Inverted rear-heterojunction GaInP solar cells using Te memory effect
Source abstract
Abstract
Tellurium allows attaining heavy n-type doping levels in GaAs, which is suited to achieve very low contact resistivities in solar cells. Besides, it modifies the energy bandgap of MOVPE-grown GaInP by reducing the group-III sublattice ordering and presents a strong memory effect which induces residual n-type doping in subsequent layers, potentially detrimental to the performance of the solar cell. In this work, we present an inverted rear-heterojunction GaInP solar cell that employs a thick Te-doped GaInP layer as absorber, with a doping profile obtained exclusively by controlling the memory effect of Te coming from the preceding growth of a heavily doped GaAs contact layer. In this way, GaInP is partially disordered with the use of no additional surfactant, leading to an increase in the solar cell bandgap of around 35 meV as compared to traditional samples doped with silicon. In the proof-of-concept experimental devices developed so far, the use of a rear-heterojunction configuration and the bandgap increase results in a global open-circuit voltage enhancement of 109 mV. The photocurrent decreases by 1.32 mA/cm2, mostly due to the bandgap blue-shift, with about 0.35 mA/cm2 attributable to lower carrier collection efficiencies. These preliminary results are discussed by analyzing the I-V curve parameters and quantum efficiencies of a Te-doped rear-heterojunction, a Si-doped rear-heterojunction and a Si-doped front-junction solar cell. An additional advantage is that the emitter sheet resistance is reduced from 551 to 147 ohms/sq, which offers potential for higher efficiencies through lower front grid shadowing factors, as demonstrated with the concentrator measurements presented.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: solar cell performance optimization · Chalcogenide Semiconductor Thin Films · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Wafer bonded four-junction GaInP/GaAs//GaInAsP/GaInAs concentrator solar cells with 44.7% efficiency10.1002/pip.2475 ↗
2. High-efficiency multijunction solar cells employing dilute nitrides10.1063/1.4753823 ↗
3. Design flexibility of ultrahigh efficiency four-junction inverted metamorphic solar cells10.1109/JPHOTOV.2015.2505182 ↗
4. “40% efficient metamorphic GaInP∕GaInAs∕Ge multijunction solar cells10.1063/1.2734507 ↗
5. Effect of Sb on the properties of GaInP top cells
6. “Limiting factors on the semiconductor structure of III–V multijunction solar cells for ultra-high concentration (1000–5000 suns)10.1002/pip.2791 ↗
7. A direct comparison of inverted and non-inverted growths of GaInP solar cells
8. Analysis of tellurium as n-type dopant in GaInP: doping, diffusion, memory effect and surfactant properties10.1016/j.jcrysgro.2006.10.099 ↗
9. S. R. Kurtz, J. M. Olson, D. J. Friedman and R. Reedy, "Effect of front-surface doping on back-surface passivation in Ga0.5In0.5P cells," Conference Record of the Twenty Sixth IEEE Photovoltaic Specialists Conference - 1997, Anaheim, CA, USA, 1997, pp. 819-822.10.1109/PVSC.1997.654213 ↗
10. Ideal efficiency of monolithic, series-connected multijunction solar cells10.1002/pip.427 ↗
11. Effect of Sb on the quantum efficiency of GaInP solar cells10.1002/pip.2777 ↗
12. Effect of surfactant Sb on carrier lifetime in GaInP epilayers10.1063/1.1423396 ↗
13. Ordering dependence of carrier lifetimes and ordered states of Ga0.52In0.48P/GaAs with degree of order ⩽0.5510.1063/1.1322592 ↗
14. Enhanced external radiative efficiency for 20.8% efficient single-junction GaInP solar cells10.1063/1.4816837 ↗
15. Schubert · 1993
16. Kinetics of Te doping in disodering GaInP grown by organometallic vapor phase epitaxy10.1063/1.1416857 ↗
17. Analysis of tellurium as n-type dopant in GaInP: doping, diffusion, memory effect and surfactant properties10.1016/j.jcrysgro.2006.10.099 ↗
18. Low temperature annealed Pd/Ge/Ti metal systems for concentrator inverted metamorphic solar cells10.1063/1.5053506 ↗
19. “High-efficiency GaInP∕GaAs∕InGaAs triple-junction solar cells grown inverted with a metamorphic bottom junction10.1063/1.2753729 ↗
20. CASINO: a new monte carlo code in C language for electron beam interaction —part I: description of the program10.1002/sca.4950190101 ↗
21. A method of measuring specific resistivity and hall effect of discs of arbitrary shape
22. Growth of order/disorder heterostructures in GaInP using a variation in V/III ratio10.1007/s11664-997-0028-5 ↗
23. Ordering and disordering of doped Ga0.5In0.5P10.1007/BF02671225 ↗
24. Influence of GaInP ordering on the electronic quality of concentrator solar cells10.1016/j.jcrysgro.2008.08.009 ↗
25. “Effect of mismatch strain on band gap in III‐V semiconductors10.1063/1.334817 ↗
26. Incorporating photon recycling into the analytical drift-diffusion model of high efficiency solar cells10.1063/1.4902320 ↗
27. Hovel · 1975
28. Refractive indexes and extinction coefficients of n- and p-type doped GaInP, AlInP and AlGaInP for multijunction solar cells10.1016/j.solmat.2017.09.028 ↗
29. Minority carrier recombination of ordered Ga0.51In0.49P at high temperatures10.1063/1.4971282 ↗
30. Identification of the limiting factors for high-temperature GaAs, GaInP, and AlGaInP solar cells from device and carrier lifetime analysis10.1063/1.5003631 ↗
31. Double heterostructures for characterization of bulk lifetime and interface recombination velocity
32. Enhanced external radiative efficiency for 20.8% efficient single-junction GaInP solar cells10.1063/1.4816837 ↗
33. Reciprocity relation between photovoltaic quantum efficiency and electroluminescent emission of solar cells10.1103/PhysRevB.76.085303 ↗
34. Radiative efficiency of state-of-the-art photovoltaic cells10.1002/pip.1147 ↗
35. “Detailed balance limit of efficiency of p‐n junction solar cells10.1063/1.1736034 ↗
36. Comparing front- and rear-junction GaInP photovoltaic devices through detailed numerical and analytical modeling
37. Carrier generation and recombination in P-N junctions and P-N junction characteristics10.1109/JRPROC.1957.278528 ↗
38. A 3-D model for concentrator solar cells based on distributed circuit units10.1109/TED.2005.859620 ↗
39. Study of non-uniform light profiles on high concentration III–V solar cells using quasi-3D distributed models
40. Analysis of chromatic aberration effects in triple-junction solar cells using advanced distributed models10.1109/JPHOTOV.2011.2171671 ↗
41. A 32.6% efficient lattice-matched dual-junction solar cell working at 1000 suns10.1063/1.3078817 ↗
42. Development of the Lattice Matched GaInP/GaInAs/Ge Triple Junction Solar Cell with an Efficiency Over 40%
43. Performance of III–V solar cells as indoor light energy harvesters10.1109/JPHOTOV.2015.2487825 ↗
44. Maximizing tandem solar cell power extraction using a three-terminal design10.1039/C8SE00133B ↗
45. Three-terminal heterojunction bipolar transistor solar cell for high-efficiency photovoltaic conversion10.1038/ncomms7902 ↗