journal article·2019-09

Enhanced electrical conductivity of transparent electrode using metal microfiber networks for gridless thin-film solar cells

Dae-Hyung Cho, Hong Seok Jo, Woo-Jung Lee, Tae-Gun Kim, Byungha Shin, Sam S. Yoon, Yong-Duck Chung

Publisher page

Abstract

Abstract Improving the optical transmittance and electrical conductivity in transparent conductors (TC) has been a critical issue for decades due to their numerous applications. In this paper, we suggest an approach to produce extremely conductive TC material from electroplated Ni microfiber networks (NiMFs) in order to achieve highly efficient and aesthetically superior thin-film solar cells and modules. The high cross-sectional aspect ratio of NiMFs significantly enhanced their electrical conductivity and optical transmittance simultaneously. The TC structure employing NiMFs was a successful substitute for conventional patterned grids in Cu(In,Ga)Se2 thin-film solar cells because it reduced the series resistance, which is especially advantageous for large-area cells. The NiMF-induced transmittance loss was compensated for by the formation of a light diffusion layer on the NiMF. We propose that the excellent performance of NiMF TC materials enables the elimination or significant reduction of the grids in thin-film solar cells and modules.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thin-Film Transistor Technologies · Nanomaterials and Printing Technologies · ZnO doping and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Emerging transparent electrodes based on thin films of carbon nanotubes, graphene, and metallic nanostructures10.1002/adma.201003188 ↗
2. Robust nanoscale contact of silver nanowire electrodes to semiconductors to achieve high performance chalcogenide thin film solar cells10.1016/j.nanoen.2018.09.027 ↗
3. Silver nanowire networks as flexible, transparent, conducting films: extremely high DC to optical conductivity ratios10.1021/nn900348c ↗
4. Comparing the fundamental physics and device performance of transparent, conductive nanostructured networks with conventional transparent conducting oxides10.1002/aenm.201100608 ↗
5. Transparent, conductive carbon nanotube films10.1126/science.1101243 ↗
6. Roll-to-roll production of 30-inch graphene films for transparent electrodes10.1038/nnano.2010.132 ↗
7. High figure-of-merit ultrathin metal transparent electrodes incorporating a conductive grid10.1063/1.3299259 ↗
8. Facile fabrication of flexible in-plane graphene micro-supercapacitor via flash reduction10.4218/etrij.2017-0242 ↗
9. Investigation of dual-ion beam sputter-instigated plasmon generation in TCOs: a case study of GZO10.1021/acsami.7b15103 ↗
10. Low-temperature solution processed random silver nanowire as a promising replacement for indium tin oxide10.1021/acsami.7b13085 ↗
11. Impact of sputter-instigated plasmonic features in TCO films: for ultrathin photovoltaic applications10.1063/1.4978269 ↗
12. Spray deposition of highly transparent, low-resistance networks of silver nanowires over large areas10.1002/smll.201100647 ↗
13. Scalable coating and properties of transparent, flexible, silver nanowire electrodes10.1021/nn1005232 ↗
14. Large anisotropy of electrical properties in layer-structured In2Se3 nanowires10.1021/nl080524d ↗
15. Record efficiency for thin-film polycrystalline solar cells up to 22.9% achieved by Cs-treated Cu(in,Ga)(Se,S)210.1109/JPHOTOV.2018.2882206 ↗
16. Effects of heavy alkali elements in Cu(In,Ga)Se2 solar cells with efficiencies up to 22.6%10.1002/pssr.201600199 ↗
17. Large-area CIGS modules: pilot line production and new developments10.1016/j.solmat.2006.06.052 ↗
18. Approaches to flexible CIGS thin-film solar cells10.1016/j.tsf.2004.11.063 ↗
19. Monolithically integrated flexible Cu(In,Ga)Se2 solar cells and submodules using newly developed structure metal foil substrate with a dielectric layer10.1016/j.solmat.2013.01.016 ↗
20. Mass production of p-type Cz silicon solar cells approaching average stable conversion efficiencies of 22 %10.1016/j.egypro.2017.09.308 ↗
21. Required material properties for high-efficiency CIGS modules10.1117/12.828365 ↗
22. Optimum design of dye-sensitized solar module for building-integrated photovoltaic systems10.4218/etrij.2017-0088 ↗
23. Corrosion at the Nanoscale: the case of silver nanowires and nanoparticles10.1021/cm051532n ↗
24. Silver nanowire-based transparent, flexible, and conductive thin film10.1186/1556-276X-6-75 ↗
25. Flexible transparent conducting composite films using a monolithically embedded AgNW electrode with robust performance stability10.1039/C3NR05348B ↗
26. A new transparent conductor: silver nanowire film buried at the surface of a transparent polymer10.1002/adma.201001811 ↗
27. Highly flexible, stretchable, patternable, transparent copper fiber heater on a complex 3D surface10.1038/am.2016.206 ↗
28. Silver-decorated and palladium-coated copper-electroplated fibers derived from electrospun polymer nanofibers10.1016/j.cej.2017.06.076 ↗
29. Self-junctioned copper nanofiber transparent flexible conducting film via electrospinning and electroplating10.1002/adma.201506364 ↗
30. Characterization of bilayer AZO film grown by low-damage sputtering for Cu(In,Ga)Se2 solar cell with a CBD-ZnS buffer layer10.1016/j.mssp.2018.03.008 ↗
31. Effects of Ga concentration in Cu(In,Ga)Se2 thin film solar cells with a sputtered-Zn(O,S) buffer layer10.1016/j.solener.2016.08.054 ↗
32. Photovoltaic performance and interface behaviors of Cu(in,Ga)Se2 solar cells with a sputtered-Zn(O,S) buffer layer by high-temperature annealing10.1021/acsami.5b04815 ↗
33. Non-toxically enhanced sulfur reaction for formation of chalcogenide thin films using a thermal cracker10.1039/C4TA02507E ↗
34. Electronic effect of Na on Cu(In,Ga)Se2 solar cells10.1063/1.4733679 ↗
35. Behavior of photocarriers in the light-induced metastable state in the p-n heterojunction of a Cu(in,Ga)Se2 solar cell with CBD-ZnS buffer layer10.1021/acsami.6b05005 ↗
36. Scaling theory of percolation clusters
37. Transparent conducting silver nanowire networks10.1021/nl301045a ↗
38. Lithographically patterned nanowire electrodeposition10.1038/nmat1759 ↗
39. Electrical-resistivity model for polycrystalline films: the case of arbitrary reflection at external surfaces10.1103/PhysRevB.1.1382 ↗
40. New figure of merit for transparent conductors10.1063/1.323240 ↗
41. Improvement of transparent conducting nanotube films by addition of small quantities of graphene10.1021/nn100542z ↗
42. Metal grid/conducting polymer hybrid transparent electrode for inverted polymer solar cells10.1063/1.3394679 ↗
43. Electrical connectivity in single-walled carbon nanotube networks10.1021/nl9020914 ↗
44. Transparent metal network with low haze and high figure of merit applied to front and back electrodes in semitransparent ITO-free polymer solar cells10.1002/ente.201500014 ↗
45. Spectral response of CuGaSe2/Cu(in,Ga)Se2 monolithic tandem solar cell with open-circuit voltage over 1 V
46. Indium-Tin-Oxide transparent conducting coatings on silicon solar cells and their “figure of merit”10.1016/0165-1633(81)90038-1 ↗
47. Solar cell efficiency tables (version 39)10.1002/pip.2163 ↗
48. Light coupling and trapping in ultrathin Cu(in,Ga)Se2 solar cells using dielectric scattering patterns10.1021/acsnano.5b04091 ↗
49. Optical confinement in chalcopyrite based solar cells10.1016/j.tsf.2016.08.056 ↗
50. Analysis of the current-voltage curves of a Cu(In,Ga)Se2 thin-film solar cell measured at different irradiation conditions10.3807/JOSK.2010.14.4.321 ↗
51. Chapter 8. Design of silicon solar cells