on lowly-doped n-type Si using a low work function metal and a thin TiOX interfacial layer for doping-free Si solar cells10.1016/j.egypro.2017.09.356 ↗
39. Electron-selective contact using i-a-Si:H/TiOx/Yb/Ag stack for silicon heterojunction solar cells
40. Passivating electron-selective contacts for silicon solar cells based on an a-Si:H/TiOx stack and a low work function metal10.1002/pip.3023 ↗
41. Performance and thermal stability of an a-Si:H/TiO x/Yb stack as an electron-selective contact in silicon heterojunction solar cells10.1021/acsaem.8b01969 ↗
42. Exploring co-sputtering of ZnO:Al and SiO 2 for efficient electron-selective contacts on silicon solar cells10.1016/j.solmat.2019.02.005 ↗
43. Atomic-layer deposited Nb 2 O 5 as transparent passivating electron contact for c-Si solar cells10.1016/j.solmat.2018.04.037 ↗
44. SnO2/Mg combination electron selective transport layer for Si heterojunction solar cells10.1016/j.solmat.2019.109996 ↗
45. Surface states and barrier heights of metal-amorphous silicon Schottky barriers10.1016/0038-1098(77)90999-1 ↗
46. Mönch · 2004
47. Fermi level depinning and contact resistivity reduction using a reduced titania interlayer in n-silicon metal-insulator-semiconductor ohmic contacts10.1063/1.4868302 ↗
48. Contact resistivity reduction on lowly-doped n-type Si using a low work function metal and a thin TiOx interfacial layer for doping-free Si solar cells
49. Evidence of TiOx reduction at the SiOx/TiOx interface of passivating electron-selective contacts
50. Thermal stability concern of metal-insulator-semiconductor contact: a case study of Ti/TiO 2/n-Si contact10.1109/TED.2016.2565565 ↗
51. Hydrogen reduction of molybdenum oxide at room temperature10.1038/srep40761 ↗
52. Transition metal oxide work functions: the influence of cation oxidation state and oxygen vacancies10.1002/adfm.201200615 ↗
53. Characterization of 23-percent efficient silicon solar cells10.1109/16.46361 ↗
54. Analyzing back contacts of silicon solar cells by suns-voc-measurements at high illumination densities
55. Metal/oxide interfacial reactions: oxidation of metals on SrTiO3 (100) and TiO2 (110)10.1021/jp050601i ↗